>What a beautiful littlecar! From the time I was a child, when a friend of my Dad had one, I wanted oneof those. Now that I am old enough to afford one, I can't get in and out ofthem anymore, because

What a beautiful little car! From the time I was a child, when a friend of my Dad had one, I wanted one of those. Now that I am old enough to afford one, I can't get in and out of them anymore,

I said pressure washer, it was a steam cleaner. Jim B Sent from my DROID RAZR MAXX

>Jim B, >What is in that big tank behind the car frame on the two wheeler. That was an LNG tank. I had rented a pressure washer to clean up theframe and engine. BTW that picture was when I lived

Jim B, What is in that big tank behind the car frame on the two wheeler. First I thought it was acetylene, but it looks like a liquid hose attached. The Morris Garage looks great. When you get it

Truly a labor of love and looking great! Good luck with the restart! M

>But, but....I wanna seethe CAR! :-) >ChesterBishop The car is in an on going state ofrestoration. It has been for 45 years. In the past few months I have not been tooactive for some medical

Hi Alec The locating pin does not have to be a precision fit in the bed and the headstock. It's purpose is simply to keep the headstock in alignment with the gears on the banjo

But, but....I wanna see the CAR! :-)

It is a #12. We need to know if your spindle uses Cast Iron or Bronze bearings, but there are shims setting the fit of the spindle. Look in the files section for the procedure. Jim B Sent from my

Mine are both 12-24 on a 1945 9A For spindle bearing adjustments, here is a good video: https://www.youtube.com/watch?v=oS0DQusUR0w

I acquired a SB9a lathe in pieces and trying to get it back together to begin learning basic machining (I'm brand new at it). The handles were off the crossfeed and compound shafts and as a result

Thank you Nelson Jim B Sent from my DROID RAZR MAXX

Jim Very nice work, it makes all the difference in the world to make compared to buy someones knock-off. Yours will go more than a couple of life times. A turret set up with the right tooling would

This is my first project in a long time. I hope the text and links areOK. Flckr is giving me grief. I think I will go back to Photobucket. MG TD SIDE CURTAIN DOOR SOCKETS. On the TD doors

Thank You Very Much. Alec Ryals

The Lord is a strong hold in the Day of trouble, and he knoweth them that trust in him )(

I recently added a south bend 13" lathe to my way to many lathes.A 1926 south bend 22XB second op lathe,1929 80 series south bend with overhead drive and taper,1922 11" with Qcgb,1928 south bend

No step. Snug in the bed, loose in the head. Ted

What pin? I have never disassembled a heavy 10.... but my 9" and my 9" "wide" ...which has a heavy 10 bed does not have a locating pin. The head stock slides on the ways and can be bolted down