QCTP Holders
|
G K
Afternoon,
I just recently acquired a QCTP (Phase 2 250-100) for my SB9c that came with a few holders. 250-202, 250-207, and 250-110. I will be needing additional holders, but am confused on what model to get. From what i have found the 250-100 holder is AXA and will work on a 9-inch lathe. However, what I have also found is the the 250-202 holder is actually for a BXA post, which is too big for a 9-inch lathe. Will either or the 250-202 or 250-101 work on the 9-inch SB? What size/designation should I be shopping for, and where would you guys suggest I look? Thanks, Greg |
|
|
|
Andrei
101 will, 201 will not
From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of G K via groups.io <bug_hunter2000@...>
Sent: Sunday, January 29, 2023 1:40 PM To: SouthBendLathe@groups.io <SouthBendLathe@groups.io> Subject: [SouthBendLathe] QCTP Holders Afternoon,
I just recently acquired a QCTP (Phase 2 250-100) for my SB9c that came with a few holders. 250-202, 250-207, and 250-110. I will be needing additional holders, but am confused on what model to get. From what i have found the 250-100 holder is AXA and will work on a 9-inch lathe. However, what I have also found is the the 250-202 holder is actually for a BXA post, which is too big for a 9-inch lathe. Will either or the 250-202 or 250-101 work on the 9-inch SB? What size/designation should I be shopping for, and where would you guys suggest I look? Thanks, Greg |
|
|
|
mike allen
The difference between a 201 vs a 202 is the 202 has a V cut in the bottom of the tool slot so you could also hold a boring bar or a round tool . Keep in mind if you have a 202 holder you cant use the smaller tool bits cause they will teeter in the groove . animal On 1/29/2023 10:40 AM, G K via
groups.io wrote:
Afternoon, |
|
|
|
mike allen
Hit send too fast too fast On 1/29/2023 10:54 AM, mike a wrote:
|
|
|
|
mike allen
Here's a page with all the dimensions of the 4 main sizes of QCTP's https://www.ctctools.biz/quick-change-toolpost-set-6pcs-wedge-type-l137/ I bought my AXA wedge type QCTP for my SB 9A from CDCO Machinery http://www.cdcotools.com/ . Depending on where you get one , If you have the $$ when you order you might want to get some extra tool holders with that purchase the freight will be some cheaper then buying then separately . animal On 1/29/2023 10:40 AM, G K via
groups.io wrote:
Afternoon, |
|
|
|
Great info there, Mike! Thanks for sharing it! Bill in OKC William R. Meyers, MSgt, USAF(Ret.) Aphorisms to live by: Good judgement comes from experience. Experience comes from bad judgement. SEMPER GUMBY! Physics doesn't care about your schedule. The only reason I know anything is because I've done it wrong enough times to START to know better
On Sunday, January 29, 2023 at 01:53:34 PM CST, mike allen <animal@...> wrote:
Here's a page with all the dimensions of the 4 main sizes of QCTP's https://www.ctctools.biz/quick-change-toolpost-set-6pcs-wedge-type-l137/ I bought my AXA wedge type QCTP for my SB 9A from CDCO Machinery http://www.cdcotools.com/ . Depending on where you get one , If you have the $$ when you order you might want to get some extra tool holders with that purchase the freight will be some cheaper then buying then separately . animal On 1/29/2023 10:40 AM, G K via
groups.io wrote:
Afternoon, I just recently acquired a QCTP (Phase 2 250-100) for my SB9c that came with a few holders. 250-202, 250-207, and 250-110. I will be needing additional holders, but am confused on what model to get. From what i have found the 250-100 holder is AXA and will work on a 9-inch lathe. However, what I have also found is the the 250-202 holder is actually for a BXA post, which is too big for a 9-inch lathe. Will either or the 250-202 or 250-101 work on the 9-inch SB? What size/designation should I be shopping for, and where would you guys suggest I look? Thanks, Greg |
|
|