I wrote graphing routines about 10 years ago. I recently incorporated them in a CSV graphing app, because the spreadsheet graph doesn't even come close to the features of this one. I think it will wor

Hi all When updated the sitech software to 0.95G ( latest ) does it also update the Servo config utility which is at v1.30 Thanks in advance Jas

Hey Don W. or Chuck S. I hate to interrupt the "I'm a Mac and I'm a PC" debate, but I have a question about how Servo Config calculates the slew speeds. What other parameters would change how Servo Co

Hi, first post to the group. Have just ordered a Mesu 200 which has the Sitech controller - unfortunately 10 weeks before I should get it..WANT IT NOW! I use Indi to control my stuff now (and love it)

This from Thomas Mathis: ========================== Mike, Sorry for the delay in answering your email. It get lost in a flood of new year traffic. Voyager 4.5 does not work with Sitech. This seems odd

Hi If anyone uses the new Mesu mark 2 mount with Voyager software please get in touch. TIA J

I am now thinking more of getting a Servo Controller II over a ServoCat Jr. It would be fixed to an 8" F6 dob mount I am trying to automate. May primary question at this point is "would a 40k encoder

Hi, I am setting up my newly purchased Mesu 200. I am able to control the scope, i.e. slew, read from the controller and write to the controller, from my PC using SiTechExe without problems. However w

https://xkcd.com/2413/ A third way to hurt your hand is covered in the SiTechexe manual. Draft ver. 1.1, Para. 2.3.3. Do NOT get your fingers in the blades!

I have a more fundamental problem - can't even get servoconfig program to open on laptop (Windows 10). I did find some instructions deep in the documentation outlining a particular order of installing

Beware of any Messenger message from me with a video file attached. It was not from me and delete it. My Messenger was hacked and that message was sent to many in my address book. Luckily the rest of

Hello All, Newbie (to SiTech) here, in the process of rebuilding my scope to incorporate motors, etc. and Servo I controller for visual observing only. Have been monitoring group activity for some tim

Hi All, I am trying to add the 40K encoders i got from sitech on to my mount. Can someone walk me through the calculation please, thanks. Greg W

Hello again and thanks for all the previous help. Here is my follow up: I had my mount shipped back to Lucas Mesu. He found a broken DEC motor encoder and readjusted the friction drives. I could check

I can't seem to get this borrowed Windows 10 laptop to talk to my Servo 1 controller. When I hook things up it continues to give me a message (in Servo Config) that it is unable to communicate on Port

Hi Taj, Dan or All, Does anyone know if the A & B channel from a Servo I controller should show voltage when NOT connected to encoder? The Servo I uses an 8 pin modular plug which shares RA & Dec moto

Hello all. I sit here with egg on my face and would prefer to hide but I think its always best if you get the real facts. On Christmas eve I though I had found my motor direction problem as explained

Dear All I'm converting an existing track and go to system from OrionSkyquest XX14G to Sideral Technology. I'm using Servo Controller II, the hand pad and the ServoConfig app. I wired the azimuth moto

Gentlemen, I am returning to homebuilt mount activity after I stopped 12 years ago. I have restored my Servo1 system that was used on a 15 equatorial fork mount and now have it on a small homemade equ

I am experiencing some problems with restarting tracking after a meridian flip on a Mesu 200 Mk II. Due to the glorious weather we have been blessed with, last night was the first night I have been li