If you use gmail you may have gotten a message about your email bouncing. It was due to a massive Google outage. Chuck Shaw Begin forwarded message: From: David Bryant <david@...> Date: D

#question

What program are you running that you want to connect to the SiTechexe system? ASCOM is a stand-alone program. You are choosing the wrong setting for SiTech, use SiTechDLL Telescope, not ASCOM.SiTechD

#ascom #mesu #question

I'm in the process of constructing a 30" dobsonian telescope with friction drive on azimuth (5" friction wheel against a 30" disc) and altitude (large side bearings (54") on two horizontal shafts (1.4

#question

I'm working through Quick Start for Basic Ops, Alt/Az (as I should have done before my first post...). I can do 1 star OK but not great. That is, even at 167x with illuminated reticle, there is some d

#question

Sorry for noise. ServoConfig1.3 needed to release the port before SiTechExe could access. ServoConfig1.3 is running, comm port is set up and the virtual hand pad does physically move the telescope. Bu

#question

In my version of SiTechExe (v3.9) "azimuth" is given both in the numbers tab and in the controller information window. However, it doesn't seem to be user configurable, either directly or by syncing t

#question

Hi Russell, of course I use Prolific Converter :( I will test FTDI. USB to Serial: there are USB to RS232 and USB to TTL converters. There is a difference in logic levels. I remember now, that I had s

#question

Thank you Don for the reply, helped me a lot. best regards

#question

Hello all, Do you know what is the latest version of SiTechexe and will it be possible to provide a link to its location? Thank you. Alvaro

#question

Bill, Here is a build blog of my recent project: https://www.cloudynights.com/topic/743577-rebuilding-my-50-cent-20-inch-string-telescope/#entry10704656 Should help you visualize and understand the pa

#question

Hello, I am looking in the file INDI_Instructions.txt, Step 2, Install SiTech. I download the archive http://siderealtechnology.com/SiTechInstallerLinux.zip and unzip it and run SiTechInstaller.sh as

#question

Hi All, I'm about to start trying to manage cables on this setup. Does anyone have any advice on best practices, how much slack to leave, pinch points to watch out for, etc. Like, If I make it ship-sh

#question