Re: Membership

Andrew
 

 Nick,

I use a magnetized set of tweezers to pick up the spring.  I insert the tweezers inside the circular end of the spring then slide the spring against the mounting post in the coupler box.  I use a toothpick  or the wooden dowel that comes with the starter pack to slide the spring off the tweezers and push it down level. 

I only use a spring if the coupler feels loose in its side to side motion.

Ive had about a 90% success rate with this method.   YMMV.

Andrew

Join SergentEngineering@groups.io to automatically receive all group messages.