Re: How do I connect SiTech.exe over TCP/IP network to a ZWO ASI533 camera connected to a 2nd laptop?

Don W

Hi Rusty,
ServoConfig has the controls for how the mount moves for the different speeds.  Look at your settings for the Guide Speed.  Normal guide speed is 1X or 15 seconds per second.  With that setting, when you press "East" tracking will stop and the ra servo will not move.  If you have a setting much less than 15 sps, then the tracking of the RA servo will go West.  The RA servo will move at the rate = Sidereal rate minus the Guide Speed rate.

So on your table top, set the Guide speed to 15 sps.
Don W

Join to automatically receive all group messages.