I am building a RigPi using a RPi4. I have the MFJ-1234B chassis. I am using the MFJ keyer hat and MFJ audio hat (whenever they get one to ship me). Has anyone build one using a RPi4 and how did you c

Hi all. For those using the RigPi with a FTDX101: is it possible for the RigPi to bring the 101 out of standby or does the 101 need to be left ON? There is a Yaesu 101 CAT command PS (Power Switch) th

I’m missing something so simple… I am able to transmit CW via the RigPi Keyer but ONLY if I put my Kenwood TS-570 in FSK, AM, or FM modes. When I put it in CW mode, will not modulate (albeit, PTT does

Hi All, Has anyone had any success in turning the output power down or up remotely using the RigPi? I have tried to get it working but not had any success. Any help or suggestions would be appreciated

Mumble Server not receiving audio from any device. Sending but not receiving. Reloaded Rigpi server and still mumble receives no audio. All devices connected receive audio from RigPi mumble server but

I started with a RigPi in October 2020. While I liked the system and learned I had no Smeter and Transmit Audio had dropouts to where it was unusable. So I upgraded to RigPi2 software. This fixed the

Hello group. I just purchased the Rigpi2 image and I was looking for the manual? In particular I am looking on info on how to do the camera and remote GPIO switching etc. I wish they would just includ

I just posted macros for Rig π ver 1.5 and rig π ver 2.0. The version 1.5 is a word document. The ver 2 are exported macro files that version 2.0 generated. They are in the folder ftdx 3000 macros und

Fixed the subject line. Thanks 73 Jim W7RY On 1/4/2021 10:57 AM, Jim W7RY via groups.io wrote: Oh I know... Tube type transmitters are NEVER run remotely without someone present. (Except for the thous

radiorusso added folder /Rig Configuration Information/Yaesu/Ft dx 3000 Macros Rig π ver 1 and Rig π Ver 2 The following files have been uploaded to the Files area of the RigPi@groups.io group. /Rig C

what is flashing on the tuner screen nest to the mode label. It says RPRT-5 next to the mode label every 5 -10 seconds. It is there very briefly What does it mean ? Also does anyone know how to increa

I get a VIRUS warning from this link

Has anyone put together the steps and settings yet for an FTDX3000? I have seen a lot of tidbits of information, but I do not seem to find anything that would help someone start from the beginning to

I have the original MFJ-1234 running 5 feet away from the radio connected via USB and WiFi. The antenna is an endfed 40-20-10m with a 9:1 transformer connected to a Common Mode Filter Choke / Noise Su

Wondering if there is a solution to remove white noise from RigPi / Mumble Audio. With IC-7300 into a dummy load (no signals present) significant amount of white noise at the remote end using Macbook

Need info on what Rotator, Brand/Model Number that works with Rigpi with version 2 Software.

Gosund Smart Power Strip Work with Alexa Google Home, Smart Plug Mini WiFi Outlets Surge Protector with 3 USB 3 Charging Port for Cruise Ship Travel Multi Plug Extender,10A https://smile.amazon.com/dp

I finally upgraded to v2 and also hooked my 7300 up for the first time. Works fine with RigPi but I cannot get Flrig to connect using the same settings - USB Silicone Labs 7300 port at 115200 baud wit

I have been trying for months to make my KENWOOD TS 2000 work digital mode with my MFJ 1234 and have had no success. I am copying Fldigi but have no clue about transmitting with this set up. I bought

I am “trying” to set up a new RigPi for our radio club. I purchased the RigPi 2.0 update but the update process is confusing (to me) It appears rather daunting so I am looking for any resources to mak