Date   
Re: For Sale Wanted Link

George Wietor
 

Need this. Plus, our local outdoor summer flea market here in Grand Rapids just closed. Permanently.

On Nov 9, 2019, at 10:33 AM, Caroline Willow <willowtreeusa@...> wrote:

Great idea count me in.
Bob W

Re: For Sale and Wanted items

Sam
 

Re: For Sale Wanted Link

Caroline Willow
 

Great idea count me in.
Bob W

Re: Dropped my Tailstock - mystery piece came out

Carl Bukowsky
 

My guess based on the shape, it was inside the taper of the quill, shortening the length of the taper.  So that when the tailstock quill fully retracts the tool inserted in the quill will release. 

Sent by my iPhone

On Nov 9, 2019, at 5:30 AM, Des via Groups.Io <desbromilow@...> wrote:

Feel like an idiot, was moving the tailstock of a SB13B holding it by the rear handle and the barrel/chuck when the chuck taper suddenly released and it all hit the floor.
I know pieces went on the floor, and I found some. A corner of the clamping pad was broken off, and a mystery piece was found on the floor. It doesn't appear in any of the parts lists or videos I've looked at.
Basically it's brass or bronze, about 5/8" diameter, about the same length, and a small shallow dimple in one end. There was a small piece of curved felt nearby.
Anyone know where it came from?

Thanks,<SB13_TS_mysteryLR.jpg>

FWIW, I know there is still another piece of something hiding in the shed, I heard it ping away under the bench, but everything appears to be present and working, so I will go over it with a fine tooth comb, but this piece has me confused.

Des in Oz

Dropped my Tailstock - mystery piece came out

Des
 

Feel like an idiot, was moving the tailstock of a SB13B holding it by the rear handle and the barrel/chuck when the chuck taper suddenly released and it all hit the floor.
I know pieces went on the floor, and I found some. A corner of the clamping pad was broken off, and a mystery piece was found on the floor. It doesn't appear in any of the parts lists or videos I've looked at.
Basically it's brass or bronze, about 5/8" diameter, about the same length, and a small shallow dimple in one end. There was a small piece of curved felt nearby.
Anyone know where it came from?

Thanks,

FWIW, I know there is still another piece of something hiding in the shed, I heard it ping away under the bench, but everything appears to be present and working, so I will go over it with a fine tooth comb, but this piece has me confused.

Des in Oz

Re: For Sale and Wanted items

Bill in OKC too
 

I agree with Animal on the zip or postal code for both seller and buyer. Some things I wouldn't want to pay for shipping from the UK, for example, like an 8' lathe bed...

Though I'd sure like to have one! ;)

Bill in OKC

On Friday, November 8, 2019, 8:35:55 PM CST, mike allen <animal@...> wrote:


    thats a great idea , ya may think bout havin the seller , or WTB person put his Zip code or postal code in the title , would be nice to know at the start where the part or need is

    YMMV

        animal

On 11/8/2019 11:43 AM, George Meinschein wrote:
Group,
What do you all think about having a spot to post For Sale or Wanted ads for group members?  I think I can set that up within the group if there's any interest. 

Thanks,
George H. Meinschein, P.E.

Meinschein Engineering Consultants, LLC
150 Brittany Drive
Freehold, NJ 07728-1500

Email: george.meinschein@...
Direct Dial: 732-409-0778
Cell: 732-580-1736
Fax: 732-358-0369
www.meinscheinengineering.com

   

Re: For Sale and Wanted items

mike allen
 

    thats a great idea , ya may think bout havin the seller , or WTB person put his Zip code or postal code in the title , would be nice to know at the start where the part or need is

    YMMV

        animal

On 11/8/2019 11:43 AM, George Meinschein wrote:
Group,
What do you all think about having a spot to post For Sale or Wanted ads for group members?  I think I can set that up within the group if there's any interest. 

Thanks,
George H. Meinschein, P.E.

Meinschein Engineering Consultants, LLC
150 Brittany Drive
Freehold, NJ 07728-1500

Email: george.meinschein@...
Direct Dial: 732-409-0778
Cell: 732-580-1736
Fax: 732-358-0369
www.meinscheinengineering.com

   

Re: For Sale and Wanted items

Brian Geffre
 

Agreed. 

In Christ, Brian Geffre

On Nov 8, 2019, at 16:11, Guenther Paul via Groups.Io <paulguenter@...> wrote:


Sounds good Herr Meinschein

GP


On Friday, November 8, 2019, 4:58:13 PM EST, Roger Bickers via Groups.Io <mr.concrete1964@...> wrote:


Now more so than ever I'll say yes also, and while I'm at it, if theres anyway to avoid using PayPal for payment would be great too, especially since theyve gone mad with what they now charge in fees. Roger "That"


On Fri, Nov 8, 2019 at 2:43 PM, George Meinschein
<bustedguns@...> wrote:
Group,
What do you all think about having a spot to post For Sale or Wanted ads for group members?  I think I can set that up within the group if there's any interest. 

Thanks,
George H. Meinschein, P.E.

Meinschein Engineering Consultants, LLC
150 Brittany Drive
Freehold, NJ 07728-1500

Email: george.meinschein@...
Direct Dial: 732-409-0778
Cell: 732-580-1736
Fax: 732-358-0369
www.meinscheinengineering.com

   
Confidentiality Notice: This e-mail message and any attachments are for the sole use of the intended recipient and may contain confidential and privileged information. Any unauthorized review, use, disclosure, distribution or copying is prohibited. If you are not the intended recipient, please contact the sender by replying to this e-mail and destroy/delete all copies of this e-mail message.

Re: For Sale and Wanted items

John Losch
 

George, and all,

I think a “Market place” would be useful and helpful to both buyers and sellers.  What would be very valuable is a section revealing what “it” sold for.  Not only would this feature keep prices in the real world, but perhaps more would sell if they had some idea of what their surplus was worth.  

John Losch




On Nov 8, 2019, at 2:43 PM, George Meinschein <bustedguns@...> wrote:

Group,
What do you all think about having a spot to post For Sale or Wanted ads for group members?  I think I can set that up within the group if there's any interest. 

Thanks,
George H. Meinschein, P.E.

Meinschein Engineering Consultants, LLC
150 Brittany Drive
Freehold, NJ 07728-1500

Email: george.meinschein@...
Direct Dial: 732-409-0778
Cell: 732-580-1736
Fax: 732-358-0369
www.meinscheinengineering.com

   

Re: For Sale and Wanted items

Guenther Paul
 

Sounds good Herr Meinschein

GP


On Friday, November 8, 2019, 4:58:13 PM EST, Roger Bickers via Groups.Io <mr.concrete1964@...> wrote:


Now more so than ever I'll say yes also, and while I'm at it, if theres anyway to avoid using PayPal for payment would be great too, especially since theyve gone mad with what they now charge in fees. Roger "That"


On Fri, Nov 8, 2019 at 2:43 PM, George Meinschein
<bustedguns@...> wrote:
Group,
What do you all think about having a spot to post For Sale or Wanted ads for group members?  I think I can set that up within the group if there's any interest. 

Thanks,
George H. Meinschein, P.E.

Meinschein Engineering Consultants, LLC
150 Brittany Drive
Freehold, NJ 07728-1500

Email: george.meinschein@...
Direct Dial: 732-409-0778
Cell: 732-580-1736
Fax: 732-358-0369
www.meinscheinengineering.com

   

Re: For Sale and Wanted items

b roberts
 

Yes, a good idea.
Perhaps a mention of the country where the kit is situated would be helpful.

Regards,

Brian in south Wales, UK

Re: For Sale and Wanted items

Roger Bickers
 

Now more so than ever I'll say yes also, and while I'm at it, if theres anyway to avoid using PayPal for payment would be great too, especially since theyve gone mad with what they now charge in fees. Roger "That"


On Fri, Nov 8, 2019 at 2:43 PM, George Meinschein
<bustedguns@...> wrote:
Group,
What do you all think about having a spot to post For Sale or Wanted ads for group members?  I think I can set that up within the group if there's any interest. 

Thanks,
George H. Meinschein, P.E.

Meinschein Engineering Consultants, LLC
150 Brittany Drive
Freehold, NJ 07728-1500

Email: george.meinschein@...
Direct Dial: 732-409-0778
Cell: 732-580-1736
Fax: 732-358-0369
www.meinscheinengineering.com

   

Re: For Sale and Wanted items

Nfwood
 

Yes, thank you!
Nelson


-----Original Message-----
From: Steven H via Groups.Io <stevesmachining@...>
To: SouthBendLathe <SouthBendLathe@groups.io>
Sent: Fri, Nov 8, 2019 4:09 pm
Subject: Re: [SouthBendLathe] For Sale and Wanted items

Sounds good.

Steve Haskell

On Nov 8, 2019, at 2:43 PM, George Meinschein <bustedguns@...> wrote:


Group,
What do you all think about having a spot to post For Sale or Wanted ads for group members?  I think I can set that up within the group if there's any interest. 

Thanks,
George H. Meinschein, P.E.

Meinschein Engineering Consultants, LLC
150 Brittany Drive
Freehold, NJ 07728-1500

Email: george.meinschein@...
Direct Dial: 732-409-0778
Cell: 732-580-1736
Fax: 732-358-0369
www.meinscheinengineering.com

   

Re: For Sale and Wanted items

Steven H
 

Sounds good.

Steve Haskell

On Nov 8, 2019, at 2:43 PM, George Meinschein <bustedguns@...> wrote:


Group,
What do you all think about having a spot to post For Sale or Wanted ads for group members?  I think I can set that up within the group if there's any interest. 

Thanks,
George H. Meinschein, P.E.

Meinschein Engineering Consultants, LLC
150 Brittany Drive
Freehold, NJ 07728-1500

Email: george.meinschein@...
Direct Dial: 732-409-0778
Cell: 732-580-1736
Fax: 732-358-0369
www.meinscheinengineering.com

   

Re: For Sale and Wanted items

Bill in OKC too
 

I think it would be a good thing.

Bill in OKC

On Friday, November 8, 2019, 01:43:36 PM CST, George Meinschein <bustedguns@...> wrote:


Group,
What do you all think about having a spot to post For Sale or Wanted ads for group members?  I think I can set that up within the group if there's any interest. 

Thanks,
George H. Meinschein, P.E.

Meinschein Engineering Consultants, LLC
150 Brittany Drive
Freehold, NJ 07728-1500

Email: george.meinschein@...
Direct Dial: 732-409-0778
Cell: 732-580-1736
Fax: 732-358-0369
www.meinscheinengineering.com

   

Re: For Sale and Wanted items

John Amundson
 

Fantastic idea George, I really belive it would be very benificalEmoji

On Friday, November 8, 2019, 11:43:33 AM PST, George Meinschein <bustedguns@...> wrote:


Group,
What do you all think about having a spot to post For Sale or Wanted ads for group members?  I think I can set that up within the group if there's any interest. 

Thanks,
George H. Meinschein, P.E.

Meinschein Engineering Consultants, LLC
150 Brittany Drive
Freehold, NJ 07728-1500

Email: george.meinschein@...
Direct Dial: 732-409-0778
Cell: 732-580-1736
Fax: 732-358-0369
www.meinscheinengineering.com

   

Re: 1964 10K headstock cover question

Nitro
 

Let me know what you need on my part.

For Sale and Wanted items

George Meinschein
 

Group,
What do you all think about having a spot to post For Sale or Wanted ads for group members?  I think I can set that up within the group if there's any interest. 

Thanks,
George H. Meinschein, P.E.

Meinschein Engineering Consultants, LLC
150 Brittany Drive
Freehold, NJ 07728-1500

Email: george.meinschein@...
Direct Dial: 732-409-0778
Cell: 732-580-1736
Fax: 732-358-0369
www.meinscheinengineering.com

   

Re: 1964 10K headstock cover question

Ray De Jong
 

I may have that cover, I will head to my storage this morning and take a couple pics. I also have the long fibreglass cover, both of these are no longer needed by me as I bought a under drive cabinet and converted a cover from an earlier 9" under drive. There are at least 4 versions of this small cast cover, each with minor differences which make installing on the various head stock castings difficult. Mine is a 1979 10K and the casting is very different from yours. However, the small cast cover I have available may just fit your headstock. back to you later today
Ray

On Wednesday, November 6, 2019, 9:17:22 PM PST, Nitro <nitroburners@...> wrote:




Alrighty then, I finally found an image of what I need!

Thanks to everyone for their input, and keep me in mind if you run across one.

My project will be a real honey of a lathe once I get her all nailed back together.

Re: 1964 10K headstock cover question

Nitro
 



Alrighty then, I finally found an image of what I need!

Thanks to everyone for their input, and keep me in mind if you run across one.

My project will be a real honey of a lathe once I get her all nailed back together.