Currently on Ebay...
Vtg South Bend Lathe Works Headstock Spindle Sleeve Catalog No. 205-N, orig box! $49.99
So what Morse Taper is this? And will it fit my 9A? ;-\
From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> on behalf of rlm_mcv via groups.io <rlm_mcv@...>
Sent: Wednesday, June 1, 2022 1:20 PM
To: SouthBendLathe@groups.io <SouthBendLathe@groups.io>
Subject: Re: [SouthBendLathe] 14-1/2 spindle nose and taper
I would check closer before making that MT4 as I think it would be a very thin sleeve and could prove it's self problematic in use and removal.
On Wednesday, June 1, 2022, 12:15:06 PM CDT, Bill in OKC too via groups.io <wmrmeyers@...> wrote:
Might want to add an MT4 while you're at it. Just in case. It will be a while before I need one, but the Smithy CB-1220XL 3-in-1 machine my brother decided I needed has an MT4 spindle, MT3 tailstock, and came fairly well tooled for a lathe that never got used. My Atlas TH42 uses MT3/MT2, and I somehow wound up with a fairly nice little chuck on an MT1 taper long before I got my first lathe. The Atlas MF milling machine uses MT2, also. Having the variety of adapters means you don't have to be so careful as to what Morse-tapered tooling you buy. ;)
Bill in OKC
William R. Meyers, MSgt, USAF(Ret.)
Aphorisms to live by:
Improvise, Adapt, and Overcome.
Physics doesn't care about your schedule.
The only reason I know anything is because I've done it wrong enough times to START to know better
On Wednesday, June 1, 2022, 12:05:52 PM CDT, rlm_mcv via groups.io <rlm_mcv@...> wrote:
I have not but would say that is your call. You can also ream the finish internal taper using a Morse Taper finish taper in the tail stock. I would only do this turning the spindle by hand not under power.
Conciser making MT1- MT2- MT3 adapters and a blank or two while you are setup?
On Wednesday, June 1, 2022, 11:50:18 AM CDT, Rangelov <rangelov@...> wrote:
That will make it easier to hold and keep it true.
Should mark spindle and adapter in case the adapter is removed and reinstalled. Probably unnecessary since is probably true. But why not?