Date   
Re: For Sale and Wanted items

druid_noibn
 

Bill, et al.,

Agreed - I will not be a member of FB...

Kind regards,
DBN aka John

On Saturday, November 9, 2019, 2:59:40 PM EST, Bill in OKC too via Groups.Io <wmrmeyers@...> wrote:


Problem with that is that some of us will not use FB for reasons that seem good to us. Like me. I flatly won't use it for anything.

Bill in OKC
On Saturday, November 9, 2019, 1:30:57 PM CST, Sam <i.am.sam.sam.i.am2008@...> wrote:


Re: For Sale and Wanted items

Flash Gordon
 

I also do not use Face Book. You can post pics here.

Ed S

On 11/9/2019 2:59 PM, Bill in OKC too via Groups.Io wrote:
Problem with that is that some of us will not use FB for reasons that seem good to us. Like me. I flatly won't use it for anything.

Bill in OKC
On Saturday, November 9, 2019, 1:30:57 PM CST, Sam <i.am.sam.sam.i.am2008@...> wrote:


How do you dismantle the tailstock support on a 10k?

Rogan Creswick
 

I need to disassemble the tailstock support for my 10k to clean & repaint, and I'm not certain how to safely take it apart.

It can be adjusted to level the bed by tilting the top mount plate which hinges on a turned shaft that I *think* is pressed in.  I'm assuming it is a slightly tapered shaft, but I'm having a hard time verifying that because both the ends of the shaft and the edges of the holes it goes in are chamfered.

Does anyone know how these go together? (and come apart?)

Thanks!
Rogan

Re: For Sale and Wanted items

Nitro
 

Count me in.
I'm always looking for stuff and have stuff I want to move along.
Fleabay is cool, but the shipping,fees and now collected sales tax is making stuff expensive

Re: For Sale and Wanted items

Bill in OKC too
 

Problem with that is that some of us will not use FB for reasons that seem good to us. Like me. I flatly won't use it for anything.

Bill in OKC

On Saturday, November 9, 2019, 1:30:57 PM CST, Sam <i.am.sam.sam.i.am2008@...> wrote:


Re: For Sale Wanted Link

George Wietor
 

Need this. Plus, our local outdoor summer flea market here in Grand Rapids just closed. Permanently.

On Nov 9, 2019, at 10:33 AM, Caroline Willow <willowtreeusa@...> wrote:

Great idea count me in.
Bob W

Re: For Sale and Wanted items

Sam
 

Re: For Sale Wanted Link

Caroline Willow
 

Great idea count me in.
Bob W

Re: Dropped my Tailstock - mystery piece came out

Carl Bukowsky
 

My guess based on the shape, it was inside the taper of the quill, shortening the length of the taper.  So that when the tailstock quill fully retracts the tool inserted in the quill will release. 

Sent by my iPhone

On Nov 9, 2019, at 5:30 AM, Des via Groups.Io <desbromilow@...> wrote:

Feel like an idiot, was moving the tailstock of a SB13B holding it by the rear handle and the barrel/chuck when the chuck taper suddenly released and it all hit the floor.
I know pieces went on the floor, and I found some. A corner of the clamping pad was broken off, and a mystery piece was found on the floor. It doesn't appear in any of the parts lists or videos I've looked at.
Basically it's brass or bronze, about 5/8" diameter, about the same length, and a small shallow dimple in one end. There was a small piece of curved felt nearby.
Anyone know where it came from?

Thanks,<SB13_TS_mysteryLR.jpg>

FWIW, I know there is still another piece of something hiding in the shed, I heard it ping away under the bench, but everything appears to be present and working, so I will go over it with a fine tooth comb, but this piece has me confused.

Des in Oz

Dropped my Tailstock - mystery piece came out

Des
 

Feel like an idiot, was moving the tailstock of a SB13B holding it by the rear handle and the barrel/chuck when the chuck taper suddenly released and it all hit the floor.
I know pieces went on the floor, and I found some. A corner of the clamping pad was broken off, and a mystery piece was found on the floor. It doesn't appear in any of the parts lists or videos I've looked at.
Basically it's brass or bronze, about 5/8" diameter, about the same length, and a small shallow dimple in one end. There was a small piece of curved felt nearby.
Anyone know where it came from?

Thanks,

FWIW, I know there is still another piece of something hiding in the shed, I heard it ping away under the bench, but everything appears to be present and working, so I will go over it with a fine tooth comb, but this piece has me confused.

Des in Oz

Re: For Sale and Wanted items

Bill in OKC too
 

I agree with Animal on the zip or postal code for both seller and buyer. Some things I wouldn't want to pay for shipping from the UK, for example, like an 8' lathe bed...

Though I'd sure like to have one! ;)

Bill in OKC

On Friday, November 8, 2019, 8:35:55 PM CST, mike allen <animal@...> wrote:


    thats a great idea , ya may think bout havin the seller , or WTB person put his Zip code or postal code in the title , would be nice to know at the start where the part or need is

    YMMV

        animal

On 11/8/2019 11:43 AM, George Meinschein wrote:
Group,
What do you all think about having a spot to post For Sale or Wanted ads for group members?  I think I can set that up within the group if there's any interest. 

Thanks,
George H. Meinschein, P.E.

Meinschein Engineering Consultants, LLC
150 Brittany Drive
Freehold, NJ 07728-1500

Email: george.meinschein@...
Direct Dial: 732-409-0778
Cell: 732-580-1736
Fax: 732-358-0369
www.meinscheinengineering.com

   

Re: For Sale and Wanted items

mike allen
 

    thats a great idea , ya may think bout havin the seller , or WTB person put his Zip code or postal code in the title , would be nice to know at the start where the part or need is

    YMMV

        animal

On 11/8/2019 11:43 AM, George Meinschein wrote:
Group,
What do you all think about having a spot to post For Sale or Wanted ads for group members?  I think I can set that up within the group if there's any interest. 

Thanks,
George H. Meinschein, P.E.

Meinschein Engineering Consultants, LLC
150 Brittany Drive
Freehold, NJ 07728-1500

Email: george.meinschein@...
Direct Dial: 732-409-0778
Cell: 732-580-1736
Fax: 732-358-0369
www.meinscheinengineering.com

   

Re: For Sale and Wanted items

Brian Geffre
 

Agreed. 

In Christ, Brian Geffre

On Nov 8, 2019, at 16:11, Guenther Paul via Groups.Io <paulguenter@...> wrote:


Sounds good Herr Meinschein

GP


On Friday, November 8, 2019, 4:58:13 PM EST, Roger Bickers via Groups.Io <mr.concrete1964@...> wrote:


Now more so than ever I'll say yes also, and while I'm at it, if theres anyway to avoid using PayPal for payment would be great too, especially since theyve gone mad with what they now charge in fees. Roger "That"


On Fri, Nov 8, 2019 at 2:43 PM, George Meinschein
<bustedguns@...> wrote:
Group,
What do you all think about having a spot to post For Sale or Wanted ads for group members?  I think I can set that up within the group if there's any interest. 

Thanks,
George H. Meinschein, P.E.

Meinschein Engineering Consultants, LLC
150 Brittany Drive
Freehold, NJ 07728-1500

Email: george.meinschein@...
Direct Dial: 732-409-0778
Cell: 732-580-1736
Fax: 732-358-0369
www.meinscheinengineering.com

   
Confidentiality Notice: This e-mail message and any attachments are for the sole use of the intended recipient and may contain confidential and privileged information. Any unauthorized review, use, disclosure, distribution or copying is prohibited. If you are not the intended recipient, please contact the sender by replying to this e-mail and destroy/delete all copies of this e-mail message.

Re: For Sale and Wanted items

John Losch
 

George, and all,

I think a “Market place” would be useful and helpful to both buyers and sellers.  What would be very valuable is a section revealing what “it” sold for.  Not only would this feature keep prices in the real world, but perhaps more would sell if they had some idea of what their surplus was worth.  

John Losch




On Nov 8, 2019, at 2:43 PM, George Meinschein <bustedguns@...> wrote:

Group,
What do you all think about having a spot to post For Sale or Wanted ads for group members?  I think I can set that up within the group if there's any interest. 

Thanks,
George H. Meinschein, P.E.

Meinschein Engineering Consultants, LLC
150 Brittany Drive
Freehold, NJ 07728-1500

Email: george.meinschein@...
Direct Dial: 732-409-0778
Cell: 732-580-1736
Fax: 732-358-0369
www.meinscheinengineering.com

   

Re: For Sale and Wanted items

Guenther Paul
 

Sounds good Herr Meinschein

GP


On Friday, November 8, 2019, 4:58:13 PM EST, Roger Bickers via Groups.Io <mr.concrete1964@...> wrote:


Now more so than ever I'll say yes also, and while I'm at it, if theres anyway to avoid using PayPal for payment would be great too, especially since theyve gone mad with what they now charge in fees. Roger "That"


On Fri, Nov 8, 2019 at 2:43 PM, George Meinschein
<bustedguns@...> wrote:
Group,
What do you all think about having a spot to post For Sale or Wanted ads for group members?  I think I can set that up within the group if there's any interest. 

Thanks,
George H. Meinschein, P.E.

Meinschein Engineering Consultants, LLC
150 Brittany Drive
Freehold, NJ 07728-1500

Email: george.meinschein@...
Direct Dial: 732-409-0778
Cell: 732-580-1736
Fax: 732-358-0369
www.meinscheinengineering.com

   

Re: For Sale and Wanted items

b roberts
 

Yes, a good idea.
Perhaps a mention of the country where the kit is situated would be helpful.

Regards,

Brian in south Wales, UK

Re: For Sale and Wanted items

Roger Bickers
 

Now more so than ever I'll say yes also, and while I'm at it, if theres anyway to avoid using PayPal for payment would be great too, especially since theyve gone mad with what they now charge in fees. Roger "That"


On Fri, Nov 8, 2019 at 2:43 PM, George Meinschein
<bustedguns@...> wrote:
Group,
What do you all think about having a spot to post For Sale or Wanted ads for group members?  I think I can set that up within the group if there's any interest. 

Thanks,
George H. Meinschein, P.E.

Meinschein Engineering Consultants, LLC
150 Brittany Drive
Freehold, NJ 07728-1500

Email: george.meinschein@...
Direct Dial: 732-409-0778
Cell: 732-580-1736
Fax: 732-358-0369
www.meinscheinengineering.com

   

Re: For Sale and Wanted items

Nfwood
 

Yes, thank you!
Nelson


-----Original Message-----
From: Steven H via Groups.Io <stevesmachining@...>
To: SouthBendLathe <SouthBendLathe@groups.io>
Sent: Fri, Nov 8, 2019 4:09 pm
Subject: Re: [SouthBendLathe] For Sale and Wanted items

Sounds good.

Steve Haskell

On Nov 8, 2019, at 2:43 PM, George Meinschein <bustedguns@...> wrote:


Group,
What do you all think about having a spot to post For Sale or Wanted ads for group members?  I think I can set that up within the group if there's any interest. 

Thanks,
George H. Meinschein, P.E.

Meinschein Engineering Consultants, LLC
150 Brittany Drive
Freehold, NJ 07728-1500

Email: george.meinschein@...
Direct Dial: 732-409-0778
Cell: 732-580-1736
Fax: 732-358-0369
www.meinscheinengineering.com

   

Re: For Sale and Wanted items

Steven H
 

Sounds good.

Steve Haskell

On Nov 8, 2019, at 2:43 PM, George Meinschein <bustedguns@...> wrote:


Group,
What do you all think about having a spot to post For Sale or Wanted ads for group members?  I think I can set that up within the group if there's any interest. 

Thanks,
George H. Meinschein, P.E.

Meinschein Engineering Consultants, LLC
150 Brittany Drive
Freehold, NJ 07728-1500

Email: george.meinschein@...
Direct Dial: 732-409-0778
Cell: 732-580-1736
Fax: 732-358-0369
www.meinscheinengineering.com

   

Re: For Sale and Wanted items

Bill in OKC too
 

I think it would be a good thing.

Bill in OKC

On Friday, November 8, 2019, 01:43:36 PM CST, George Meinschein <bustedguns@...> wrote:


Group,
What do you all think about having a spot to post For Sale or Wanted ads for group members?  I think I can set that up within the group if there's any interest. 

Thanks,
George H. Meinschein, P.E.

Meinschein Engineering Consultants, LLC
150 Brittany Drive
Freehold, NJ 07728-1500

Email: george.meinschein@...
Direct Dial: 732-409-0778
Cell: 732-580-1736
Fax: 732-358-0369
www.meinscheinengineering.com