1:8 H Couplers

Nathan Rich

Thought you guys might enjoy this, I upscaled the H coupler to 1:8 scale, for 7 1/2" gauge. I wanted to test the theory, because I wanted to use a correct H coupler on the front of a PA locomotive a friend is  building.

I upscaled the files Mr. Sergent graciously provided us by 1087.5%, and printed then in PLA with 20% infill. I do not expect these to be actually used, I wanted to make sure they would mate with commercially available couplers (Shown here a Live Steam Products standard E coupler). This just proves how accurate the couplers Mr. Sergent made are. I'm certainly impressed.

For the ball, I used a 1/2" steel bearing, and the holes you can see are for using a Sergent pick to uncouple just like the HO version. With a little tweaking with a drill here and there, these things work great. They couple reliably every time! 

For the one to go on the actual locomotive, I'll need to 3D print it at 100% infill or figure out a way to cast it in aluminum or brass, and possibly use a different mechanism for the knuckle. It needs to be able to be used in an unusual circumstance, but normally it should be on the front looking cool.

Nathan Rich

Join SergentEngineering@groups.io to automatically receive all group messages.