Jim, I will have to regret till another time. I am working on getting my knee back working after surgery so my time and efforts are going in another direction. I thought I would be able to handle anot

#morsecodetutor #bareboards #mct

James, I would start another topic to see if anyone is interested in a "group buy" of these MCT boards. You would likely get more traffic with a new topic. 73/Best regards, Jim KK4NA

#morsecodetutor #bareboards #mct

Let me know who's heading up the orders. I will take two boards if its a go and can work out the logistics with others. Regards James KB9NBL

#morsecodetutor #bareboards #mct

Gerald, As stated above, all three boards are taken. Thank you for your interest. I would suggest that the folks who were interested but not able to get into the first three slots for these boards get

#morsecodetutor #bareboards #mct

Jim, if you have a board left I would like one. If you have one, let me know and I will send you a check for $5.50. Thanks, 73 Gerald AG5MY

#morsecodetutor #bareboards #mct

Not meaning to hijack Jim's thread but I have several bare boards for the STM32 version...the non-wifi version. If anyone is interested please contact me. 73... Mark AA7TA

#morsecodetutor #bareboards #mct

Here is the list of people who have a board awaiting for their payment: Dick W4PID Guy WB7SZI Bob AK5U Thank you all for your interest. And Eb, I will send the information you requested very soon now.

#morsecodetutor #bareboards #mct

Hey Jim, Yes, 719 Emerald Bay Drive Salisbury NC 28146 is the correct address.. No I don't think I have the display. I have two or three in the box, and one of them may be right, but I can put that to

#morsecodetutor #bareboards #mct

Good afternoon Dick! I will set one aside for you. I will post it to your Salisbury address, is this correct? A personal check made out to "Jim McGinnis" for $5.50 works just fine. If you don't alread

#morsecodetutor #bareboards #mct

Hi Jim, I am interested in one board. I'll gladly ship $$ to specified address :) Dick W4PID

#morsecodetutor #bareboards #mct

Greetings: I just completed a ESP32 based build of the W8BH Rev 2B board. I ordered five (5) boards from JLCBCP and now have three (3) boards that are spare. The boards were not expensive. But the shi

#morsecodetutor #bareboards #mct

That's awesome Howard! You're officially an open source coder! 73 Brian

#mct

With a special thanks to Tom, WB6B, for his words on using GitHub, I was to get an account on github, and then update the SPIDevice.cpp file in the Adafruit_BusIO library. I took 8 commits to get it d

#mct

Howard, truly brilliant. I could see the problem, but had no idea how to fix it. Your new code compiles fine. I will upload to one of my BPs and see how it likes it.

#mct

Various errors, finding the ones I had introduced, deleted redundant library referenced and tried different libraries and different versions...Pared down to the error you referenced and made this chan

#mct

Tom, Thank you so much for the detailed explanation. With the Thanksgiving festivities I hadn't had time yet to write up a reply so I appreciate you taking the time to do so. Much appreciated. Brian

#mct

Actually you do both a fork and a branch. Git is fundamentally a distributed version control system. Other systems like SVN rely on a central SVN repository server. GitHub somewhat blurs the lines as

#mct

Hi Brian, I do understand what you mean by "fork" the Adafruit library. I haven't used github before, and I though that would have been a branch operation. Are you suggesting a different tool to do th

#mct

Howard, Fork the Adafruit library, make your changes, then substitute your library for theirs in the IDE. You can also send a pull request to Adafruit for them to pull your changes into their library

#mct

Hi Jack, I changed the AdaFruit_SPIDevice.cpp file that was in the AdaFruit_SPIDevice folder located in the Libraries folder using a text editor. When I compiled the total sketch, the error that I rec

#mct