Re: 9inch c to a conversion
toggle quoted messageShow quoted text
Just to add a bit. The crossfeed leadscrew for the A and B lathes has a gear at the end which meshes with a gear in the apron which serves to turn the crossfeed lead screw. The C model which does not have power cross feed and does not have the gear. My lathe is a 415 not technically a model C. This might be why some work wasa needed to give clearance for the gear on the cross feed lead screw.
On Saturday, October 17, 2020, 12:47:21 AM EDT, john kling via groups.io <jkling222@...> wrote:
As I recall might be a difference and some filing was required to allow the gear on the different cross feed screw to mesh with that in the apron.
On Friday, October 16, 2020, 9:07:26 PM EDT, Patrick Murphy via groups.io <p.murphy22@...> wrote:
Hi all i am in need of some info. Does anyone know if the saddle on the A and C are the same. I am converting C to an A and am at the assembly stage and the aprin is rubbing on the bottom .edge of the bed its just barely rubbing on the tin cover of the worm. The lathe is a 1936 vintage and is in mint condition so I thought I would convert it to an A. I bought the parts on Ebay and was lucky that all I bought were in very good shape. I am wondering if the bed castings on earlier lathes were a little wider at the bottom, if that is the problem I can trim the casting but I want to make sure there is no problem with the carriage and aprin