1. posterid:1077108
  2. Cutting Off / Parting

Re: Cutting Off / Parting

rlm_mcv
 

Inline image


On Tuesday, June 29, 2021, 9:36:34 PM CDT, G K via groups.io <bug_hunter2000@...> wrote:


Unfortunately, no go with 1/2-inch. When I measure the opening I get 0.445 to 0.486. Maybe 7/16-inch. Can’t find those anywhere.




On Tuesday, June 29, 2021, 8:52 PM, wlw19958 <wlw-19958@...> wrote:

Hi There,

As far as I know, the 29 uses a 3/32" x 1/2" cut-off blade.  These
usually come about 4" to 4-1/2" long.  There are lots of them on eBay.

Good Luck!
-Blue Chips-
Webb

Join SouthBendLathe@groups.io to automatically receive all group messages.