Date   
Re: Coupler stock

roblmclear
 

Nice to hear from you again Frank, any news on the short shank type E's yet or is that one of the items that the printer is causing problems with.

Rob McLear
Aussie.

Re: Coupler stock

Frank Sergent
 

Hi All,
 
Trying to answer a bunch of questions at once...
 
Alan: Really bad/unfixable. I wouldn’t say that. I can’t stand to not work on a problem. Time frame for solution is totally unknown though.
 
Chris: Post to Facebook group. Sure. No secrets here.
 
 
Ed: Critical mass. Yes. Various shank lengths are very important. Wish I still had them. Dummy couplers sold out very quickly once I announced they were going away.
 
Chris: 3D Printers supposed to be better now. The old printer was a high dollar EnvisionTec. Done with those guys. Too hard to deal with.
 
Wayne: EC64 knuckles are diecast but the bodies are investment cast. Knuckles are no good without the bodies. I still have several 1000 knuckles and a $12k die cast mold for the knuckles that I can’t use.
 
Nathan: Rolling your own with knuckles and balls sourced from me. Sounds great. Good luck. Let me know how I can help.
 
Frank
 
 
 
 

Re: Coupler stock

Edward Sutorik
 

Alan,

Thanks for the info.  While perhaps workable in an emergency, I don't intend to operate in a "continual state of emergency".  That is, I either convert a batch of cars to Sergents, or I don't.  

My first batch conversion was for most of my Bethgon's, and their locomotives.  That's where the dummy couplers came in handy, since I run them as a unit train.

Lately, I have started converting my more modern intermodal cars.  This will now have to stop.

I had been planning to convert my passenger cars to Sergents, also.  This now won't commence.

Once converted, the above rolling stock (and their locomotives) will not interact with Kadee equipped rolling stock.  So the need to couple Sergents and other couplers is near zero.

Incidentally, I use only the non-shelfed type E's; as I want to be able to uncouple "vertically", if I wish.  Inauthentic, admittedly.  But, then, I can use my choice of 4 shank lengths if I can get them.


Ed

Edward Sutorik

Re: Coupler stock

Alan Hummel
 

Edward,

It's a "pain" but I have Kadee&McHenry scale couplers on most of my newer rolling stock and my Sergents will couple to both. Hands are sometimes needed to finish the couple but they DO work. When coupling push the Kadee or McHenry&the Sergent to the 1 side so the Sergent can grip the foreign coupler's knuckle. When uncoupling uncouple the Sergent's knuckle 1st. 

Hope this helps.

Alan Hummel

On Thursday, December 6, 2018, 12:41:11 PM EST, Edward Sutorik via Groups.Io <Edwardsutorik@...> wrote:


Regarding the dummy couplers:

I recall Frank saying the dummies were discontinued and that he had enough to last for awhile.  I tried to order some "after awhile" and couldn't find them on the website.  I thought they were perhaps sold out.  But I also thought they perhaps were not, and it just didn't show on the website.  That is why I asked the question.  On July 23rd.

As far as the many other sold out couplers:

I am at a point where I need various shank lengths of Sergent couplers to continue my conversions.  Without them, I can't proceed.  Which then means my conversion to Sergent couplers can't proceed.  Because I need a "critical mass" of Sergent equipped cars to make the conversion workable.


Ed

Edward Sutorik

Re: Coupler stock

Wayne Essel
 

Hi,

What about the S-scale die cast coupler, EC64K?

Regards,

Re: Coupler stock

Christopher Zurek
 

Frank,

Oh crap, that really sucks. I'm still in need of more Type H and Type F couplers, and I need a bottom cover for a short Type F.

3D printers are supposed to be better now. What were you using before?

Chris Z.

On 12/5/2018 10:01 PM, Frank Sergent wrote:
Here I am!
 
The new printer appears to be a bust and I’m pretty much out of stock on all of the investment cast stuff. I haven’t given up completely, but I’m not sure what else to try. I wish I had better news to tell. After months of messing with the thing and waiting for custom parts that don’t fix the issues, the accuracy and reliability is still not there. Its all pretty disheartening actually. I’m kicking around ideas about building my own printer but that seems like more than I can take on at this point.
 
The die cast stuff (EC87, EN87, SBEC87, and Sharons are still available and will be for the foreseeable future.
 
Not sure what the question was about dummy couplers, but those are no longer available either. Those were a neat product made by Frank Glatzl that nicely complemented my line. He decided to discontinue the product. I bought everything he had left and now I’m sold old. I’m not sure what else to say there.
 
Sorry guys.
 
Frank

Re: Coupler stock

Edward Sutorik
 

Regarding the dummy couplers:

I recall Frank saying the dummies were discontinued and that he had enough to last for awhile.  I tried to order some "after awhile" and couldn't find them on the website.  I thought they were perhaps sold out.  But I also thought they perhaps were not, and it just didn't show on the website.  That is why I asked the question.  On July 23rd.

As far as the many other sold out couplers:

I am at a point where I need various shank lengths of Sergent couplers to continue my conversions.  Without them, I can't proceed.  Which then means my conversion to Sergent couplers can't proceed.  Because I need a "critical mass" of Sergent equipped cars to make the conversion workable.


Ed

Edward Sutorik

Re: Coupler stock

Christopher Zurek
 

Frank,

Do you mind if I post this to my Sergent Coupler Facebook group?

Chris Z.

On 12/5/2018 10:01 PM, Frank Sergent wrote:
Here I am!
 
The new printer appears to be a bust and I’m pretty much out of stock on all of the investment cast stuff. I haven’t given up completely, but I’m not sure what else to try. I wish I had better news to tell. After months of messing with the thing and waiting for custom parts that don’t fix the issues, the accuracy and reliability is still not there. Its all pretty disheartening actually. I’m kicking around ideas about building my own printer but that seems like more than I can take on at this point.
 
The die cast stuff (EC87, EN87, SBEC87, and Sharons are still available and will be for the foreseeable future.
 
Not sure what the question was about dummy couplers, but those are no longer available either. Those were a neat product made by Frank Glatzl that nicely complemented my line. He decided to discontinue the product. I bought everything he had left and now I’m sold old. I’m not sure what else to say there.
 
Sorry guys.
 
Frank
 
 

Re: Coupler stock

Alan Hummel
 

Frank,
This sounds really bad,almost "unfix-able."(?) I was just headed back to HO from O looking forward to outfitting everything to lower/upper shelf couplers,but this sounds like I may never get them except if I can stand Kadee or McHenry which aren't options for me. Am I reading too much into this present setback? Investment cast couplers have had many difficult periods over the years as I recall-is this one in a major way more serious?

Alan Hummel

On Wednesday, December 5, 2018, 11:01:17 PM EST, Frank Sergent <fsergent@...> wrote:


Here I am!
 
The new printer appears to be a bust and I’m pretty much out of stock on all of the investment cast stuff. I haven’t given up completely, but I’m not sure what else to try. I wish I had better news to tell. After months of messing with the thing and waiting for custom parts that don’t fix the issues, the accuracy and reliability is still not there. Its all pretty disheartening actually. I’m kicking around ideas about building my own printer but that seems like more than I can take on at this point.
 
The die cast stuff (EC87, EN87, SBEC87, and Sharons are still available and will be for the foreseeable future.
 
Not sure what the question was about dummy couplers, but those are no longer available either. Those were a neat product made by Frank Glatzl that nicely complemented my line. He decided to discontinue the product. I bought everything he had left and now I’m sold old. I’m not sure what else to say there.
 
Sorry guys.
 
Frank
 
 
Sent: Tuesday, December 04, 2018 10:49 PM
Subject: Re: [Sergent Engineering] Coupler stock
 
Well unfortunately I have tried sending multiple emails in the last few months with no success, someone mentioned he heard Frank was getting all his emails sent to spam so he wasn't getting them, so I figured I'd ask on here. None of the type Fs or long shank lower shelfs are showing in stock and it's been months since they announced the new printer

Re: Coupler stock

Todd Fisher
 

Frank, thanks for the response while I'm sure that's not the responseany of us were hoping for, I know I can say for me at least we have an idea of what's going on. As popular as your couplers have become I can say I certainly hope you all can come up with a solution for the printer problems. I hope to soon see the type Fs and the long shank lowers come back up as well. Thanks again Frank. 

Re: Coupler stock

Bill Keene
 

Ed,

Regarding the dummy couplers... 
If I remember correctly, I believe that Frank did mention that the dummy couplers would be discontinued once the supply was exhausted. I believe he even provided the reason behind this decision. 

Suggest searching the archives of the chat site for his transmission. 

Cheers,
Bill Keene
Irvine, CA


On Dec 5, 2018, at 6:32 PM, Edward Sutorik via Groups.Io <Edwardsutorik@...> wrote:

And an answer to my question of July 23rd about the dummy couplers would be nice, also.


Ed

Edward Sutorik

Re: Coupler stock

Frank Sergent
 

Here I am!
 
The new printer appears to be a bust and I’m pretty much out of stock on all of the investment cast stuff. I haven’t given up completely, but I’m not sure what else to try. I wish I had better news to tell. After months of messing with the thing and waiting for custom parts that don’t fix the issues, the accuracy and reliability is still not there. Its all pretty disheartening actually. I’m kicking around ideas about building my own printer but that seems like more than I can take on at this point.
 
The die cast stuff (EC87, EN87, SBEC87, and Sharons are still available and will be for the foreseeable future.
 
Not sure what the question was about dummy couplers, but those are no longer available either. Those were a neat product made by Frank Glatzl that nicely complemented my line. He decided to discontinue the product. I bought everything he had left and now I’m sold old. I’m not sure what else to say there.
 
Sorry guys.
 
Frank
 
 

Sent: Tuesday, December 04, 2018 10:49 PM
Subject: Re: [Sergent Engineering] Coupler stock
 
Well unfortunately I have tried sending multiple emails in the last few months with no success, someone mentioned he heard Frank was getting all his emails sent to spam so he wasn't getting them, so I figured I'd ask on here. None of the type Fs or long shank lower shelfs are showing in stock and it's been months since they announced the new printer

Re: Coupler stock

Edward Sutorik
 

Yes, it would be nice to know when all those couplers might be back in stock.  I've got an assortment of projects waiting, and I'm wondering whether to pack them up and clear the bench.

And an answer to my question of July 23rd about the dummy couplers would be nice, also.


Ed

Edward Sutorik

Re: Coupler stock

Todd Fisher
 

Well unfortunately I have tried sending multiple emails in the last few months with no success, someone mentioned he heard Frank was getting all his emails sent to spam so he wasn't getting them, so I figured I'd ask on here. None of the type Fs or long shank lower shelfs are showing in stock and it's been months since they announced the new printer 

Re: Coupler stock

Logan Thurman
 

Haven't heard anything.


On Tue, Dec 4, 2018 at 5:13 PM Todd Fisher <tftrainman1@...> wrote:
Has anyone heard from Frank regarding the couplers that are still showing out of stock? Maybe a time frame when they may be back?

Re: Coupler stock

Tom Colasurdo
 

Todd:

I just placed an order via website a little more than two weeks ago ... received my order about a week ago.

Frank did respond quickly to my direct e-mail ... may want to give e-mail directly.

V/r,
Tom C.



On Tuesday, December 4, 2018, 7:13:22 PM EST, Todd Fisher <tftrainman1@...> wrote:


Has anyone heard from Frank regarding the couplers that are still showing out of stock? Maybe a time frame when they may be back?

Coupler stock

Todd Fisher
 

Has anyone heard from Frank regarding the couplers that are still showing out of stock? Maybe a time frame when they may be back?

My Interest iN Group

Riley Kinney
 

Sergent couplers are so much more realistic and operate better so I don't bother with Kadee couplers. I remover them from RTR and use Sergent on building projects. I model the Charleston & Western Carolina in HO from Augusta, Ga to Greenwood, SC with some ACL locomotives I plans to decal for the C&WC and a 4-6-2 Broadway Limited undecorated I will decal too. Many of my cars are Sunshine or Yarmouth which will be decaled C&WC.

Riley Kinney



Re: Making the plunge!

redleg142@...
 

Hello, All.
 My name is Cecil Collum and I have been a member about three weeks and have purchased and assembled the six EC87 couplers in the starter kit. I alssembled one coupler without the fixture then bought one and assembly of the other five took only about 30 minutes.
 To prevent losing the tiny balls and springs, I used a jewlers tip and put the bottom of my shop apron on the benchtop, placed the parts on that and had no ptoblems with fly away parts. My apron is medium blue so the parts contrasted well.
 I am building an HO pike after thirty years of N scale modeling, so my railroad is not operational just yet.

Membership

Todd Fisher
 

My name is Todd Fisher and I am a new user of these fine HO scale couplers, I am a member of the Facebook group for Sergent couplers and would like to expand to meet even more users sothati may have other knowledgeable assistance when faced with any issues. I would very much like to join this group and look forward to meeting manyany more who share the same love for the Sergent line of couplers. Thanks