Re: South Bend indexing centers unit cat #ce9635


fred eisner
 

hi guys
i have the parts breakdown for the index centers
if anyone has a need for a copy email me and ill send it to you
if anyone has different paperwork i would appreciate a copy
thanks fred
imsteamer21@...



To: southbendlathe@...
From: eng4turns@...
Date: Mon, 16 Apr 2007 13:41:22 +0000
Subject: [southbendlathe] Re: South Bend indexing centers unit cat #CE9635

Also for use on a shaper.

Ed in Florida

--- In southbendlathe@yahoogroups.com, anthrhodes@... wrote:
>
>
> The Indexing Attachment is almost certainly intended for use with
a milling
> machine. The pins on the bottom are used to align the attachment
with the
> T-slots of the mill's table.
>
> At 5" swing it appears to be too large to fit on a lathe, and
there doesn't
> appear to be a way to mount it to the cross slide.
>
> Looks like a 72:1 worm drive. 5 degrees per revolution of the ball
handle, 50
> divisions would give 1/10 degree increments.
>
> Anthony
> Berkeley, Calif.
> ******************************************
> In a message dated Fri Apr 13, 2007 6:11 pm Pacific Daylight Time,
Bob writes:
>
> This indexing jig came with the new 10K I just picked up. One of
these
> jigs is pictured on e-bay #180104500537. I found the exploded parts
> list in southbendmanual files and a picture and general
description in
> a SB 1956 catalog but there is no operating and installation
> instructions that I can find. The unit came with a dog clamp that I
> need dimensions to machine a copy and it came with 2 pins that fit
> into the base. These pins are on my indexer but I don't know what
> their function is. I would be glad to pay copy and postage costs
for
> a zerox set of this information.
>
>
>
>
> ************************************** See what's free at
http://www.aol.com.
>


Join SouthBendLathe@groups.io to automatically receive all group messages.