Date   

Re: HOn3 Sharon coupler box w/centering spring action

Mark Lewis
 

Dale:

I am interested. Waiting for updates and ordering info.

Mark Lewis
Stony Point, NC


Re: HOn3 Sharon coupler box w/centering spring action

Rick Rhode
 

I'm in.  Keep us posted.
                                       Rick Rhode


Re: HOn3 Sharon coupler box w/centering spring action

Mike Conder
 

I'm interested.

Mike Conder

On Fri, Mar 23, 2018, 3:53 PM Dale Buxton <dbtuathaddana@...> wrote:
Ok gang, I have redesigned my Sharon coupler box and tested it extensively. I will post pictures later today. If there is interest in these I will sell them through the the Shapeways store program.

Dale Buxton 


Re: HOn3 Sharon coupler box w/centering spring action

Dale Buxton <dbtuathaddana@...>
 

Ok gang, I have redesigned my Sharon coupler box and tested it extensively. I will post pictures later today. If there is interest in these I will sell them through the the Shapeways store program.

Dale Buxton 


Re: Casting problem?

Ryan Harris
 

Ok, well at least it's not a problem. I filled the holes with some thick gel type CA and allowed them to dry before assembly, so no problem. I'm just glad I identified them before they presented a problem for me.

While I have your attention, the main question was when will you restock the SF couplers? I need three pair now, but I could probably use six pair in the future since those 70s tank cars are in my wheelhouse.

Is the email thing a matter of your host blocking them or is it my provider? I sent one using a gmail address, the other using my sbcglobal address.
--
Ryan Harris
Fort Worth TX


Re: Casting problem?

Frank Sergent
 

Hi Ryan and all,
 
The hole in the back of the investment cast couplers has been there for a about 2 years now. Its not in the diecast couplers. The function of the hole is to improve casting yield by letting air escape during the investing process. Feel free to plug the hole during the assembly process if the coupler will be installed in a way that allows the back surface to be viewed (flat cars and such).
 
Sorry your previous emails went unanswered – I never got them unfortunately.
 
Frank
 

Sent: Thursday, March 22, 2018 3:51 PM
Subject: [Sergent Engineering] Casting problem?
 
I am assembling some packages of couplers today - EC87P100K, EC87M040K and SEC87K - and all of them seem to have the same problem. There is a hole in the back of the coupler horn leading to the void for the locking ball. I am afraid that unless the hole is plugged, paint or glue could end up getting through the hole to the locking ball rendering the coupler inoperable.

I don't believe this hole has always been there. I usually clean and assemble the couplers using magnification and lots of light, so I think I'd have seen light passing through the coupler during the assembly before if this was common to my previous orders. Or maybe I just missed it.

Has anyone else noticed the hole in their couplers? Has it presented a problem allowing paint or glue to get inside the coupler?

I'm posting this here since both of my emails from two different accounts to Sergent have gone unanswered. I understand there's a past issue with spam filtering, but I can't get through to Sergent any other way.
--
Ryan Harris
Fort Worth TX


Casting problem?

Ryan Harris
 

I am assembling some packages of couplers today - EC87P100K, EC87M040K and SEC87K - and all of them seem to have the same problem. There is a hole in the back of the coupler horn leading to the void for the locking ball. I am afraid that unless the hole is plugged, paint or glue could end up getting through the hole to the locking ball rendering the coupler inoperable. 

I don't believe this hole has always been there. I usually clean and assemble the couplers using magnification and lots of light, so I think I'd have seen light passing through the coupler during the assembly before if this was common to my previous orders. Or maybe I just missed it.

Has anyone else noticed the hole in their couplers? Has it presented a problem allowing paint or glue to get inside the coupler?

I'm posting this here since both of my emails from two different accounts to Sergent have gone unanswered. I understand there's a past issue with spam filtering, but I can't get through to Sergent any other way.
--
Ryan Harris
Fort Worth TX


critters

Robert Margerum
 

has anyone had experience with or used a powered truck called a critter.they are from japan from a company called flying zoo. I picked up a couple of nos ones for ho at a train show.


Re: Rotary couplers

Frank Sergent
 

Maybe. You are welcome to try...
 

From: Jim King
Sent: Tuesday, February 27, 2018 10:56 AM
Subject: Re: [Sergent Engineering] Rotary couplers
 

Frank … can these be cast in urethane?

 

Jim King

www.smokymountainmodelworks.com

 


--
Jim King
www.smokymountainmodelworks.com


Re: Rotary couplers

Jim King
 

Frank … can these be cast in urethane?

 

Jim King

www.smokymountainmodelworks.com

 


--
Jim King
www.smokymountainmodelworks.com


Re: Rotary couplers

Ryan Harris
 

I'm sorry to hear the dummy couplers will be going away. I like to use them on my unit trains. I still need a few dozen of them. Hopefully they will be available long enough for me to get them.

I used to use Walthers dummy couplers but they cannot couple to Sergent couplers without modification. 


Re: Rotary couplers

Nathan Rich <thaddeusthudpucker@...>
 

The dummy couplers are great for say between A and B units of a permanent set. I have a set of Alco FA's with an FB and it is very happy with dummy couplers between them. Also keeps people from breaking the set.

Nathan Rich 

On Feb 24, 2018 12:18, "Frank Sergent" <fsergent@...> wrote:
Hi all,
 
Unfortunately, Frank Glatlz no longer makes the rotary couplers that we sold for a few years. Volume was pretty low on those and continuing to offer those just can’t be financially justified. His dummy couplers will be gone when I run out as well, but I still have a decent stock level of the dummy couplers.
 
Frank
 
Sent: Tuesday, February 20, 2018 10:38 PM
Subject: Re: [Sergent Engineering] Becoming a member of Sergent Engineer IO Group
 
Bob, see entry 1477 on this list. It's a comment on the rotary couplers. He may have answers to your ?????


Re: The ball will not drop!

David <scott.d100@...>
 

Graphite in the ball pocket will definitely cause the ball to stick in the pocket. Ask me how I know...

Whether there is any apparent flash or not, burnishing the ball pocket with a toothpick is part of my normal assembly routine.

I rub the inside face of the coupler and the face of the knuckle with an HB pencil lead. I don't use any powdered graphite products as they all seemed to reduce the reliability of the coupler operation.

Like Darren I'm accounting for the use of Sergents in my layout design.

David


Re: Rotary couplers

Frank Sergent
 

Hi all,
 
Unfortunately, Frank Glatlz no longer makes the rotary couplers that we sold for a few years. Volume was pretty low on those and continuing to offer those just can’t be financially justified. His dummy couplers will be gone when I run out as well, but I still have a decent stock level of the dummy couplers.
 
Frank
 

Sent: Tuesday, February 20, 2018 10:38 PM
Subject: Re: [Sergent Engineering] Becoming a member of Sergent Engineer IO Group
 
Bob, see entry 1477 on this list. It's a comment on the rotary couplers. He may have answers to your ?????


Re: Contact with Sergent Engineering

Frank Sergent
 

Hi all,
 
A few years back, some nice person sent out a few million spam emails spoofing an email address from the sergentengineering.com domain. Those emails didn’t really come from me or even my email server, so there was nothing I could really do to prevent it. Unfortunately as a result, the sergentengineering.com domain was marked by some internet service providers as bad. The nice person that started this eventually quit, but the damage was done. As a result, even now some of my inquiry replies never make it back to their destination. This is not to say that I am always as prompt as I should be in responding (because I’m not), but I generally do respond. I do monitor this list, so if you haven’t received a response from me in a reasonable period of time and you don’t mind sharing your inquiry with the world, you can post it here.
 
I’ll answer the question about rotary couplers in a separate post.
 
Frank
 

From: Mark Lewis
Sent: Tuesday, February 20, 2018 10:28 PM
Subject: Re: [Sergent Engineering] Contact with Sergent Engineering
 
Bob:

The only email address I have for Frank is:     Sales@...  
This is directly off a packing list I received with an order.

Mark Lewis
Stony Point, NC


Detailed coupler boxes from Smoky Mtn Model Works (reminder)

Jim King
 

SMMW’s recently-released coupler boxes have been well-received so I thought a quick reminder is appropriate to reach those who may not know about ‘em.  Visit my web page for more info, then contact me off-list to place an order.  All coupler styles and colors are in-stock.  I do not have a “shopping cart” option … just send a short email with the part numbers you want, I’ll reply with an invoice and you send payment.  Pretty simple.

 

http://www.smokymountainmodelworks.com/HO_draft_gear+cplrs.html

 

Jim King

www.smokymountainmodelworks.com

 


--
Jim King
www.smokymountainmodelworks.com


Re: Becoming a member of Sergent Engineer IO Group

Ed Tibbetts <tippytib@...>
 

Bob, see entry 1477 on this list. It's a comment on the rotary couplers. He may have answers to your ?????


Re: Becoming a member of Sergent Engineer IO Group

Ed Tibbetts <tippytib@...>
 

I sent an email to    info   at   sergentIengeniering   dot   com and got a timely and informative reply from Frank Sergent the next day.


Re: Contact with Sergent Engineering

Mark Lewis
 

Bob:

The only email address I have for Frank is:     Sales@...  
This is directly off a packing list I received with an order.

Mark Lewis
Stony Point, NC


Becoming a member of Sergent Engineer IO Group

Bob Stuff
 

Hi

 

I’ve recently learned of Sergent’s existence and have been trying to reach the company for more details.  Lacking an email reply to the website address I used, I began to look around to see if there was any online info/chatter, and found this website.  I’ve been modeling in HO for a number of years, and have now built most of my layout.   One items of interest has been a rotary dumper, hence the interest in rotary couplers which is what lead me to Sergent and now this group site.  Hopefully I can learn and then share some of my experiences.

 

 

B

 

 

 

1181 - 1200 of 2722