Date   
Joining message.

Scott Reinert <srlinesrr@...>
 

Hi Sergent engineering.

I would like to join this group after reading on the website about plans. I myself am an 1/8 th scale modeler and builder and was using your photos to develop my own couplers.

Thank you scott

Re: Joining message.

Nathan Rich
 

Did you see the files on the Sergent website? Very cool stuff. 

These couplers look great in NO scale and will certainly be stellar in 1:8. 

Nathan Rich 

On May 15, 2018 08:02, "Scott Reinert" <srlinesrr@...> wrote:
Hi Sergent engineering.

I would like to join this group after reading on the website about plans. I myself am an 1/8 th scale modeler and builder and was using your photos to develop my own couplers.

Thank you scott


Re: Membership Application

John Claudino <aztecmfg@...>
 

Peter,

Did you see anything on my brass list that you are interested in?

John

AZTEC MANUFACTURING CO.
2701 Conestoga Drive #113, Carson City, NV 89706
Phone  775-883-3327   •   Fax  775-883-3357
Email  aztecmfg@...   •   Web  www.aztectrains.com 
The world's finest model railroad track cleaners from Z to G 



On May 2, 2018, at 7:01 PM, Peter York via Groups.Io <peterdyork@...> wrote:

My name is Peter York and I live in Dallas, TX. 

I collect brass model trains in all gauges (Gauge 1, O, HO and N). My preference is for articulated steam (all roads), UP diesels and turbines and unique and unusual rolling stock. I currently own approximately 400 models.

My reason for joining this group is I have always wanted my models to be as accurate to scale and prototype as possible, and Sergent couplers are a perfect addition to any of my HO models.

I would be happy to provide references if you need them, as I am personal friends with most importers.

Thank you for your consideration.

Peter York
4414 Wildwood Road
Dallas, TX 75209

214-287-8886 (Cell)
214-351-1844 (Home)

peterdyork@...


Re: Membership Application

Peter York
 

Hi John,

Sorry to be late in responding. We have just begun a major remodel of our house and things have been a little hectic around here.

Can you give me a little more information on the following models, i.e., price, condition, Key custom series #, etc. Photos would be nice. Even just the box label; then I could do further research on them.

Key
AC-5 SP Early
AC-6 SP Modern Cab
AC-9 SP #3800 Coal
2-6-6-2 SP
FA1/FB1 UP Alco

Oriental
E-6A UP
E-6B UP

Thanks, and let me know if you have any questions.

Best regards,

Peter


On May 25, 2018, at 11:31 AM, John Claudino <aztecmfg@...> wrote:

Peter,

Did you see anything on my brass list that you are interested in?

John

AZTEC MANUFACTURING CO.
2701 Conestoga Drive #113, Carson City, NV 89706
Phone  775-883-3327   •   Fax  775-883-3357
Email  aztecmfg@...   •   Web  www.aztectrains.com 
The world's finest model railroad track cleaners from Z to G 



On May 2, 2018, at 7:01 PM, Peter York via Groups.Io <peterdyork@...> wrote:

My name is Peter York and I live in Dallas, TX. 

I collect brass model trains in all gauges (Gauge 1, O, HO and N). My preference is for articulated steam (all roads), UP diesels and turbines and unique and unusual rolling stock. I currently own approximately 400 models.

My reason for joining this group is I have always wanted my models to be as accurate to scale and prototype as possible, and Sergent couplers are a perfect addition to any of my HO models.

I would be happy to provide references if you need them, as I am personal friends with most importers.

Thank you for your consideration.

Peter York
4414 Wildwood Road
Dallas, TX 75209

214-287-8886 (Cell)
214-351-1844 (Home)

peterdyork@...



Re: Membership Application

John Claudino <aztecmfg@...>
 

Peter,

Did you see anything on my brass list that you are interested in?

John

AZTEC MANUFACTURING CO.
2701 Conestoga Drive #113, Carson City, NV 89706
Phone  775-883-3327   •   Fax  775-883-3357
Email  aztecmfg@...   •   Web  www.aztectrains.com 
The world's finest model railroad track cleaners from Z to G 



On May 25, 2018, at 9:31 AM, John Claudino <aztecmfg@...> wrote:

Peter,

Did you see anything on my brass list that you are interested in?

John

AZTEC MANUFACTURING CO.
2701 Conestoga Drive #113, Carson City, NV 89706
Phone  775-883-3327   •   Fax  775-883-3357
Email  aztecmfg@...   •   Web  www.aztectrains.com 
The world's finest model railroad track cleaners from Z to G 



Re: Membership Application

Peter York
 

John, sent you this email last night. Guess you didn’t get it. What’s your direct email?

Hi John,

Sorry to be late in responding. We have just begun a major remodel of our house and things have been a little hectic around here.

Can you give me a little more information on the following models, i.e., price, condition, Key custom series #, etc. Photos would be nice. Even just the box label; then I could do further research on them.

Key
AC-5 SP Early
AC-6 SP Modern Cab
AC-9 SP #3800 Coal
2-6-6-2 SP
FA1/FB1 UP Alco

Oriental
E-6A UP
E-6B UP

Thanks, and let me know if you have any questions.

Best regards,

Peter


On May 25, 2018, at 11:31 AM, John Claudino <aztecmfg@...> wrote:

Peter,

Did you see anything on my brass list that you are interested in?

John

AZTEC MANUFACTURING CO.
2701 Conestoga Drive #113, Carson City, NV 89706
Phone  775-883-3327   •   Fax  775-883-3357
Email  aztecmfg@...   •   Web  www.aztectrains.com 
The world's finest model railroad track cleaners from Z to G 



On May 2, 2018, at 7:01 PM, Peter York via Groups.Io <peterdyork@...> wrote:

My name is Peter York and I live in Dallas, TX. 

I collect brass model trains in all gauges (Gauge 1, O, HO and N). My preference is for articulated steam (all roads), UP diesels and turbines and unique and unusual rolling stock. I currently own approximately 400 models.

My reason for joining this group is I have always wanted my models to be as accurate to scale and prototype as possible, and Sergent couplers are a perfect addition to any of my HO models.

I would be happy to provide references if you need them, as I am personal friends with most importers.

Thank you for your consideration.

Peter York
4414 Wildwood Road
Dallas, TX 75209

214-287-8886 (Cell)
214-351-1844 (Home)

peterdyork@...




Groups.io Links:

You receive all messages sent to this group.



Re: Membership Application

Peter Burr
 

John, for some reason this came to me instead of Peter York. I’m not currently looking for brass.


On Sat, May 26, 2018 at 10:06 PM Peter York via Groups.Io <peterdyork=yahoo.com@groups.io> wrote:
John, sent you this email last night. Guess you didn’t get it. What’s your direct email?

Hi John,

Sorry to be late in responding. We have just begun a major remodel of our house and things have been a little hectic around here.

Can you give me a little more information on the following models, i.e., price, condition, Key custom series #, etc. Photos would be nice. Even just the box label; then I could do further research on them.

Key
AC-5 SP Early
AC-6 SP Modern Cab
AC-9 SP #3800 Coal
2-6-6-2 SP
FA1/FB1 UP Alco

Oriental
E-6A UP
E-6B UP

Thanks, and let me know if you have any questions.

Best regards,

Peter


On May 25, 2018, at 11:31 AM, John Claudino <aztecmfg@...> wrote:

Peter,

Did you see anything on my brass list that you are interested in?

John

AZTEC MANUFACTURING CO.
Phone  775-883-3327   •   Fax  775-883-3357
Email  aztecmfg@...   •   Web  www.aztectrains.com 
The world's finest model railroad track cleaners from Z to G 



On May 2, 2018, at 7:01 PM, Peter York via Groups.Io <peterdyork@...> wrote:

My name is Peter York and I live in Dallas, TX. 

I collect brass model trains in all gauges (Gauge 1, O, HO and N). My preference is for articulated steam (all roads), UP diesels and turbines and unique and unusual rolling stock. I currently own approximately 400 models.

My reason for joining this group is I have always wanted my models to be as accurate to scale and prototype as possible, and Sergent couplers are a perfect addition to any of my HO models.

I would be happy to provide references if you need them, as I am personal friends with most importers.

Thank you for your consideration.

Peter York
214-351-1844 (Home)

peterdyork@...




Groups.io Links:

You receive all messages sent to this group.



--

Re: Membership Application

Andrew
 

Actually,

Its going to everyone on the Sergent Engineering groups.io list.  I’m not the moderator, but conducting brass locomotive /equipment sales via the list seems abit off topic (probably unintentionally)

Your individual email addresses appear within this email chain, so I have BCC’d you (this may or may not work).

That all said, I would be interested in having a look at John’s brass list since its been brought up.

Andrew Porter



On Sunday, May 27, 2018, 7:25 AM, Peter Burr <pburr47@...> wrote:

John, for some reason this came to me instead of Peter York. I’m not currently looking for brass.

On Sat, May 26, 2018 at 10:06 PM Peter York via Groups.Io <peterdyork=yahoo.com@groups.io> wrote:
John, sent you this email last night. Guess you didn’t get it. What’s your direct email?

Hi John,

Sorry to be late in responding. We have just begun a major remodel of our house and things have been a little hectic around here.

Can you give me a little more information on the following models, i.e., price, condition, Key custom series #, etc. Photos would be nice. Even just the box label; then I could do further research on them.

Key
AC-5 SP Early
AC-6 SP Modern Cab
AC-9 SP #3800 Coal
2-6-6-2 SP
FA1/FB1 UP Alco

Oriental
E-6A UP
E-6B UP

Thanks, and let me know if you have any questions.

Best regards,

Peter


On May 25, 2018, at 11:31 AM, John Claudino <aztecmfg@...> wrote:

Peter,

Did you see anything on my brass list that you are interested in?

John

AZTEC MANUFACTURING CO.
Phone  775-883-3327   •   Fax  775-883-3357
Email  aztecmfg@...   •   Web  www.aztectrains.com 
The world's finest model railroad track cleaners from Z to G 



On May 2, 2018, at 7:01 PM, Peter York via Groups.Io <peterdyork@...> wrote:

My name is Peter York and I live in Dallas, TX. 

I collect brass model trains in all gauges (Gauge 1, O, HO and N). My preference is for articulated steam (all roads), UP diesels and turbines and unique and unusual rolling stock. I currently own approximately 400 models.

My reason for joining this group is I have always wanted my models to be as accurate to scale and prototype as possible, and Sergent couplers are a perfect addition to any of my HO models.

I would be happy to provide references if you need them, as I am personal friends with most importers.

Thank you for your consideration.

Peter York




Groups.io Links:

You receive all messages sent to this group.



--

Re: Membership Application

Andrew
 

Well,

Thats what I get for replying before coffee.

John and Peter,

Ive Emailed you separately.

Andrew




On Sunday, May 27, 2018, 7:57 AM, ihtsbih_2014 via Groups.Io <ihtsbih_2014@...> wrote:

Actually,

Its going to everyone on the Sergent Engineering groups.io list.  I’m not the moderator, but conducting brass locomotive /equipment sales via the list seems abit off topic (probably unintentionally)

Your individual email addresses appear within this email chain, so I have BCC’d you (this may or may not work).

That all said, I would be interested in having a look at John’s brass list since its been brought up.

Andrew Porter



On Sunday, May 27, 2018, 7:25 AM, Peter Burr <pburr47@...> wrote:

John, for some reason this came to me instead of Peter York. I’m not currently looking for brass.

On Sat, May 26, 2018 at 10:06 PM Peter York via Groups.Io <peterdyork=yahoo.com@groups.io> wrote:
John, sent you this email last night. Guess you didn’t get it. What’s your direct email?

Hi John,

Sorry to be late in responding. We have just begun a major remodel of our house and things have been a little hectic around here.

Can you give me a little more information on the following models, i.e., price, condition, Key custom series #, etc. Photos would be nice. Even just the box label; then I could do further research on them.

Key
AC-5 SP Early
AC-6 SP Modern Cab
AC-9 SP #3800 Coal
2-6-6-2 SP
FA1/FB1 UP Alco

Oriental
E-6A UP
E-6B UP

Thanks, and let me know if you have any questions.

Best regards,

Peter


On May 25, 2018, at 11:31 AM, John Claudino <aztecmfg@...> wrote:

Peter,

Did you see anything on my brass list that you are interested in?

John

AZTEC MANUFACTURING CO.
Phone  775-883-3327   •   Fax  775-883-3357
Email  aztecmfg@...   •   Web  www.aztectrains.com 
The world's finest model railroad track cleaners from Z to G 



On May 2, 2018, at 7:01 PM, Peter York via Groups.Io <peterdyork@...> wrote:

My name is Peter York and I live in Dallas, TX. 

I collect brass model trains in all gauges (Gauge 1, O, HO and N). My preference is for articulated steam (all roads), UP diesels and turbines and unique and unusual rolling stock. I currently own approximately 400 models.

My reason for joining this group is I have always wanted my models to be as accurate to scale and prototype as possible, and Sergent couplers are a perfect addition to any of my HO models.

I would be happy to provide references if you need them, as I am personal friends with most importers.

Thank you for your consideration.

Peter York




Groups.io Links:

You receive all messages sent to this group.



--

Pending member

Vic Lewis
 

I'm a HO Scale models converting to Sergent couplers as i can. 

Great looking couplers! 


Vic Lewis, Proprietor
Bald Clam Car and Locomotive Shop
Florence, SC

membership

Daniel van Aggelen
 

Hello to all of you,

This is my third attempt to contact you. As you can see in the mail address I am living in The Netherlands. The reason I apply is that some years ago I bought EN87A couplers for my On2 Gilpin railroad. I have sold all equipment but removed the couplers. So I had enough for 25 cars. I hoped they would be correct for my On3 South Park railroad around 1885, but they are too small.

Sheldon Schwedler of Coronado Scale models advised the S couplers as being almost correct for the 3/4 size coupler. (I do not like Kadee’s and the new San Juan couplers are too big for my chosen period.) I ordered S couplers for 4 cars; the Smoky Mountain boxes arrived this week. I hope I can start assembly and testing in a few weeks.
I hope to learn from the experience of others about the couplers, especially on eventual troubleshooting. No one over here (also those who model US railroads) uses them or even know of their existence.

Kind regards,

Daniel van Aggelen

Re: membership

Andrew
 

Daniel,

Welcome to the group.  I just visited a great DSP&P layout in On3.  The owner uses Sergent S scale couplers and they looked pretty good to my eye.  

Andrew



On Wednesday, June 20, 2018, 4:01 PM, Daniel van Aggelen <d.van.aggelen@...> wrote:

Hello to all of you,

This is my third attempt to contact you. As you can see in the mail address I am living in The Netherlands. The reason I apply is that some years ago I bought EN87A couplers for my On2 Gilpin railroad. I have sold all equipment but removed the couplers.  So I had enough for 25 cars. I hoped they would be correct for my On3 South Park railroad around 1885, but they are too small.

Sheldon Schwedler of Coronado Scale models advised the S couplers as being almost correct for the 3/4 size coupler. (I do not like Kadee’s and the new San Juan couplers are too big for my chosen period.) I ordered S couplers for 4 cars; the Smoky Mountain boxes arrived this week. I hope I can start assembly and testing in a few weeks.
I hope to learn from the experience of others about the couplers, especially on eventual troubleshooting. No one over here (also those who model US railroads) uses them or even know of their existence.

Kind regards,

Daniel van Aggelen

Re: membership

John Niemeyer
 

Daniel

If you tried to contact us 3 times. We didn't see it. So far I haven't denied anyone for membership. Something fell thru the cracks, because I don't see anything from you previously.

Welcome to the group.

Sorry for the inconvenience.

John Niemeyer
Group owner/Moderator


Hello to all of you,

This is my third attempt to contact you. As you can see in the mail address I am living in The Netherlands. The reason I apply is that some years ago I bought EN87A couplers for my On2 Gilpin railroad. I have sold all equipment but removed the couplers. So I had enough for 25 cars. I hoped they would be correct for my On3 South Park railroad around 1885, but they are too small.

Sheldon Schwedler of Coronado Scale models advised the S couplers as being almost correct for the 3/4 size coupler. (I do not like Kadee’s and the new San Juan couplers are too big for my chosen period.) I ordered S couplers for 4 cars; the Smoky Mountain boxes arrived this week. I hope I can start assembly and testing in a few weeks.
I hope to learn from the experience of others about the couplers, especially on eventual troubleshooting. No one over here (also those who model US railroads) uses them or even know of their existence.

Kind regards,

Daniel van Aggelen

Re: membership

George
 

Not sure who’s layout you visited, but if it was mine, they were HO Sergents. 


On Jun 20, 2018, at 7:37 PM, ihtsbih_2014 via Groups.Io <ihtsbih_2014@...> wrote:

Daniel,

Welcome to the group.  I just visited a great DSP&P layout in On3.  The owner uses Sergent S scale couplers and they looked pretty good to my eye.  

Andrew



On Wednesday, June 20, 2018, 4:01 PM, Daniel van Aggelen <d.van.aggelen@...> wrote:

Hello to all of you,

This is my third attempt to contact you. As you can see in the mail address I am living in The Netherlands. The reason I apply is that some years ago I bought EN87A couplers for my On2 Gilpin railroad. I have sold all equipment but removed the couplers.  So I had enough for 25 cars. I hoped they would be correct for my On3 South Park railroad around 1885, but they are too small.

Sheldon Schwedler of Coronado Scale models advised the S couplers as being almost correct for the 3/4 size coupler. (I do not like Kadee’s and the new San Juan couplers are too big for my chosen period.) I ordered S couplers for 4 cars; the Smoky Mountain boxes arrived this week. I hope I can start assembly and testing in a few weeks.
I hope to learn from the experience of others about the couplers, especially on eventual troubleshooting. No one over here (also those who model US railroads) uses them or even know of their existence.

Kind regards,

Daniel van Aggelen

Re: membership

Andrew
 

George 
Well if your layout was open last Saturday,  then it was yours.  And the couplers looked great to me.

Andrew



On Wednesday, June 20, 2018, 7:51 PM, George <gsebastiancoleman@...> wrote:

Not sure who’s layout you visited, but if it was mine, they were HO Sergents. 


On Jun 20, 2018, at 7:37 PM, ihtsbih_2014 via Groups.Io <ihtsbih_2014@...> wrote:

Daniel,

Welcome to the group.  I just visited a great DSP&P layout in On3.  The owner uses Sergent S scale couplers and they looked pretty good to my eye.  

Andrew



On Wednesday, June 20, 2018, 4:01 PM, Daniel van Aggelen <d.van.aggelen@...> wrote:

Hello to all of you,

This is my third attempt to contact you. As you can see in the mail address I am living in The Netherlands. The reason I apply is that some years ago I bought EN87A couplers for my On2 Gilpin railroad. I have sold all equipment but removed the couplers.  So I had enough for 25 cars. I hoped they would be correct for my On3 South Park railroad around 1885, but they are too small.

Sheldon Schwedler of Coronado Scale models advised the S couplers as being almost correct for the 3/4 size coupler. (I do not like Kadee’s and the new San Juan couplers are too big for my chosen period.) I ordered S couplers for 4 cars; the Smoky Mountain boxes arrived this week. I hope I can start assembly and testing in a few weeks.
I hope to learn from the experience of others about the couplers, especially on eventual troubleshooting. No one over here (also those who model US railroads) uses them or even know of their existence.

Kind regards,

Daniel van Aggelen

Sergent Couplers for sale,

Jason McKee <jasmckee@...>
 

Hi Guys,

Hope this is ok, if there is anyone in New Zealand who would be interested I have my sergent couplers for sale, I have type e, lower shelf, double shelf and tightloks, I am getting out of the hobby as I have no space for a layout, if anyone is interested please email me off list

 

Thanks

Jason

 

From: SergentEngineering@groups.io <SergentEngineering@groups.io> On Behalf Of ihtsbih_2014 via Groups.Io
Sent: Thursday, June 21, 2018 1:47 PM
To: SergentEngineering@groups.io
Subject: Re: [Sergent Engineering] membership

 

George 

Well if your layout was open last Saturday,  then it was yours.  And the couplers looked great to me.

Andrew


On Wednesday, June 20, 2018, 7:51 PM, George <gsebastiancoleman@...> wrote:

Not sure who’s layout you visited, but if it was mine, they were HO Sergents. 


On Jun 20, 2018, at 7:37 PM, ihtsbih_2014 via Groups.Io <ihtsbih_2014@...> wrote:

Daniel,

 

Welcome to the group.  I just visited a great DSP&P layout in On3.  The owner uses Sergent S scale couplers and they looked pretty good to my eye.  

 

Andrew



On Wednesday, June 20, 2018, 4:01 PM, Daniel van Aggelen <d.van.aggelen@...> wrote:

Hello to all of you,

 

This is my third attempt to contact you. As you can see in the mail address I am living in The Netherlands. The reason I apply is that some years ago I bought EN87A couplers for my On2 Gilpin railroad. I have sold all equipment but removed the couplers.  So I had enough for 25 cars. I hoped they would be correct for my On3 South Park railroad around 1885, but they are too small.

 

Sheldon Schwedler of Coronado Scale models advised the S couplers as being almost correct for the 3/4 size coupler. (I do not like Kadee’s and the new San Juan couplers are too big for my chosen period.) I ordered S couplers for 4 cars; the Smoky Mountain boxes arrived this week. I hope I can start assembly and testing in a few weeks.

I hope to learn from the experience of others about the couplers, especially on eventual troubleshooting. No one over here (also those who model US railroads) uses them or even know of their existence.

 

Kind regards,

 

Daniel van Aggelen

 

Re: membership

George
 

That was mine. Thanks. 


On Jun 20, 2018, at 9:47 PM, ihtsbih_2014 via Groups.Io <ihtsbih_2014@...> wrote:

George 
Well if your layout was open last Saturday,  then it was yours.  And the couplers looked great to me.

Andrew



On Wednesday, June 20, 2018, 7:51 PM, George <gsebastiancoleman@...> wrote:

Not sure who’s layout you visited, but if it was mine, they were HO Sergents. 


On Jun 20, 2018, at 7:37 PM, ihtsbih_2014 via Groups.Io <ihtsbih_2014@...> wrote:

Daniel,

Welcome to the group.  I just visited a great DSP&P layout in On3.  The owner uses Sergent S scale couplers and they looked pretty good to my eye.  

Andrew



On Wednesday, June 20, 2018, 4:01 PM, Daniel van Aggelen <d.van.aggelen@...> wrote:

Hello to all of you,

This is my third attempt to contact you. As you can see in the mail address I am living in The Netherlands. The reason I apply is that some years ago I bought EN87A couplers for my On2 Gilpin railroad. I have sold all equipment but removed the couplers.  So I had enough for 25 cars. I hoped they would be correct for my On3 South Park railroad around 1885, but they are too small.

Sheldon Schwedler of Coronado Scale models advised the S couplers as being almost correct for the 3/4 size coupler. (I do not like Kadee’s and the new San Juan couplers are too big for my chosen period.) I ordered S couplers for 4 cars; the Smoky Mountain boxes arrived this week. I hope I can start assembly and testing in a few weeks.
I hope to learn from the experience of others about the couplers, especially on eventual troubleshooting. No one over here (also those who model US railroads) uses them or even know of their existence.

Kind regards,

Daniel van Aggelen

Sergent Engineering Couplers

Robert J. Amsler, Jr.
 

I model in HO and I just bought some couplers.  I am interested in the future of the couplers now that I know Frank intends to stop producing them.

 

Robert J. Amsler, Jr.

514 Dover Place

Saint Louis, Missouri 63111

(314) 606-6118  (Telephone)

(314) 754-2688  (Facsimile)

ramsler@...

 

 

Re: Sergent Engineering Couplers

Nathan Rich
 

Frank is stopping production? I haven't read anything that suggests that. Source please?

Nathan Rich

On Sat, Jul 7, 2018 at 2:18 PM, Robert J. Amsler, Jr. <mpfan1@...> wrote:

I model in HO and I just bought some couplers.  I am interested in the future of the couplers now that I know Frank intends to stop producing them.

 

Robert J. Amsler, Jr.

514 Dover Place

Saint Louis, Missouri 63111

(314) 606-6118  (Telephone)

(314) 754-2688  (Facsimile)

ramsler@...

 

 


Re: Sergent Engineering Couplers

Alan Hummel
 

Frank is looking to have someone buy him out,or using his drawings,make couplers like his to my understanding. He's not pulling out,but is looking to leave the coupler business but wants to see his couplers fall into a new manufacturer's hands so his coupler line continues into the future. 

I admit having thoughts of how long his coupler line will remain available,myself. What's REALLY concerning me,is noone has seemingly shown much interest in the project. These couplers are a milestone to HO Scale. The next thing that's on the way are Prototypical working ground throw switchstands with targets from ALL ABOARD TRAINS. These are a ways off as the 1st 'stands are being made in O Scale 1st,but the company's owner hopes to make an HO Model in the future.

Alan Hummel