Hi all, I'm able to install Mumble version 1.4.0 (the latest availables in the github repository) on my RPi. Let me check in the weekend if it's working well and I will share the procedure. 73 Johnny

Tried to control my xiegu G90 via my Rigpi. Have tested different Icom models and it seems to work well, but have a problem that I have not solved. How to change the mode between LSB, USB, etc. The bu

I have been running the new RigPi Version 2 software on a Raspberry Pi 4. Rig is an FT-991. The S-Meter works much better with the FT-991 (good fix). Something kind of minor I have noticed is that whe

I have a Yaesu FT-991 hooked to my RigPi2 and noticed that the “Bands” display does not show the 70cm band. Is it possible to add that band to the band cluster or do I have to kluge it with a Macro bu

Hallo, I am the new owner of a Rigpi. I can find information on the #Yesu #FT818 in the WIKI. However, this transceiver model does not appear in the selection list of the software. Is there a software

What's the process to get the rigpi2 image for us that we bought the 1234 after April 2020? I've looked at the MFJ website and there is no option for getting the newer with a reduced price. any advice

I recently demonstrated my RigPi, which connects to a Yaesu FT-991 via USB for audio and CAT, to another ham. He was quite interested in the RigPi, but runs a Yaesu FTDX-1200. Anybody out there have a

Hello, I am receiving this pop-up whenever I start wsjt-x on the RigPi desktop: Error Scanning ADIF Log Invalid ADIF Header Anybody run into this or know what I need to do to clear the error? Dan N1DH

Hello everyone, I am looking for a signal description for the MFJ-5706MD cable, or maybe someone has a RigPi jumper board diagram? I need this to use the MFJ-1234 with my FT-891 Wojtek

Hi all I have finally got my Yaesu FTDX 5000 connected, I have the Yaesu SCU 17 between the Rigpi and radio and the cat control side works fine. We have been unable to get any sound tx or rx. I wonder

For a long time now I have been puzzled by not being able to see Howard’s replies to everyone’s queries. Yesterday I looked in Spam (which I never usually do) and found the missing replies there. Why?

After 20 years developing and supporting CommCat and 10 years for CommCat Mobile, I've decided to pull the plug on both. If you have installed CommCat Mobile you can continue to use it with RigPi, but

I've been working for a while to find the combination of equipment and software that would produce the remote experience I was imagining without putting out the big dollars on a Flex. I'm getting clos

Is there a guide or reference docs for writing macros. In particular I would like to see what I can do around control of DSTAR stuff on my 7100, changing to memory mode, and selecting a specific memor

Howard/all, can anyone advise the best approach or reference a website on how to get the Murmur server to autostart on the Pi? I am playing with the code a little bit and want to understand this impor

THESE WORK ON MY IC-7610. HOPE THEY WORK ON OTHER ICOMS TOO. For adjusting the brightness levels of the rigs waterfall without lowering/raising the signal: REFERENCE LEVEL -0 db *1w \0xFE\0xFE\0x98\0x

Hi all I am still trying to sort the transmit audio on my Yaesu FTDX 5000, can anyone tell me if it would work using the tigertronics SL- CAB8R cable and plugging into the SCU 17 and microphone socket

I noticed that RIG π VER 2 seems to change my mic gain on its own. If it is set to 10 on the slider the mic gain is set to 30 on the radio. I usually run the radio mic gain around 14 to keep from over

I would like to remotely control my old (SB-200) linear amplifier power on/off. At the top of page 148 in the V2 RigPi User Manual (Help menu/RigPi Help on the browser tuner page) it shows a most intr

Thanks to Harold W5ZZT for spending a couple of hours on the phone to help me work thru my settings. I had receive audio but no transmit......I now have transmit audio on my MFJ-1234. All functions of