1. Messages
  2. trouble between centers

Re: trouble between centers

m. allan noah
 

Half inch mild steel, 20+ inches long? Try a follower rest.

allan

On Thu, Dec 10, 2015 at 6:22 PM, johnnyblock1@... [SOUTHBENDLATHE] <SOUTHBENDLATHE@...> wrote:
 

I tried a dead center and got the same bad results. My finish cut was about.005.




--
"well, I stand up next to a mountain- and I chop it down with the edge of my hand"
Join SouthBendLathe@groups.io to automatically receive all group messages.