Re: 9" motor start switch
toggle quoted messageShow quoted text
Not sure of wattage rating or type. I think I used 1/2 watt. There is plenty of info out on the net. The resistor serves to bleed down the charge on the starting capacitor.
From: "Chips" <sakr4360@...>
To: "SouthBendLathe" <SouthBendLathe@groups.io>
Sent: Tuesday, April 28, 2020 9:54:01 AM
Subject: Re: [SouthBendLathe] 9" motor start switch
Thanks RB will ebay order one. Carbon or wire wound. 1/8 watt or bigger.