Re: Star wheel reverse screw


armne@sbcglobal.net <armne@...>
 

Corectiom it is a 10-32 left handed thread.
Alec

--- In southbendlathe@yahoogroups.com, "armne@..." <armne@...> wrote:

  Well I got lucky and it was a left hand 12-28 thread and it came out with a rt. hand 5/32 drill, now were can I find one or do I single point one!
Thank You
Alec
 PS  Picture posted


________________________________
From: Jim B. <btdtrf@...>
To: southbendlathe@yahoogroups.com
Sent: Sunday, August 4, 2013 6:13 PM
Subject: Re: [southbendlathe] Star wheel reverse screw



 
0.188 is close to a #10, but SB uses a lot of #12's (0.212)

Best to have a member measure his.
Jim B
Sent from (behind) my South Bend Heavy 10 Lathe

Join SouthBendLathe@groups.io to automatically receive all group messages.