Date   

Re: 13" in Michigan for parts

Todd
 

Seems there are a bunch of folks needing parts from this 13".   I figured I would have the dilemma of selling it as a whole to be resurrected, or as an organ donor. 

 I think an organ donor is the best course to save many. 

 Vern, I'm sorry. I feel compelled to help keep as many of these running as possible.


Re: 13" in Michigan for parts

vern bartlett
 

Sent an email 


On Tue, Jul 21, 2020, 10:57 AM slash2nut via groups.io <lore724=aol.com@groups.io> wrote:
Vern
I think it is belvedere66@... that is listed below.

I live in Chelsea MI and was wondering if you have anything for my heavy 10.  I just got it and am looking for mt2 centers and so forth.

Thanks,
Dave

-----Original Message-----
From: vern bartlett <bartlettvern@...>
To: SouthBendLathe@groups.io
Sent: Tue, Jul 21, 2020 11:51 am
Subject: Re: [SouthBendLathe] 13" in Michigan for parts

What's your email address?

On Tue, Jul 21, 2020, 8:32 AM Todd <belvedere66@...> wrote:
Vern, message me and we can discuss.


Re: 13" in Michigan for parts

Bill in OKC too
 

MT2 centers are available on Amazon, ebay, and all the various tool places. I've bought some of them myself from Amazon and CDCO Tool, among other places. If you're actually planning on turning between centers, you might also want what's called a "half-center. One side of it is cut away to let you face a part that is held between centers. Here's an example: MT2 Carbide Tipped Half Nothced Dead Center Morse Taper 2 CNC Lathe Tool


Bottom photo in the sidebar give dimensions for this one, and you could buy or make a regular center, and then grind or mill it to be a half-center yourself. 

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)





On Tuesday, July 21, 2020, 10:57:33 AM CDT, slash2nut via groups.io <lore724@...> wrote:


Vern
I think it is belvedere66@... that is listed below.

I live in Chelsea MI and was wondering if you have anything for my heavy 10.  I just got it and am looking for mt2 centers and so forth.

Thanks,
Dave

-----Original Message-----
From: vern bartlett <bartlettvern@...>
To: SouthBendLathe@groups.io
Sent: Tue, Jul 21, 2020 11:51 am
Subject: Re: [SouthBendLathe] 13" in Michigan for parts

What's your email address?

On Tue, Jul 21, 2020, 8:32 AM Todd <belvedere66@...> wrote:
Vern, message me and we can discuss.


Re: 13" in Michigan for parts

slash2nut
 

Vern
I think it is belvedere66@... that is listed below.

I live in Chelsea MI and was wondering if you have anything for my heavy 10.  I just got it and am looking for mt2 centers and so forth.

Thanks,
Dave

-----Original Message-----
From: vern bartlett <bartlettvern@...>
To: SouthBendLathe@groups.io
Sent: Tue, Jul 21, 2020 11:51 am
Subject: Re: [SouthBendLathe] 13" in Michigan for parts

What's your email address?

On Tue, Jul 21, 2020, 8:32 AM Todd <belvedere66@...> wrote:
Vern, message me and we can discuss.


Re: 13" in Michigan for parts

vern bartlett
 

What's your email address?


On Tue, Jul 21, 2020, 8:32 AM Todd <belvedere66@...> wrote:
Vern, message me and we can discuss.


Re: 13" in Michigan for parts

Todd
 

It does.

Sent from my Verizon, Samsung Galaxy smartphone


From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of Ron Vial <goldendreamtattoo@...>
Sent: Tuesday, July 21, 2020 11:31:59 AM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: Re: [SouthBendLathe] 13" in Michigan for parts
 
Dear Sr. Would u happen to have a forward revers Handel 

On Mon, Jul 20, 2020, 12:21 PM Todd <belvedere66@...> wrote:
3rd try...

I have a 13", serial 61491 that I saved from the scrapper. Sadly it's missing the entire spindle assy and since I already have a 14.5" I'm restoring (in the background), I am offering up everything on this 13" to save others. 

  Todd 


Re: 13" in Michigan for parts

Ron Vial
 

Dear Sr. Would u happen to have a forward revers Handel 


On Mon, Jul 20, 2020, 12:21 PM Todd <belvedere66@...> wrote:
3rd try...

I have a 13", serial 61491 that I saved from the scrapper. Sadly it's missing the entire spindle assy and since I already have a 14.5" I'm restoring (in the background), I am offering up everything on this 13" to save others. 

  Todd 


reverse tumbler gears

John Gallo
 

Hi, I was just wondering if any one has tried the ball bearing reverse tumbler gears that I see on E-Bay? They make great claims about making the gear train quieter. Thanks, John


Re: 13" in Michigan for parts

Todd
 

Vern, message me and we can discuss.


Re: 13" in Michigan for parts

vern bartlett
 

Restore it for my personal use. I'm almost done with a 16"x 120 southbend. It was missing some parts also but getting there. I have to pore new babit into the countershaft bearings next so I'm learning how to do that now, lol


On Tue, Jul 21, 2020, 8:13 AM Todd <belvedere66@...> wrote:
I can't photograph what's not there :)

If you removed the 2 caps and lifted the entire spindle out, THAT'S what is missing (and the crossfeed handwheel). The rest is all there, even the belt.

 Someone has previously asked for the brass wipers if they are still there, so those may be gone.

 As for price.... ? Kinda depends on it's future. Will it be put back into service or would you just part it out for more $$

    Todd


Re: 13" in Michigan for parts

Todd
 

I can't photograph what's not there :)

If you removed the 2 caps and lifted the entire spindle out, THAT'S what is missing (and the crossfeed handwheel). The rest is all there, even the belt.

 Someone has previously asked for the brass wipers if they are still there, so those may be gone.

 As for price.... ? Kinda depends on it's future. Will it be put back into service or would you just part it out for more $$

    Todd


Re: 13" in Michigan for parts

vern bartlett
 

What would you take for the whole thing? Could you show pics o what's missing?


On Mon, Jul 20, 2020, 12:21 PM Todd <belvedere66@...> wrote:
3rd try...

I have a 13", serial 61491 that I saved from the scrapper. Sadly it's missing the entire spindle assy and since I already have a 14.5" I'm restoring (in the background), I am offering up everything on this 13" to save others. 

  Todd 


Re: 13" in Michigan for parts

Todd
 

20 miles S. of Flint off I-75 (Clarkston)


Re: 13" in Michigan for parts

George Wietor
 

Tell us where in the Mitten and I will spread the word. 
George.
Lurking in Grand Rapids.

On Jul 20, 2020, at 1:21 PM, Todd <belvedere66@...> wrote:

3rd try...

I have a 13", serial 61491 that I saved from the scrapper. Sadly it's missing the entire spindle assy and since I already have a 14.5" I'm restoring (in the background), I am offering up everything on this 13" to save others. 

  Todd 
<20200712_175729.jpg>
<20200712_175703.jpg>
<20200712_203854.jpg>


Re: WTB 5C COLLETS

ww_big_al
 

To be sure what taper you have, measure it. Put a dial indicator to measure carriage movement. If you have a second DI, put it on the compound to measure the “Y” axis movement. Set your carriage as close as you can to the largest diameter and zero them out. Move the carriage (Z Axis) 1”. Take the Y movement and calculate the taper.  May not be true valve but close enough to figure what you need.

Al

 

From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> On Behalf Of John Gallo via groups.io
Sent: Monday, July 20, 2020 9:30 PM
To: SouthBendLathe@groups.io
Subject: Re: [SouthBendLathe] WTB 5C COLLETS

 

Thanks for the tip Mike, but it looks like he is selling only metric sizes. John


Re: WTB 5C COLLETS

John Gallo
 

Thanks for the tip Mike, but it looks like he is selling only metric sizes. John


Re: WTB 5C COLLETS

mike allen
 

        theres a guy on the South Bend facebook page that has a large bunch of collets for sale

        animal

On 7/20/2020 2:05 PM, John Gallo via groups.io wrote:
Hi, 

I am looking for the following 5C collets. 1/8, 3/16, 5/8, 11/16, 13/16, 1, 1 1/16. Preferably American made, used in good shape. If any one has these for sale please let me know. Thanks, John.


WTB 5C COLLETS

John Gallo
 

Hi, 

I am looking for the following 5C collets. 1/8, 3/16, 5/8, 11/16, 13/16, 1, 1 1/16. Preferably American made, used in good shape. If any one has these for sale please let me know. Thanks, John.


13" in Michigan for parts

Todd
 

3rd try...

I have a 13", serial 61491 that I saved from the scrapper. Sadly it's missing the entire spindle assy and since I already have a 14.5" I'm restoring (in the background), I am offering up everything on this 13" to save others. 

  Todd 


Re: WANTED!

sblatheman
 

How much do you want to spend for a good used one?

Ted


On Jul 17, 2020, at 9:32 PM, s.t.m.installations@... wrote:

Hey all. Somehow I ended up with a 000S toolholder for my 9a, while L and R are 00's. Any chance anybody out there has an extra 00S? Officially tired of having to cut huge undercut on my cutters to accommodate the steeper angle caused by the holder being so much shorter than the 00. Thanks
Stan

2421 - 2440 of 105535