9 A-C Milling attachment FS on PM Forum
|
mike allen
I just posted a Milling attachment for a 9 A-C over on the
Practical Machinist forum . https://www.practicalmachinist.com/forum/threads/south-bend-9-a-c-milling-attachment-fs.409661/ thanks animal |
|
|
|
Those can be great for small work. A friend of mine who’s passed away, was a Maker and repairman of stringed instrument bows. He did much of his machining on his South Bend A, with a milling attachment. Payson. |
|
|
|
Ruth Busch
I have a Palmgren 250 milling attachment that I have used on a heavy 10. I am entertaining selling it this summer when I am back home. Looking for around $260.00.
jbusch@...
John On Sat, 21 Jan, 2023 at 4:29 PM, Payson <egreene104@...> wrote: To: southbendlathe@groups.io Those can be great for small work. A friend of mine who’s passed away, was a Maker and repairman of stringed instrument bows. He did much of his machining on his South Bend A, with a milling attachment. Payson. |
|
|
|
For some very limited and light work I often use my QC Tool post.
toggle quoted message
Show quoted text
It has a little vertical adjustment.  That’s a ball endmill.  Jim B A short slot  Fits the foot of an Automobile Mascot.  Sorry, no closeup. On Jan 21, 2023, at 6:29 PM, Payson <egreene104@...> wrote:
--
Jim B |
|
|
|
I have a milling machine, but, some jobs are still done on the lathe with my double swivel milling slide, did think once in a senior moment that I could do without it, but a job came to me soon after which was better done on the lathe using this attachment, so, half a dozen times a year, wouldn’t do without it, I would keep it unless I had two.
|
|
|
|
Proper Pilots motor.
|
|
|
|
Old school tool centre finding device, metal 6” rule, use this method every day.
|
|
|
|
Davis Johnson
I have long wanted a T-slot plate (table?) for my QCTP. You may
have inspired me to actually do it. On 1/21/23 20:13, Jim_B wrote:
For some very limited and light work I often use my QC Tool post. |
|
|
