Re: SB 9A Feed questions
The star knob engages a clutch. This clutch feature is useful fortoggle quoted messageShow quoted text
turning up to a shoulder. I engage the proper feed gear,
longitudinal or crossfeed, and then turn the clutch knob until the
tool starts moving and maybe a scoche more so it won't hesitate if
the gibs are a bit tighter at one end or the other. I keep one hand
on the knob so I can quickly disengage when the end of the cut is
reached. If you come up to a shoulder and are sleeping on the job
the clutch should start slipping and not ruin your part. I don't
like to depend on this, though.
Some people have reported sticky clutch problems when the apron has
not been cleaned out or flushed with kerosene for 60 years. Make
sure it all works as I described befor you start taking a 1/2
diameter reducing cut on an expensive piece of metal.
--- In firstname.lastname@example.org, "qbox09" <mg.bug@v...> wrote:
I couldn't find this in the How to run books.