SouthBendLathe For Sale


Ron Pare
 

9 inch South Bend lathe for sale, set up on original “work bench”, 3 and 4 jaw chucks, several face plates, tool posts,  and a fair amount of tooling, 120/240 single phase, good condition, 9x36” tool room model.    $1,000   anirwinw43@...   just north of Boston, MA


Andrei
 

Pictures?


From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of Ron Pare <rppare@...>
Sent: Sunday, June 5, 2022 10:35:11 AM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: [SouthBendLathe] SouthBendLathe For Sale
 

9 inch South Bend lathe for sale, set up on original “work bench”, 3 and 4 jaw chucks, several face plates, tool posts,  and a fair amount of tooling, 120/240 single phase, good condition, 9x36” tool room model.    $1,000   anirwinw43@...   just north of Boston, MA


Ron Pare
 

Here you go.

 

From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> On Behalf Of Andrei
Sent: Sunday, June 5, 2022 10:38 AM
To: SouthBendLathe@groups.io
Subject: Re: [SouthBendLathe] SouthBendLathe For Sale

 

Pictures?

 


From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of Ron Pare <rppare@...>
Sent: Sunday, June 5, 2022 10:35:11 AM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: [SouthBendLathe] SouthBendLathe For Sale

 

9 inch South Bend lathe for sale, set up on original “work bench”, 3 and 4 jaw chucks, several face plates, tool posts,  and a fair amount of tooling, 120/240 single phase, good condition, 9x36” tool room model.    $1,000   anirwinw43@...   just north of Boston, MA


jonwoellhaf
 

Beautiful lathe. I wish I were closer (Utah). $1000 is too little, I think. Someone is going to be delighted!
 
From: Ron Pare
Sent: June 5, 2022 08:35
To: SouthBendLathe@groups.io
Subject: [SouthBendLathe] SouthBendLathe For Sale
 

9 inch South Bend lathe for sale, set up on original “work bench”, 3 and 4 jaw chucks, several face plates, tool posts,  and a fair amount of tooling, 120/240 single phase, good condition, 9x36” tool room model.    $1,000   anirwinw43@...   just north of Boston, MA


jordie Field
 

Thank you….I am from Chicago so it is a little far…..a few weeks ago my daughter just had her grad ceremony from Smith college….that could of worked out…


On Jun 5, 2022, at 11:23 AM, Ron Pare <rppare@...> wrote:



Here you go.

 

From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> On Behalf Of Andrei
Sent: Sunday, June 5, 2022 10:38 AM
To: SouthBendLathe@groups.io
Subject: Re: [SouthBendLathe] SouthBendLathe For Sale

 

Pictures?

 


From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of Ron Pare <rppare@...>
Sent: Sunday, June 5, 2022 10:35:11 AM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: [SouthBendLathe] SouthBendLathe For Sale

 

9 inch South Bend lathe for sale, set up on original “work bench”, 3 and 4 jaw chucks, several face plates, tool posts,  and a fair amount of tooling, 120/240 single phase, good condition, 9x36” tool room model.    $1,000   anirwinw43@...   just north of Boston, MA

100_0833.JPG100_0836.JPG


john kling
 

This lathe looks a little beefier then the workshop model A lathe. Is it from heavy 10 and heavy 9 linage?

On Sunday, June 5, 2022, 06:55:25 PM EDT, jordie Field <jordie.field19@...> wrote:


Thank you….I am from Chicago so it is a little far…..a few weeks ago my daughter just had her grad ceremony from Smith college….that could of worked out…


On Jun 5, 2022, at 11:23 AM, Ron Pare <rppare@...> wrote:



Here you go.

 

From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> On Behalf Of Andrei
Sent: Sunday, June 5, 2022 10:38 AM
To: SouthBendLathe@groups.io
Subject: Re: [SouthBendLathe] SouthBendLathe For Sale

 

Pictures?

 


From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of Ron Pare <rppare@...>
Sent: Sunday, June 5, 2022 10:35:11 AM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: [SouthBendLathe] SouthBendLathe For Sale

 

9 inch South Bend lathe for sale, set up on original “work bench”, 3 and 4 jaw chucks, several face plates, tool posts,  and a fair amount of tooling, 120/240 single phase, good condition, 9x36” tool room model.    $1,000   anirwinw43@...   just north of Boston, MA

100_0833.JPG100_0836.JPG


Payson
 

I'm real close, in Woburn. Wow. I paid $600 for my 10K in the early 80s. I'm asking a few friends.

Payson.


Ron Pare
 

Let me know if you want to come and see it.

Ron

 

From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> On Behalf Of Payson
Sent: Wednesday, June 8, 2022 2:04 PM
To: SouthBendLathe@groups.io
Subject: Re: [SouthBendLathe] SouthBendLathe For Sale

 

I'm real close, in Woburn. Wow. I paid $600 for my 10K in the early 80s. I'm asking a few friends.

Payson.


Payson
 

Thanks for the offer Ron. I've asked around but not had any positive feedback. I have a friend in Waltham with a used tool store. Maybe you know him. If that's an option, he's Andy at Tool Shed. I should think you can find a buyer at that price. Boston Craigslist only has a Jet, for $2850.

Good luck,

Payson.