With RSS2 and the ability to view the rig with a camera it would be useful to be able to change the display.. i.e.... SCOPE AUDIO METER and change the bar meter from SWR ALC POWER etc. As I don't see

Morning OMs: I have JS8Call working great with the RigPi 2 software. Only one problem: I cannot log a contact. I THINK (but obviously do not) have everything set up in the reporting tab of JS8Call (my

Howard... Would it be possible to insert camera video into the knob space as an additional choice in a future RSS2 update? On a tablet or laptop I find the knob less useful than the freq or S mtr. ...

I am still in the early stages of setup, but I do have control of my Yaesu FT-891. I noticed the Mode indicator keeps toggling between what ever Mode I have selected and RPRT -8. Anybody know what thi

What do you do when writing a macro that has two sub commands. I.e. Cmd Sub cmd Data 1A 05 0513 00/01 So the string is.... *1w /0xFE/0xFE/0x94/0xE0/0x?? /0x01/0xFD I know the / are wrong can't make th

Just joined the group thanks… Question.. CW keying can be done with a winkeyer USB plugged into the Pi? So if yes, then I should be able to also use a MORTTY FSK for FSK keying? ( https://hamprojects.

Can I plug my IC7610 or TS-890S (which both have a USB sound codec built in) directly into the RigPi without using another interface, and configure it for transmit and receive audio? Thanks -- Thanks

I am Not using the Audio or Keyer Boards. Is there a way of removing the software for them? What I mean is removing the parts that use the GPIO pins. My case's fan software is in conflict with them an

Hiya, I have a pi4 with the new RigPi 2.0, soundcard and keyer modules installed and using my IC-7300 No issues with using FT8, and with mumble on I get audio out, if I key up the PTT on the RSS app i

Howard.. If you update rigpi2 please consider locking the sliders..perhaps with the existing knob lock command. Tnx

I have a first generation RigPi running version 2.0 Problem: Rotor Control is defined as M2 RC2800, bought a new RS232 to USB cable with FTDI chip set When telling the rotor to go to 86 degrees, the c

To All.. I am new to the group.. I am considering a purchase of the MFJ rigpi unit... I want to use it remotely via a Windows machine.. I dont see any software listed to do that,, All I see is mobile

When I boot up RigPi 2, this is the screen I get. Can someone please show me how to open the Mumble app? Thanks John W4BAY

Anyone have a good camera suggestion for focus on an IC-7300 display? Tnx

Hello I just deployed a RigPi with version 2. I purchased the MFJ-5713DK for the rear din port of my TS-2000. When I plug in the cable the radio the receive of the radio goes dead. No audio, no S Mete

This recurring issue is my only issue of note with the RigPi V2.00! Setup: RSS V2.00 Pi 4 8GB FT-991 Mumble Clients: RSS Desktop iPhone HP Laptop HP Desktop Android phone (Plumble) I cannot get audio

Hi All, Has anyone connected a SPE Expert amplifier working with RigPi 2. I am looking for basic operation. I have a rs232 to USB converter to connect it. Any thoughts or suggestions welcome. 73's Dav

Just checking with the group to see if anyone has a solution to trigger the ATAS through RigPi yet. I have an 847 and an 857 and would to have this slick system remote controlled. Anyone succeed with

Has anybody connected an IC705 to rigpi 2.0? I am not able to connect Sent from my Note20 Ultra on T-Mobile 5G

Hello Howard, This may be a crazy question, but here it is. Will RigPi work on a Linux Mint 20 PC or does it have to be a Pi4 or Pi3. I have my rig currently connected to my Linux PC and would like th