I saw on ebay a rather large listing of pictures of shelf, type E and tight lock investment couplers being made and sold in china via Ebay. I am new to this group, having purchased a large amount of S

Franks website before this message said he was out. Some of you may know by now but, Sergent Couplers are no longer...😔 Eric Xing...you are it!!! If anyone is selling their Sergent couplers, let me/us

Moving from HO to O and I uncovered a package of EN87KB couplers. I came with 144 couplers and 95% or more are still there. I'd like to sell the majority remainder of these (estimate 125-135+) and ask

So here are the results of today's labor. I see that I will have to run the flask a bit hotter when I pour, but otherwise great results. 😀 Chris Sent from my Apple propaganda device.

Chris, I read your earlier e-mail that this was on your to-do list. Do you have any time frame for these? I will buy 50 pair.

I have been assembling these from a bulk order. I'm finding many (some 75%) of the knuckles are falling out. The first symptom is that the cars won't couple up -- the ball won't drop. Then the knuckle

Hi all, I received these tightlock couplers from Eric Xing, Inventive Models, today and they are definitely everything that was promised, thanks Eric!!!

Hi folks. Here is a small test run of Type E & F couplers in castable resin. I plan to investment cast them in ZA-12 over the weekend. My previous test and subsequent assembly of prints run in ABS res

Hello, This is my second attempt at an introduction email, hoping this goes through. Have an interest in the Sergent couplers as they are the closest thing to the real deal. -Chris Roberts Sent from t

I am in the process of converting my newly acquired Broadway Limited ATSF 2-8-2 to Sergent couplers and have run into a challenge. When simply replacing the factory coupler the standard E87 coupler is

Hi, I'm Andrew and I've justt started to have investigate Sergent Coupers. I'm hoping to find out some installation tips, especially with regard to scale draft gear on locomotives. Andrew

A friend of mine in S scale has asked me about the availability of Sergent's S or HO scale passenger car uncouplers. I don't think that there ever was one in O scale. Are any of these still available?

I am a long time model railroader. HO is my preferred scale and I model the Great Northern Railway. My great grandfather and grandfather both worked for the Great Northern in North Dakota which is how

I grabbed some Sergents off eBay. It included 2 packs of SEC87Ks and 2 packs of FC87Ks. I don't need them, will trade for other no-longer-available couplers better suited to the steam / transition era

Hi all, Sadly as I leave HO scale I must part with my beloved Sergent Couplers. So far all the rolling stock I have sold has been dispersing Sergents to the country however I still have a large supply

Hello, I don't recall seeing how anyone mounted Sergents on their Branchlines Pullman. Here's what I came up with so far. I flipped one of Smoky Mountain Model Works coupler boxes upside down. The sol

I reported previously that I had replicated the Kadee whisker coupler centering technique for Sergents. That was using some .008 Nitinol super-elastic wire that I had on hand. I ordered some .005 wire

On this forum I have proposed several solutions for self centering but I am always striving to improve. I admire the Kadee "whisker coupler" technique and wondered if it could be adapted. I grabbed my

Some of you may consider this post a bit off topic, but since this group focuses on couplers, passing along this eBay listing that might be of some interest. BTW: I have absolutely no interest or asso

I broke one of my Sergent uncoupling wands. Dropped it on the floor and it broke cleanly in two. Glued together with CA, broke again, same place. So, enough of that. Glued it again but then enclosed i