Peter, How is your dad, is there anything you need from the group? I'd be glad to help. Steve Wells

Hi, Bill Yes, I got the picture and thanks. It is a match to Denny's plate. Now you just might have a lathe that is a bit rarer, the serial number puts it in 1935 maybe October, I think Denny has one

Denny, I forgot to tell you about this item: ebay 170091546357 Never heard of a 1933 Model C so this is a tool maker turning gear, can't tell if the bore is screwed up or if that is crud. He gives a t

Sandy, Depending on the conditions you mentioned, I would suggest you make sure you have the bench or whatever the lathe is mounted on sprayed with a quality substrate epoxy two part primer. You can h

Rudd, Set you compound on angle at lets say 30 degrees right and always try and feed towards the head stock if the cut allows, square you tool or tool post to the work or chuck. If your cutting to a s

Tom, Here's the link to the shifter photos, this is for Denny's 1927 Junior. He's the Teacher, so I don't think he will mind if his Student shows the in progress work, I still have to brush down the f

Check this MSC page to find the correct size, use the boston gear bearings if you want a match for ball bearing thrust, read back through the messages for a conversion to a needle roller in front. See

Chris, I get them, but it seems to be only one bounce and they are removed, but I also believe an attachment large file size will cause some mail SMTP servers to reject the message. Try sending a big

here's one of the Yahoo Mailer-Daemons, n11.bullet.sp1.yahoo and the bounce... Sorry, we were unable to deliver your message to the following address. <reubens54@...>: Remote host said: 550 Reques

Well, that was not true, here's two that state size: >>>>> * Sorry, we were unable to deliver your message to the following address. <olowesky@...>: Remote host said: 554 delivery error: dd Sorr

Tom, can you give us the ID and OD measurements of your bearings, A picture of the screw, dial and bushing with measurements would be nice. The larger needle bearing would replace the ball thrusts if

Jim, Computers don't care what we think....LOL I would assume that we have one group managed mail domain, and it maintains a mailing list of our address' when we send a group message it captures the s

Bill, I think you need to update you Virus software and run a full virus scan on your PC. There are free scanners on the Internet, but can be quite time consuming. I've always found it best to have th

Bill, I am proficient in all versions of Symantec AntiVirus Corporate Edition. If you want to send me a screen capture of the virus warning and what E-mail program you are using, I will take a look at

Cal, Denny Here are some December 1935 shots of the new "improved" 1936 Workshop These are from the Workshop Catalog 15-R page 14 and 15. Denny, end door shots of threading plate...I think you have on

Ya think I Maybe should attach the pictures...ha Steve

Cal, yep, I'll do the whole thing for you...just give me a few days to learn how to reduce the PDF file...I started it and the page files are huge...It has color in the pages and I was trying to get a

Group, Ok, here's little key board short cut that I use.... when replying to a group e-mail and if you don't want the prior mail text to show in your message. after you hit the reply button your curso

Chris, Another one I love to use is Ctrl-F for searching a page, this makes short work of reading the whole text on a web page. SW

Chris, Here's a special one just for you...:) "Excel Geek O-Roma" copy the two books somewhere together, desktop is fine.. open book one, before you hit the fill button, open the VB code, go to Tools-