I have the original MFJ-1234 running 5 feet away from the radio connected via USB and WiFi. The antenna is an endfed 40-20-10m with a 9:1 transformer connected to a Common Mode Filter Choke / Noise Su

Wondering if there is a solution to remove white noise from RigPi / Mumble Audio. With IC-7300 into a dummy load (no signals present) significant amount of white noise at the remote end using Macbook

Need info on what Rotator, Brand/Model Number that works with Rigpi with version 2 Software.

Gosund Smart Power Strip Work with Alexa Google Home, Smart Plug Mini WiFi Outlets Surge Protector with 3 USB 3 Charging Port for Cruise Ship Travel Multi Plug Extender,10A https://smile.amazon.com/dp

I finally upgraded to v2 and also hooked my 7300 up for the first time. Works fine with RigPi but I cannot get Flrig to connect using the same settings - USB Silicone Labs 7300 port at 115200 baud wit

I have been trying for months to make my KENWOOD TS 2000 work digital mode with my MFJ 1234 and have had no success. I am copying Fldigi but have no clue about transmitting with this set up. I bought

I am “trying” to set up a new RigPi for our radio club. I purchased the RigPi 2.0 update but the update process is confusing (to me) It appears rather daunting so I am looking for any resources to mak

Dear all have just acquired an mfj1234 and possess a icom 7100 rig Have managed to connect and sync the icom with my ipad and all devices but the audio doesn’t seem to function also was trying FT8 and

Finally Hamlib 4.0 stable version was released some days ago. To download and compile this version follow my guide here https://www.pianetaradio.it/blog/hamlib/ Best 73 and end of the year Johnny iz8e

The mic gain is not available on an iPhone 10S when connected via the browser. -- 73 Don W6CZ DM07bk

I have an IC-7100 connected to a RigPi2 with the USB cable. I can connect to the mumble server from a remote computer but have no TX or RX audio. The Audio input and output tabs in the mumble setup sc

I don’t understand why the split function don’t work with my Icom IC7100 ?For info this function is ok on Flrig that suppose the issue don’t provide of the tx. Thanks F6fjh

Just upgraded to RSS Ver 2 and now when I connect to my Icom 746PRO, the radio jumps back and forth between main and sub band frequency. It never did this with version 1.05. What could be wrong?

Got most of the RSS working with my 756PRO but need help with Tune command to activate the Icom AH4 remote tuner, I have tried several commands but no response at the radio.

My RigPi stopped booting up and is stalled with my connected monitor showing a black screen with 4 raspberries along the top left and a long script ending in [end kernel panic - not syncing: VFS: Unab

I was working with Rick, W0RDO, when we discovered that his remote (laptop) Mumble client was set to Configure/Settings/Audio Input/Transmission/Transmit to "Continuous" and no audio was being sent fr

My wife surprised me with an early Christmas gift. A new MFJ-1234B Rigpi. I'm going to set it up very soon and I have a question. I'm already set up for RTTY, PSK31, Olivia and other digital mode oper

Everything working on the RigPi except when I transmit via Audio or Keyer, ZERO output power. My rig DOES goes into TX mode just fine and the Sidetone works perfectly on CW. Tried moving the jumpers t

Hello from Germany I am looking for a drilling template for a RigPi case for my Raspberry Pi 4. and both additional boards. tnx for your time and help 73 Peter DH4JQ

Photo attached of the blurry image below. Thanks 73 Jim W7RY On 12/22/2020 7:19 PM, Jim W7RY via groups.io wrote: Nothing found with a search about non managed-vs managed switches. But here is some in