This may give you an idea. Jim B, -- Jim B

Purchased this in my late 40's. Now in my early 70"s and got it all level to .0005" on what is left of the 4 1/2ft bed. All cleaned up and ready to learn how to make chips. The only thing I never took

Hi There, I have some extra jaws for the Telescoping Steady Rest. These are new. These are left overs from a rebuilding program I had a few years ago. These jaws fit 9 inch, 10K and Heavy Ten Telescop

Hi everyone. I need a pinion and spring for a Last Word. Anyone have a resource? Starrett seems to be useless. Thanks, Payson.

Heres some info I saved for getting one of my indicators repaired . I Have Not Used Any Of These Folks Yet . animal 1 precrepair Aug 24, 2012 I'll repair your Indicator for $35.00 plus shipping both w

I'd like to replace the large tension spring on my 10k -- this is the lathe that went through a fire, and it seems that the spring isn't returning quite like it should. It surely tempered in the fire

Good morning all. Anybody out there happen to have a 5C collet spindle adapter sleeve, OR a spindle thread nose protector, OR a yoke bracket for the lever type collet closer that they are dying to sel

I am working on a mystery,and thought I would ask you all before I start taking things apart. It’s a Heavy 10 with taper attachment, large dials, thrust washers installed, etc.. When I make an adjustm

Gentleman, Always appreciate the collective wisdom here. Looking at a 1946, I believe 10L with UMD, the stand is the steel type with the U shaped legs. It is a Navy ship lathe I'm told, it has the J.A

I have a working SB10H, Only problems I took it apart about 10 years ago. And then I went to my next shiny object. No time to put it back together. ----------------------------------------------------

Afternoon all. This is my 1st time posting on this particular group, though I have been a part of the Rockwell Milling Group for some time. I recently purchased a South Bend 10 Heavy and am looking fo

I'm looking to get a scotch type wheel for one of my bench grinders . Anyone have any experience with them , ones to stay away from or ones to look at ? thanks animal

No affiliation , I just got a email from them https://www.ctctools.biz/ animal

I thought this was pretty interesting https://www.youtube.com/watch?v=cQDkqLz4Sug&ab_channel=adamthemachinist animal

Hope you're keeping safe out there? Need to ask a favor, waiting for your email as I'm currently unavailable over the phone. Thanks, J Evans Jennings Jr

this post titled Favor also came in on the Craftsman Atlas lathe forum please ignore

Hello All, Selling my house and closing that was supposed to be in five weeks is in five days. I’ve had these two South Bend leads that I picked up over the years with the intent of restoration for a

I was doing a oil change of the oil in the headstock. After removing the two pipe plugs located below the two oil cups, I somehow managed to loose one of the plugs! I have spent hours searching for th

A bud asked me to come over & look at his lathe a South Bend 9A . It's one of the fancy ones large dials spindle cover on the headstock & came with a taper attachment . The Numbers on the change gear

I stumbled across this late this afternoon. Can't believe it took nearly 7 decades of wrenching. Using this product as it as intended for 50yrs or more. And just FINALLY figured out what a Great Rust