|
FTP server attack
6 messages
Hi Ted These DoS attacks and Portscanners are becoming a major problem, i turned off my Savant server which hosted the Windows Winfbb Bulletin webpage CGI it what the port scanners seemed to be lookin
Hi Ted These DoS attacks and Portscanners are becoming a major problem, i turned off my Savant server which hosted the Windows Winfbb Bulletin webpage CGI it what the port scanners seemed to be lookin
|
By
Ken G7VJA
·
|
|
FTP server attacks
Hi all, There have been a number of attacks on my FTP server recently. Most are automated "port scanning" type attacks, sending random "pot-luck" commands that get nowhere. These sort of attacks are n
Hi all, There have been a number of attacks on my FTP server recently. Most are automated "port scanning" type attacks, sending random "pot-luck" commands that get nowhere. These sort of attacks are n
|
By
Ted
·
|
|
Missing connection script
4 messages
Hello, i just installed an configured sally for a telnet connection to my bbs and i get the error "missing connection script: IR2UFV.con" In script editor i have this config with the name IR2UFV: ; Si
Hello, i just installed an configured sally for a telnet connection to my bbs and i get the error "missing connection script: IR2UFV.con" In script editor i have this config with the name IR2UFV: ; Si
|
By
fermin venegas
·
|
|
Sally and Hardware TNC
8 messages
Hello, A few local hams and I are looking for a packet radio program similar to the old WinPack software. We are looking for a program that will be more pleasing to use than Putty, Allow keyboard to k
Hello, A few local hams and I are looking for a packet radio program similar to the old WinPack software. We are looking for a program that will be more pleasing to use than Putty, Allow keyboard to k
|
By
N8OFP.DL@...
·
|
|
Install Failure
3 messages
Good morning. This is what I get when installing the latest version of Sally from the files section. Thanks, Dan KM6CQ
Good morning. This is what I get when installing the latest version of Sally from the files section. Thanks, Dan KM6CQ
|
By
Dan Baker
·
|
|
Problem installing new version of Sally
12 messages
Hello, I tried to install Sally7 the latest version, but when I try to start it I get the error that SalLib32.dll can not be found. After trying to re-install Sally7 again I gave up after getting the
Hello, I tried to install Sally7 the latest version, but when I try to start it I get the error that SalLib32.dll can not be found. After trying to re-install Sally7 again I gave up after getting the
|
By
Henk F.P. Pit
·
|
|
Nuovo entrato - new entry
Sono Luigi i3xty in JN65BQ (nella Citta’ di Paese regione Veneto-Italia). Non so se ho fatto tutto esatto nell’iscrizione al Gruppo che sostiene l’ottimo SO Sally, spero di si e sapete la difficolta’
Sono Luigi i3xty in JN65BQ (nella Citta’ di Paese regione Veneto-Italia). Non so se ho fatto tutto esatto nell’iscrizione al Gruppo che sostiene l’ottimo SO Sally, spero di si e sapete la difficolta’
|
By
i3xty
·
|
|
Delivery Status Notification (Failure)
YES, we use Sally's dayly.. for many years... Excellent software.. Virgilio/hp2vx ---------- Forwarded message --------- De: Mail Delivery Subsystem <mailer-daemon@...> Date: lun., 22 de agosto de 202
YES, we use Sally's dayly.. for many years... Excellent software.. Virgilio/hp2vx ---------- Forwarded message --------- De: Mail Delivery Subsystem <mailer-daemon@...> Date: lun., 22 de agosto de 202
|
By
Virgilio Castillo
·
|
|
deleted poll
Hi Ted I still use it on a daily basis though in my part of Essex no RF BBs so have to use the internet. Regards Richard G7OED
Hi Ted I still use it on a daily basis though in my part of Essex no RF BBs so have to use the internet. Regards Richard G7OED
|
By
Richard
·
|
|
Lost database
4 messages
Hi All Had a short power cut here, due to a small storm passing overhead when i rebooted the Sally7 PC and tried to start Sally7 i got this error, and Sally7 would not start, So i reinstalled v58 and
Hi All Had a short power cut here, due to a small storm passing overhead when i rebooted the Sally7 PC and tried to start Sally7 i got this error, and Sally7 would not start, So i reinstalled v58 and
|
By
Ken G7VJA
·
|
|
Failure to install version 7.2.058
10 messages
Hi All Just tried to update Sally 7 and all went OK until it tried to install it. I got the following error as shown in the attached picture. The program is istalled on drive E:/HamRadio/Sally7 on Win
Hi All Just tried to update Sally 7 and all went OK until it tried to install it. I got the following error as shown in the attached picture. The program is istalled on drive E:/HamRadio/Sally7 on Win
|
By
Keith
·
|
|
7plus - msgs not sent
11 messages
Hi all, sending 7plus files would have seemed to be straightforward in Sally7. However, I have noticed 7+ generated msgs do not get sent anywhere absolutely anywhere. They also bear an @LOCAL. I must
Hi all, sending 7plus files would have seemed to be straightforward in Sally7. However, I have noticed 7+ generated msgs do not get sent anywhere absolutely anywhere. They also bear an @LOCAL. I must
|
By
Julian
·
|
|
bbs script
4 messages
Hi All Been toying with the Bpq maill again, Has anyone got a working Sally7 .con that will work with a BPQ bbs or even a Winpack script that will work. regards Ken G7VJA GB7COW
Hi All Been toying with the Bpq maill again, Has anyone got a working Sally7 .con that will work with a BPQ bbs or even a Winpack script that will work. regards Ken G7VJA GB7COW
|
By
Ken G7VJA
·
|
|
System error
3 messages
Hi All After a reboot Sally 7.2.055 is giving me the following error every 5 minutes "DAO.Recordset.7.2.055 Globals Code 11850 DLL 0 Stack 3 Console2 - tmrConsole_Timer XC 6 Console2 - Form_Unload Glo
Hi All After a reboot Sally 7.2.055 is giving me the following error every 5 minutes "DAO.Recordset.7.2.055 Globals Code 11850 DLL 0 Stack 3 Console2 - tmrConsole_Timer XC 6 Console2 - Form_Unload Glo
|
By
Keith
·
|
|
Message retrieval from BPQ
10 messages
Hello all, I'm brand new to this software and am trying to set it up as a PMS to retrieve messages from and forward messages to a LinBPQ BBS. I have a telnet script working in terms of connecting to t
Hello all, I'm brand new to this software and am trying to set it up as a PMS to retrieve messages from and forward messages to a LinBPQ BBS. I have a telnet script working in terms of connecting to t
|
By
Lee Bengston
·
|
|
Line when forwarding messages [SOLVED]
Ok, I've only updated IZ5FSA station forwarding setup in BPQ, restarted BPQ and now it works. Accessin through telnet (tpc port no fbb port) and it act as a normal user downloading messages as declare
Ok, I've only updated IZ5FSA station forwarding setup in BPQ, restarted BPQ and now it works. Accessin through telnet (tpc port no fbb port) and it act as a normal user downloading messages as declare
|
By
IZ5FSA Leo
·
|
|
Line when forwarding messages
12 messages
Hello, all... I finally managed to get Sally7 to connect to my LinBPQ BBS via telnet (Sally7 and BPQ are on separate computers) Everything works fine and I can forward/reverse forward between them ...
Hello, all... I finally managed to get Sally7 to connect to my LinBPQ BBS via telnet (Sally7 and BPQ are on separate computers) Everything works fine and I can forward/reverse forward between them ...
|
By
Aly B. (callsign: AL0Y)
·
|
|
Sall7 7.2.055 error
8 messages
Hi Ted and all. I have recently updated to the latest version. The following error popped up: Sally.7.2.055 MhList Code 10036 DLL 0 Stack 3 MDI base - tmrMdi_Timer MDI base - HousekeepingRun MhList -
Hi Ted and all. I have recently updated to the latest version. The following error popped up: Sally.7.2.055 MhList Code 10036 DLL 0 Stack 3 MDI base - tmrMdi_Timer MDI base - HousekeepingRun MhList -
|
By
Julian
·
|
|
Unproto sync request
6 messages
Hi Everyone, I just started playing with Sally, most of it seems to work except the unproto sync request. In the log I can see that several unproto sync requests are send, but I don't see them on my c
Hi Everyone, I just started playing with Sally, most of it seems to work except the unproto sync request. In the log I can see that several unproto sync requests are send, but I don't see them on my c
|
By
Alexander
·
|
|
File /Sally 7.2.054 installer.exe uploaded
#file-notice
The following files have been uploaded to the Files area of the Sally7@groups.io group. /Sally 7.2.054 installer.exe By: Ted <sally7group@...> Description: Sally 7.2.054 installer
The following files have been uploaded to the Files area of the Sally7@groups.io group. /Sally 7.2.054 installer.exe By: Ted <sally7group@...> Description: Sally 7.2.054 installer
|
By
Sally7@groups.io Notification
·
|