Re: saving the tracking change to the controller

Don W

Hi Gary,
In ServoConfig when changing the Equatorial Rate, you then must both "Send Configuration to Controller" and "Save Controller Configuration to Flash ROM".

When you run SiTechexe and watch the value for RA, it won't change the RA value shown at the bottom of the SiTech window nor in the SkyView display.  The only way to check if the rate has actually changed is to track a star in the sky.

However there is another way to modify the tracking rate (separate from ServoConfig), in SiTechexe you can use Offset Tracking Rates in the Features Tab.  This will definitely change your tracking rates, but it can not be saved for another session.

Don W

Join to automatically receive all group messages.