toggle quoted messageShow quoted text
Jim, did I send you a copy of the workshop/10k conversion instruction manual I’ve been working on for the last couple of years, I believe I have finished it. If I didn’t send it, would you mind reading it for me and letting me know if you find any errors or anything not clearly explained, before I publish it.
On Mar 2, 2021, at 8:09 PM, Jim_B <jim@...> wrote:
Steve: I was thinking of your project to fabricate the large dials themselves.
On Mar 2, 2021, at 7:46 PM, Steve Wells <wswells@...> wrote:
Jim, I think he meant is that the same cross-feed assembly in those photos,
as your large dial project I posted on the website, yes it’s same I assume.
From: SouthBendLathe@groups.io <SouthBendLathe@groups.io> On Behalf Of Jim_B
Sent: Tuesday, March 2, 2021 7:38 PM
Subject: Re: [SouthBendLathe] Threading Stop Bolt
The write up is in the files section.
On Mar 2, 2021, at 7:21 PM, Jim_B <jim@...> wrote:
No it’s one I did based on the SB design . The cross feed dial is SB OEM that I got from Steve. The compound dial I made. There should be a detailed write up in the files section. It’s all ball/Roller bearing mounted.
On Mar 2, 2021, at 7:05 PM, ww_big_al <arknack@...> wrote:
Is that large dial convertion the one Steve Wells published?
Here is one I made for my 9” Workshop.
I wont say it follows the SB design. I just made it from what I thought a stop should do. I did not lock the adjusting screw. I mad a tapered shoe to bare against the way.
I will say I seldom used it.
On Mar 2, 2021, at 1:46 PM, trackthatpot2000 <timmsken@...> wrote:
I was thinking of making a threading stop for my 13 ..how do you stop the screw from rotating when in use? ..is there a spring or a locking nut or something like that?