Re: CrossFeed Screws


Steve Wells
 

Rick,
Send me you shipping address by e-mail.
yes, same as 10K.

Steve
wswells@...


tuffree wrote:

Hello Steve
If this screw will work on a 10K, I'd be interested in one if you
have any left.
Thanks, Rick

-- In southbendlathe@yahoogroups.com, "Steve Wells" >
wrote:
>
> It's time for everyone to give their opinon for me.
> These screws are hot off the rollers:
> 7/16 10tpi LH 3G acme in 1177 stressproof, 9" repair blank.
> Lead accuracy .003/ft or less, Straightness within .001/inch or
better.
> Tell me what you think, I need some members to repair a screw now
> with some free blanks from me and report the results to me.
> How about ten members?
> If you need the longer taper attachment screw I'll cut to length.
>
> http://www.wswells.com/photos/FS_1.JPG
> http://www.wswells.com/photos/FS_2.JPG
> http://www.wswells.com/photos/FS_3.JPG
> http://www.wswells.com/photos/FS_4.JPG
> http://www.wswells.com/photos/FS_5.JPG
> http://www.wswells.com/photos/FS_6.JPG
> http://www.wswells.com/photos/FS_7.JPG
> http://www.wswells.com/photos/FS_8.JPG
>
> Steve
>

Join SouthBendLathe@groups.io to automatically receive all group messages.