http://stemcellofatlanta.com/unsyqps.php?ldeco58148 ---------------- From : ldeco58148 12/11/2015 12:51:41 PM

http://sourclothing.com/lqhqbbms.php?ldeco58148 **************************** 6/9/2015 1:42:25 PM From: ldeco58148

SB heavy 10 my belt started sliding off the pully under ligth load. Cutting steel have been using the lathe with out this problem. Cutting aluminum Now its happens often Ser# 20242 R Cat. CL 187ZB Hel

Hi Jim you sent me the links on this , my computer deleted them. would you be kind enough to sent it again. sorry about that. Lou

Hi guy's My apron stops moving, when I have the feed engaged. I lift the engagement lever a little harder and the travel starts again. Its a heavy 10 1975 vintage. The lead screw does not stop. It hap

One more thing. Should I wire the GE unit on the load side of the AB relay, in between the motor? Sent from my Verizon Wireless 4G LTE DROID "Jim B. " <btdtrf@...> wrote: According to the NEC

Thanks for the info Sent from my Verizon Wireless 4G LTE DROID "Jim B. " <btdtrf@...> wrote: According to the NEC Wire Size…………..Ampacity #14…………………15 Amp #16………………….10 Amp #18……………………5 Amp I

Good question 230V 3 phase. I believe the out put side. Juice going into the motor. Sent from my Verizon Wireless 4G LTE DROID "m. allan noah" <kitno455@...> wrote: For which side? the VFD input

I just got a VS control. I have a 1 hp motor with a 4.5 amp draw. What wire size should I use. Southbend heavy 10 Sent from my Verizon Wireless 4G LTE DROID

T slot Were you located? I have a milling machine and just had to do the same thing. Lou If you like you can send it to me. Sent from my Verizon Wireless 4G LTE DROID

If you can't find anyone to cut your tee nut.you can send it to me. I have a milling machine. Lou Sent from my Verizon Wireless 4G LTE DROID

Sorry my bad. I though you mentioned back gear Sent from my Verizon Wireless 4G LTE DROID

No the back gear is for slow speed. Nothing to do with the lead screw. You need to place those levers in the speed you would like the travel in. The lever forward or reverse is just that. Sent from my

Thanks Sent from my Verizon Wireless 4G LTE DROID

Was it glued? Sent from my Verizon Wireless 4G LTE DROID

Yes its a under mount motor. But the belt looks one piece or continuous Heavy 10 X 36 Sent from my Verizon Wireless 4G LTE DROID

I would think you would have to remove the upper cone pulley to in stall the continuous belt. Have you done this? Sent from my Verizon Wireless 4G LTE DROID

So if you use a auto belt would you put the ribs facing up or down Sent from my Verizon Wireless 4G LTE DROID

heavy 10 were can I get a manual. I'm starting from the begining.