Ken Nichols

If I remember correctly on the hygain rotor it has dedicated wires for the resistor (pot) that indicates position. I would double check the wiring is good at and from both ends. When in doubt pick a different pair and swap them entirely with the pot wire pair. Then does anything work differently?

Ken Nichols

On Aug 2, 2019, at 5:23 PM, Michael Goins, k5wmg <wmgoins@...> wrote:

Installing a new rotor and the brake works, turns CCW and CW, but no meter indication. Any troubleshooting ideas will help. Hygain IV. 

Join to automatically receive all group messages.