Re: Track past Meridian 95p
Hi, I found the same issue with track Past Meridian overlap setting.
I decided to set it to 0. and only use meridian limits because I experienced same as you « no matter what I set the track past the meridian , the tracking will stop at the Meridian, and not track past the deg set in the track past meridian box »
Le 2 juin 2021 à 18:25, pburke@... a écrit :
Not sure what I'm doing wrong but I can't get SiTech to track past the Meridian..
In my mount parameters (GEM) meridian limits are set to
Over Pole. Under Pole
00:00:00. Marid west. -180:00:00
00:00:00. Marie east. 180:00:00
08:00:00. Track past Meridian Overlap
In the sky view it shows the proper limits. If I change the track past maridian setting it also shows the change in the sky view.. With only Sitech running and nothing else connected to the mount, no matter what I set the track past the maridian, the tracking will stop at the Meridian, and not track past the deg set in the track past maridian box.
I can set the Meridian west limit to -178:00:00 and it will track past the Meridian fine, but with the GEM Auto flip go to checked if I initiate a goto west of the Meridian within the -178 limit, the mount wont flip.
Am I wrong in thiking that if the west limit is set to -180:00:00 and the track past the Meridian Overlap is set to 08:00:00 that the mount should track 8 deg past the Meridian before it stops tracking..... What am I missing?
Ive read till my eyes fell out and have run at least 15 test scripts trying to get the mount to flip properly with Voyager, and I'm clueless....