Richard,

You ought to get together with Rose. She knows all there is to know
about these parts.

Glen Reeser


--- In southbendlathe@yahoogroups.com, "paul benoit" <pdkbb@e...>
wrote:

Richard,
Have you checked with Miller fabrication in the links? I know they

make these screws and nuts.

Paul


----- Original Message -----
From: Richard Hutchens
To: southbendlathe@yahoogroups.com
Sent: 5/19/2004 1:53:34 PM
Subject: [southbendlathe] Wanted, Heavy 10 used cross feed screws.


I am looking buy used, compound and cross feed screws and nuts for

a

heavy 10. The condition isn't important(bent, worn out,or rusty).
I need them with and without the taper attachment. Also need
compound screws for the 9" through the 13" lathes. I am going to
match them up to see what I have.

Hutch.



--
Web: http://groups.yahoo.com/group/southbendlathe/
More pix: http://groups.yahoo.com/group/SouthBendLathePix/
Newbie guide: http://smaa.techwood.net/SBL/Newbie.pdf
FAQ:

http://groups.yahoo.com/group/southbendlathe/files/SouthBendLatheFAQ.h
tml

Post: mailto:southbendlathe@yahoogroups.com
Email Moderators: mailto:southbendlathe-owner@yahoogroups.com
* * * * *
Manage your subscription by sending a blank message as follows:
Unsubscribe: southbendlathe-unsubscribe@yahoogroups.com
Stop delivery: southbendlathe-nomail@yahoogroups.com
Daily digest mode: southbendlathe-digest@yahoogroups.com
Individual emails: southbendlathe-normal@yahoogroups.com





Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/southbendlathe/

To unsubscribe from this group, send an email to:
southbendlathe-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.