I don't know, because I can't find the top slide or the parts it mounts to at the moment, but I have a vintage 1941 Heavy 10L here in pieces for a slow-going restoration. I shredded my workshop again

Hello, Having seen a South Bend milling slide for a "Heavy Ten" advertised, I wonder if anyone knows if the location hole for the top slide would be the same diameter as that of my SB model "R"

That looks really nice! Bill in OKC William R. Meyers, MSgt, USAF(Ret.) A human being should be able to change a diaper, plan an invasion, butcher a hog, conn a ship, design a building, write a

That looks great!!

Nice. John

I wanted to share a project I’ve been working on the last couple of nights. I’m preparing to machine a faceplate and thought it would be a good excuse to make a boring bar holder for my quick

If anybody is interested, I have a complete set of 6K colletwe by 1/64 ths. Mostly RSB and Hardring, some duplicates and some soft. Included is a totally unused pot or step collet. If interested

It doesn’t make a big difference but do you mean 6K Collett‘s, not 3C? 40 years ago I paid $600 for my cabinet model 10K with only a few collets, and a three jaw. Everything is obscenely

Six years ago bought a very nice college shop, hardened bed SB 13" with tooling as described for the 10K, plus Bridgeport with brand new Kurt vice, Mitutoyo DRO, Yuasa rotary table, and lots of other

Ok , 50's & 60 ' s animal On 2/10/2022 5:39 PM, Rick wrote:

On Thu, Feb 10, 2022 at 08:20 PM, mike allen wrote: Remember folks , this 10 K for sale isn't one of the typical 10 k's . This one is from the 1980's . not the 30's , 40's like so many we see are

Remember folks , this 10 K for sale isn't one of the typical 10 k's . This one is from the 1980's . not the 30's , 40's like so many we see are from . animal On 2/10/2022

Thank you all for your input. My parents were hoarders, my dads parents were hoarders, my moms parents ditto, and I’m looking around our place and contemplating what of all the stuff here (after

I payed 2k for 1980s Southbend under mount made in Korea 10k model c came with steady rest metric transposing gears aftermarket tail stock Turret with full attachments (from travelers) 6k hand collet

I’m going to weigh in here as I have a 1975 10K. I bought it two years ago from the original owner. It has scraping marks all along the bed. Came on a massively built custom built wood

I would say that that sounds like a lot for a 10k. Let’s not overdo things here. It’s a nice lightweight lathe, but limited. Even all that tooling isn’t really worth much when bought with the

I looked at it. I still say wildly overpriced for my area. I bought a Toolroom 9A with 4’ bed about 7 years ago, collets, taper attachment, yada yada, no milling attachment for $450. I even got the

Well, look at his description of what it comes with. I can see all day naked 10k lathes for about 2k. The taper attachment fluctuates wildly in price from as low as 500 to more than 1000 and so forth.

Do all bear in mind that if the taper turning attachment and collets are original to the lathe, it is classed as a toolroom model. Eddie

$5000 for a 10K? I'm thinking more like $2000 around here on Long Island. When I was looking for a SB13 about 2 years ago, I looked at a mint condition, late model Heavy 10, came with everything one