Servo Controller DSTC-1 home capability

Russell R

Yes,  Pin 6 of the auxiliary port is supply voltage (5 volts), pin 1 is RA and pin 2 is Dec.  

For a focuser it is pin 1 and rotator is pin 2.  On focuser, this works in only one direction in the software checkbox (On true move xxx), not sure about RA & Dec. 

See page 112 - 116 of setup manual.
Setup manual is under supplemental documentation of SiTech website.

Russell R.


PG Astro Society

Does the AUX port on the Servo Controller DSTC-1 support homing the telescope or do I need to upgrade to the Servo Controller II?