Introduction/Information #poll
|
ART
Hey John: Welcome. Lots of good information here. Try the attached documents. Capt. Art
On Thursday, June 24, 2021, 10:33:11 AM EDT, Hamm <jchammonds@...> wrote:
[Edited Message Follows] A poll has been updated: Good day to you all, this is my first post since joining the group. The reason I joined the group is because I’m not having very good success at finding information on the particular lathe I have. My South Bend lathe is a, Horizontal Model 9A 16 speed with v-belt drive, probably 1950’s vintage, I purchased a Full Rebuild Package from eBay/ By ILION Industrial Services which contained a Manual, Felts, Oil, and Grease for the 9” lathe. The manual does not reference anything later than 1940’s models, primarily the V-Belt drive system. Does anyone know where I can find information on this lathe? Catalog No. CL 744 A, S/N 49636 NAR 10. Thanks, John Hammonds
1. Don't Know Do not reply to this message to vote in the poll. You can vote in polls only through the group's website.
|
|
|
|
Andrei
John,
Your lathe is designated as such:
CL = threaded spindle nose
no single digit after CL means it is
a workshop lathe, not a toolroom lathe
744 = 9" Model A, 16-Speed, V-belt bench lathe, Horizontal Motor Drive (HMD)
with full quick change gear mechanism
NAR meaning:
N
= 9 inch
A
= quick change gear
R
= regular spindle hole, standard swing
1947 to 1968 production window
10 = model number (factory designation) that gets changed with model improvements.
CE3455 = the parts list catalog for models A, B,
and C
From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of Steven H via groups.io <stevesmachining@...>
Sent: Friday, April 24, 2020 1:31 PM To: SouthBendLathe@groups.io <SouthBendLathe@groups.io> Subject: Re: [SouthBendLathe] Introduction/Information #poll Try www.wswells.com, www.vintagemachinery.org, and www.lathes.co.uk
Steve Haskell
On Apr 24, 2020, at 11:31 AM, jchammonds@... wrote:
|
|
|
|
Try www.wswells.com, www.vintagemachinery.org, and www.lathes.co.uk
toggle quoted messageShow quoted text
Steve Haskell
On Apr 24, 2020, at 11:31 AM, jchammonds@... wrote:
|
|
|
|
Good day to you all, this is my first post since joining the group. The reason I joined the group is because I’m not having very good success at finding information on the particular lathe I have. My South Bend lathe is a, Horizontal Model 9A 16 speed with v-belt drive, probably 1950’s vintage, I purchased a Full Rebuild Package from eBay/ By ILION Industrial Services which contained a Manual, Felts, Oil, and Grease for the 9” lathe. The manual does not reference anything later than 1940’s models, primarily the V-Belt drive system. Does anyone know where I can find information on this lathe? Catalog No. CL 744 A, S/N 49636 NAR 10. Thanks, John Hammonds
|
|
|