Date   

Re: Cast Iron Legs

Bill in OKC too
 

https://bearingarms.com/camedwards/2022/01/26/atf-raids-amish-farmer-seizes-guns-n54826

Article names names, and I don't know who is who, but the guns were in an upstairs room of the foundry building according to the article. I do hope you're right.

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


Aphorisms to live by:
SEMPER GUMBY!
Improvise, Adapt, and Overcome.
Physics doesn't care about your schedule.
The only reason I know anything is because I've done it wrong enough times to START to know better



On Saturday, April 23, 2022, 07:49:47 AM CDT, Andrei <calciu1@...> wrote:


No. It was the owner's brother. He was selling long guns to his amish fellows. The foundry is just fine. 


From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of Bill in OKC too via groups.io <wmrmeyers@...>
Sent: Saturday, April 23, 2022 8:48:01 AM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: Re: [SouthBendLathe] Cast Iron Legs
 
I'm not sure they're still in business. The owner ran afoul of the AFT for selling firearms without an FFL. Though I hope I'm wrong.

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


Aphorisms to live by:
SEMPER GUMBY!
Improvise, Adapt, and Overcome.
Physics doesn't care about your schedule.
The only reason I know anything is because I've done it wrong enough times to START to know better



On Saturday, April 23, 2022, 07:09:18 AM CDT, Andrei <calciu1@...> wrote:


You should consider calling Cattail Foundry in Gordonville PA. They will pour anything cast-iron for you, except canons. They are Amish, so no internet, just good old fashion letters and sometimes they even answer the phone, but they do great work.


From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of MnM3 <mhelseth@...>
Sent: Friday, April 22, 2022 9:18:09 PM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: Re: [SouthBendLathe] Cast Iron Legs
 
Hi guys,

That'd be me looking for a set of cast iron legs.  I've been looking for a long time.  
I've seen the Grizzley legs, but as others mentioned; expensive! 
The legs for the older SBs have a very unique and narrow top mounting plate of 6"x6".  None of the third-party examples I've seen have that kind of mounting plate.  Luckily, I have another 11" lathe to measure, and was able to create a set of drawings for a local shop to fabricate a set of legs out of 1/2" steel plate.  I sent them the drawings.  Still waiting on a price.  I'm sure they won't be cheap...but I want to try and match the SB legs if I can.  
If the price is out of sight; plan B is to look at making a replica of the SB wood bench.  The SB bench appears doable and it won't need to be very big as my lathe is a 11x3 with the integral splash pan.  Fingers crossed on the fabrication price.


Re: Cast Iron Legs

Andrei
 

No. It was the owner's brother. He was selling long guns to his amish fellows. The foundry is just fine. 


From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of Bill in OKC too via groups.io <wmrmeyers@...>
Sent: Saturday, April 23, 2022 8:48:01 AM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: Re: [SouthBendLathe] Cast Iron Legs
 
I'm not sure they're still in business. The owner ran afoul of the AFT for selling firearms without an FFL. Though I hope I'm wrong.

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


Aphorisms to live by:
SEMPER GUMBY!
Improvise, Adapt, and Overcome.
Physics doesn't care about your schedule.
The only reason I know anything is because I've done it wrong enough times to START to know better



On Saturday, April 23, 2022, 07:09:18 AM CDT, Andrei <calciu1@...> wrote:


You should consider calling Cattail Foundry in Gordonville PA. They will pour anything cast-iron for you, except canons. They are Amish, so no internet, just good old fashion letters and sometimes they even answer the phone, but they do great work.


From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of MnM3 <mhelseth@...>
Sent: Friday, April 22, 2022 9:18:09 PM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: Re: [SouthBendLathe] Cast Iron Legs
 
Hi guys,

That'd be me looking for a set of cast iron legs.  I've been looking for a long time.  
I've seen the Grizzley legs, but as others mentioned; expensive! 
The legs for the older SBs have a very unique and narrow top mounting plate of 6"x6".  None of the third-party examples I've seen have that kind of mounting plate.  Luckily, I have another 11" lathe to measure, and was able to create a set of drawings for a local shop to fabricate a set of legs out of 1/2" steel plate.  I sent them the drawings.  Still waiting on a price.  I'm sure they won't be cheap...but I want to try and match the SB legs if I can.  
If the price is out of sight; plan B is to look at making a replica of the SB wood bench.  The SB bench appears doable and it won't need to be very big as my lathe is a 11x3 with the integral splash pan.  Fingers crossed on the fabrication price.


Re: Cast Iron Legs

Bill in OKC too
 

I'm not sure they're still in business. The owner ran afoul of the AFT for selling firearms without an FFL. Though I hope I'm wrong.

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


Aphorisms to live by:
SEMPER GUMBY!
Improvise, Adapt, and Overcome.
Physics doesn't care about your schedule.
The only reason I know anything is because I've done it wrong enough times to START to know better



On Saturday, April 23, 2022, 07:09:18 AM CDT, Andrei <calciu1@...> wrote:


You should consider calling Cattail Foundry in Gordonville PA. They will pour anything cast-iron for you, except canons. They are Amish, so no internet, just good old fashion letters and sometimes they even answer the phone, but they do great work.


From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of MnM3 <mhelseth@...>
Sent: Friday, April 22, 2022 9:18:09 PM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: Re: [SouthBendLathe] Cast Iron Legs
 
Hi guys,

That'd be me looking for a set of cast iron legs.  I've been looking for a long time.  
I've seen the Grizzley legs, but as others mentioned; expensive! 
The legs for the older SBs have a very unique and narrow top mounting plate of 6"x6".  None of the third-party examples I've seen have that kind of mounting plate.  Luckily, I have another 11" lathe to measure, and was able to create a set of drawings for a local shop to fabricate a set of legs out of 1/2" steel plate.  I sent them the drawings.  Still waiting on a price.  I'm sure they won't be cheap...but I want to try and match the SB legs if I can.  
If the price is out of sight; plan B is to look at making a replica of the SB wood bench.  The SB bench appears doable and it won't need to be very big as my lathe is a 11x3 with the integral splash pan.  Fingers crossed on the fabrication price.


Re: Cast Iron Legs

Andrei
 

You should consider calling Cattail Foundry in Gordonville PA. They will pour anything cast-iron for you, except canons. They are Amish, so no internet, just good old fashion letters and sometimes they even answer the phone, but they do great work.


From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of MnM3 <mhelseth@...>
Sent: Friday, April 22, 2022 9:18:09 PM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: Re: [SouthBendLathe] Cast Iron Legs
 
Hi guys,

That'd be me looking for a set of cast iron legs.  I've been looking for a long time.  
I've seen the Grizzley legs, but as others mentioned; expensive! 
The legs for the older SBs have a very unique and narrow top mounting plate of 6"x6".  None of the third-party examples I've seen have that kind of mounting plate.  Luckily, I have another 11" lathe to measure, and was able to create a set of drawings for a local shop to fabricate a set of legs out of 1/2" steel plate.  I sent them the drawings.  Still waiting on a price.  I'm sure they won't be cheap...but I want to try and match the SB legs if I can.  
If the price is out of sight; plan B is to look at making a replica of the SB wood bench.  The SB bench appears doable and it won't need to be very big as my lathe is a 11x3 with the integral splash pan.  Fingers crossed on the fabrication price.


Re: Cast Iron Legs

Bill in OKC too
 

The new Heavy 10 really isn't. And there are several vendors selling 10x22 lathes about the same size for half or less than Grizzly wants for their machine with the name on it. Including Grizzly, IIRC. They also do not have the accessories that were standard on the old Heavy 10L. No collet closers, no taper attachment, just for starters.

I looked at them real hard, and over a decade, and couldn't convince myself to buy one. The real thing was available in decent shape on Ebay for about $2500-$3500, and most with all the goodies. I got mine in need of substantial restoration for under a grand. It's a long way from finished, but I'm sure it will be a much better lathe even though it only has the single-tumbler gearbox. And a spare, and two 5-C collet closers, a taper attachment, and both regular and turret tailstocks. It is going to be a lot of work, but I'll know the thing forwards and backwards by the time I'm done.

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


Aphorisms to live by:
SEMPER GUMBY!
Improvise, Adapt, and Overcome.
Physics doesn't care about your schedule.
The only reason I know anything is because I've done it wrong enough times to START to know better


On Friday, April 22, 2022, 05:23:52 PM CDT, Ondrej Krejci via groups.io <okrejci@...> wrote:


The new Heavy Ten is still cheaper than the last dinosaur SB lathe offered by LeBlond Makino at $15K, which no one was buying anyway.  Belt drive metal lathes are mostly a thing of the past.

On Friday, April 22, 2022, 04:48:10 PM EDT, Jack Reynolds <jackandladyreynolds@...> wrote:


I went and looked at the SB/Grizzly website to see these and I agree about the crazy price.  But when I perused more of the site and got curious about their version of a SB Heavy Ten I was aghast!  They boast about what a hodge podge of parts they are made of from around the world and then show a price that blows you away!  They are also out of stock on most of them.  It is a far cry from when SB used to boast that all orders were filled from stock and the black and white pictures of row upon row of beds, heads, etc ready to be assembled and shipped.

Jack

On 4/22/2022 11:26 AM, William Nelson wrote:
I'm with you Debbie Downer that price is crazy high. But remember you get thr brass Southbend name plates to make it official so I'm pretty sure that raises the price a tad.
--
Bill From Socal


Re: Cast Iron Legs

Jack Reynolds
 

Ondrej,

You are probably quite right on both counts.  Unfortunately not only are belt drive lathes mostly a thing of the past but manually operated lathes are not far behind as are people who know how to use them properly.  I have a 1959 SB Heavy 10 and a 10 inch Logan, both of which combined could not even begin to match the cost of that new Heavy 10 which does not even come with a base.  Nevertheless, I would not trade either of them for that new "Heavy 10".

Jack

On 4/22/2022 6:22 PM, Ondrej Krejci via groups.io wrote:

The new Heavy Ten is still cheaper than the last dinosaur SB lathe offered by LeBlond Makino at $15K, which no one was buying anyway.  Belt drive metal lathes are mostly a thing of the past.

On Friday, April 22, 2022, 04:48:10 PM EDT, Jack Reynolds <jackandladyreynolds@...> wrote:


I went and looked at the SB/Grizzly website to see these and I agree about the crazy price.  But when I perused more of the site and got curious about their version of a SB Heavy Ten I was aghast!  They boast about what a hodge podge of parts they are made of from around the world and then show a price that blows you away!  They are also out of stock on most of them.  It is a far cry from when SB used to boast that all orders were filled from stock and the black and white pictures of row upon row of beds, heads, etc ready to be assembled and shipped.

Jack


Re: Cast Iron Legs

MnM3
 

Hi guys,

That'd be me looking for a set of cast iron legs.  I've been looking for a long time.  
I've seen the Grizzley legs, but as others mentioned; expensive! 
The legs for the older SBs have a very unique and narrow top mounting plate of 6"x6".  None of the third-party examples I've seen have that kind of mounting plate.  Luckily, I have another 11" lathe to measure, and was able to create a set of drawings for a local shop to fabricate a set of legs out of 1/2" steel plate.  I sent them the drawings.  Still waiting on a price.  I'm sure they won't be cheap...but I want to try and match the SB legs if I can.  
If the price is out of sight; plan B is to look at making a replica of the SB wood bench.  The SB bench appears doable and it won't need to be very big as my lathe is a 11x3 with the integral splash pan.  Fingers crossed on the fabrication price.


Re: Cast Iron Legs

Ondrej Krejci <okrejci@...>
 

The new Heavy Ten is still cheaper than the last dinosaur SB lathe offered by LeBlond Makino at $15K, which no one was buying anyway.  Belt drive metal lathes are mostly a thing of the past.

On Friday, April 22, 2022, 04:48:10 PM EDT, Jack Reynolds <jackandladyreynolds@...> wrote:


I went and looked at the SB/Grizzly website to see these and I agree about the crazy price.  But when I perused more of the site and got curious about their version of a SB Heavy Ten I was aghast!  They boast about what a hodge podge of parts they are made of from around the world and then show a price that blows you away!  They are also out of stock on most of them.  It is a far cry from when SB used to boast that all orders were filled from stock and the black and white pictures of row upon row of beds, heads, etc ready to be assembled and shipped.

Jack

On 4/22/2022 11:26 AM, William Nelson wrote:
I'm with you Debbie Downer that price is crazy high. But remember you get thr brass Southbend name plates to make it official so I'm pretty sure that raises the price a tad.
--
Bill From Socal


Re: South Bend 9" lathe for sale

Ron Pare
 

I’m in Salem, MA

 

From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> On Behalf Of houdini via groups.io
Sent: Friday, April 22, 2022 4:50 PM
To: SouthBendLathe@groups.io
Subject: Re: [SouthBendLathe] South Bend 9" lathe for sale

 

Ron i'm interested where are you?

 

 

Paul     houdini969@...

 

On Thursday, April 21, 2022, 03:47:53 PM EDT, Ron Pare <rppare@...> wrote:

 

 

 

 

Model A, South Bend  lathe, Precision  9” --  644-Y,  3ft.

3 and 4 jaw chucks, 2-3 face plates, several different types of tool holders, change gear set for metric thread cutting(I think). And a pile of ½ inch, 3/8 inch tool bit blanks and quite a few manufactured carbide profiles.

And many other parts and bits associated with the 9” SB., includes several gallons of oil, for the lathe spindle, way, cutting.

For Sale.  No room, No time.   $1100.00  

PM me if interested.  or anirwin43@...

Thanks


Re: South Bend 9" lathe for sale

houdini
 

Ron i'm interested where are you?


Paul     houdini969@...

On Thursday, April 21, 2022, 03:47:53 PM EDT, Ron Pare <rppare@...> wrote:


 

 

Model A, South Bend  lathe, Precision  9” --  644-Y,  3ft.

3 and 4 jaw chucks, 2-3 face plates, several different types of tool holders, change gear set for metric thread cutting(I think). And a pile of ½ inch, 3/8 inch tool bit blanks and quite a few manufactured carbide profiles.

And many other parts and bits associated with the 9” SB., includes several gallons of oil, for the lathe spindle, way, cutting.

For Sale.  No room, No time.   $1100.00  

PM me if interested.  or anirwin43@...

Thanks


Re: Cast Iron Legs

Jack Reynolds
 

I went and looked at the SB/Grizzly website to see these and I agree about the crazy price.  But when I perused more of the site and got curious about their version of a SB Heavy Ten I was aghast!  They boast about what a hodge podge of parts they are made of from around the world and then show a price that blows you away!  They are also out of stock on most of them.  It is a far cry from when SB used to boast that all orders were filled from stock and the black and white pictures of row upon row of beds, heads, etc ready to be assembled and shipped.

Jack

On 4/22/2022 11:26 AM, William Nelson wrote:

I'm with you Debbie Downer that price is crazy high. But remember you get thr brass Southbend name plates to make it official so I'm pretty sure that raises the price a tad.
--
Bill From Socal


Re: 14-1/2 spindle nose and taper

Jim_B
 

SB tended to use proprietary tapers in their spindles.
Each lathe was shipped with an adapter to a standard MT. 
Your adapter would have been a MT-3

The taper dimensions can be fund in the files section on the SB tooling dimensions  form 
I have attached a copy. The row that indicates its MT-3 is with the adapter. 
These sometimes show up on ebay.  There should be past discussions on other sources. 



Jim B.

Dr. James A Benjamin
1629 Riverview Drive. Apt 416
Deerfield Beach, FL 33441



On Apr 22, 2022, at 12:29 PM, Rangelov <rangelov@...> wrote:

Hi,
I have a 14-1/2 inch SB lathe with the uncommon 2-1/4 x 6 TPI spindle.  This has a small diameter internal bore.  Too small for 5C collets.

I want to use a headstock center for turning between centers.  I cannot determine what I need to fit a center.  A Morse taper #3 is too small. I think a MT #4 is too large (it has been a very long time since I tried it).

The tailstock is MT #3.

The spindle has an approximate 1-5/16 gauge line.  I tried a center adapter from a friend, but it only went in about a 1/2 inch.  Other adapters didn't fit at all.

I looked at the SB spindle information sheet, but no help there.

Does anyone know what I have or should have? Or what is exactly neeed.

I know that I can chuck up a rod and turn it into a center.  But, I would like to get a center or proper adapter to fit my spindle.

Thanks, Dimitar


--
Jim B


14-1/2 spindle nose and taper

Rangelov
 

Hi,
I have a 14-1/2 inch SB lathe with the uncommon 2-1/4 x 6 TPI spindle.  This has a small diameter internal bore.  Too small for 5C collets.

I want to use a headstock center for turning between centers.  I cannot determine what I need to fit a center.  A Morse taper #3 is too small. I think a MT #4 is too large (it has been a very long time since I tried it).

The tailstock is MT #3.

The spindle has an approximate 1-5/16 gauge line.  I tried a center adapter from a friend, but it only went in about a 1/2 inch.  Other adapters didn't fit at all.

I looked at the SB spindle information sheet, but no help there.

Does anyone know what I have or should have? Or what is exactly neeed.

I know that I can chuck up a rod and turn it into a center.  But, I would like to get a center or proper adapter to fit my spindle.

Thanks, Dimitar


Re: Cast Iron Legs

William Nelson
 

I'm with you Debbie Downer that price is crazy high. But remember you get thr brass Southbend name plates to make it official so I'm pretty sure that raises the price a tad.
--
Bill From Socal


Re: Cast Iron Legs

Bill in OKC too
 

That does not include the wooden top or shelf. Those are an additional $273 each. Plus shipping. Lots of shipping. $179 for the set of legs alone.

Bill in OKC <----- can't help being a downer sometimes. Sorry about that!

William R. Meyers, MSgt, USAF(Ret.)


Aphorisms to live by:
SEMPER GUMBY!
Improvise, Adapt, and Overcome.
Physics doesn't care about your schedule.
The only reason I know anything is because I've done it wrong enough times to START to know better



On Thursday, April 21, 2022, 02:15:57 PM CDT, Andrei <calciu1@...> wrote:


That looks like a pretty good deal, with both tops. I bet it weight 120 pouns like nothing. I want to see my mailman hauling that to the door. 

From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of Ondrej Krejci via groups.io <okrejci@...>
Sent: Thursday, April 21, 2022 3:12 PM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: Re: [SouthBendLathe] Cast Iron Legs
 
On Thursday, April 21, 2022, 12:53:47 PM EDT, Andrei <calciu1@...> wrote:


Remember that any advertising is generic. Once you establish contact with the seller, they will send you a list of 40-50 styles they manufacture and the respective prices. Then you pick what you want. Kinda like Amazon advertising sunglasses in an ad and when you go to the shopping catalog site they have 3,800 designs to pick from. 

From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of William Nelson <wnnelson@...>
Sent: Thursday, April 21, 2022 12:16 PM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: Re: [SouthBendLathe] Cast Iron Legs
 
Ok is this a crap shoot as to what style legs you get? I see a different leg style in the video vs. the still pictures. Probably get something completely different when you receive it. Is 28.5" tall enough seems short to me.
--
Bill From Socal


Re: South Bend 9" lathe for sale

Andrei
 

Ron, you forgot the location. 

From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of Ron Pare <rppare@...>
Sent: Thursday, April 21, 2022 3:47 PM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: [SouthBendLathe] South Bend 9" lathe for sale
 

 

 

Model A, South Bend  lathe, Precision  9” --  644-Y,  3ft.

3 and 4 jaw chucks, 2-3 face plates, several different types of tool holders, change gear set for metric thread cutting(I think). And a pile of ½ inch, 3/8 inch tool bit blanks and quite a few manufactured carbide profiles.

And many other parts and bits associated with the 9” SB., includes several gallons of oil, for the lathe spindle, way, cutting.

For Sale.  No room, No time.   $1100.00  

PM me if interested.  or anirwin43@...

Thanks


South Bend 9" lathe for sale

Ron Pare
 

 

 

Model A, South Bend  lathe, Precision  9” --  644-Y,  3ft.

3 and 4 jaw chucks, 2-3 face plates, several different types of tool holders, change gear set for metric thread cutting(I think). And a pile of ½ inch, 3/8 inch tool bit blanks and quite a few manufactured carbide profiles.

And many other parts and bits associated with the 9” SB., includes several gallons of oil, for the lathe spindle, way, cutting.

For Sale.  No room, No time.   $1100.00  

PM me if interested.  or anirwin43@...

Thanks


Re: Cast Iron Legs

Andrei
 

I just read the details. No benchtop included. In that case, 700 bucks for the pair of legs ain't worth it. 

From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of Andrei <calciu1@...>
Sent: Thursday, April 21, 2022 3:15 PM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: Re: [SouthBendLathe] Cast Iron Legs
 
That looks like a pretty good deal, with both tops. I bet it weight 120 pouns like nothing. I want to see my mailman hauling that to the door. 

From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of Ondrej Krejci via groups.io <okrejci@...>
Sent: Thursday, April 21, 2022 3:12 PM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: Re: [SouthBendLathe] Cast Iron Legs
 
On Thursday, April 21, 2022, 12:53:47 PM EDT, Andrei <calciu1@...> wrote:


Remember that any advertising is generic. Once you establish contact with the seller, they will send you a list of 40-50 styles they manufacture and the respective prices. Then you pick what you want. Kinda like Amazon advertising sunglasses in an ad and when you go to the shopping catalog site they have 3,800 designs to pick from. 

From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of William Nelson <wnnelson@...>
Sent: Thursday, April 21, 2022 12:16 PM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: Re: [SouthBendLathe] Cast Iron Legs
 
Ok is this a crap shoot as to what style legs you get? I see a different leg style in the video vs. the still pictures. Probably get something completely different when you receive it. Is 28.5" tall enough seems short to me.
--
Bill From Socal


Re: Cast Iron Legs

Andrei
 

That looks like a pretty good deal, with both tops. I bet it weight 120 pouns like nothing. I want to see my mailman hauling that to the door. 

From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of Ondrej Krejci via groups.io <okrejci@...>
Sent: Thursday, April 21, 2022 3:12 PM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: Re: [SouthBendLathe] Cast Iron Legs
 
On Thursday, April 21, 2022, 12:53:47 PM EDT, Andrei <calciu1@...> wrote:


Remember that any advertising is generic. Once you establish contact with the seller, they will send you a list of 40-50 styles they manufacture and the respective prices. Then you pick what you want. Kinda like Amazon advertising sunglasses in an ad and when you go to the shopping catalog site they have 3,800 designs to pick from. 

From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of William Nelson <wnnelson@...>
Sent: Thursday, April 21, 2022 12:16 PM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: Re: [SouthBendLathe] Cast Iron Legs
 
Ok is this a crap shoot as to what style legs you get? I see a different leg style in the video vs. the still pictures. Probably get something completely different when you receive it. Is 28.5" tall enough seems short to me.
--
Bill From Socal


Re: Cast Iron Legs

Ondrej Krejci <okrejci@...>
 

On Thursday, April 21, 2022, 12:53:47 PM EDT, Andrei <calciu1@...> wrote:


Remember that any advertising is generic. Once you establish contact with the seller, they will send you a list of 40-50 styles they manufacture and the respective prices. Then you pick what you want. Kinda like Amazon advertising sunglasses in an ad and when you go to the shopping catalog site they have 3,800 designs to pick from. 

From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of William Nelson <wnnelson@...>
Sent: Thursday, April 21, 2022 12:16 PM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: Re: [SouthBendLathe] Cast Iron Legs
 
Ok is this a crap shoot as to what style legs you get? I see a different leg style in the video vs. the still pictures. Probably get something completely different when you receive it. Is 28.5" tall enough seems short to me.
--
Bill From Socal

701 - 720 of 106988