Ic7300


Kurt Lautenschlager
 

I have been holding off setting the RigPi up to my IC7300

Has anyone succeeded in doing so and if so can you post the exact setup procedure?  I thought this was going to be PnP but it seems not 

I have had no issues with Remote Rig which required port forwarding etc... RemoteShack was even easier ... sorry I am rambling on just frustrated with all the issues I am hearing for a unit that is described as 1234.  But I have faith it will all work out


Kurt - W1WWA

On May 20, 2019, at 10:52, George Cox <georgecoxgccs@...> wrote:

Manuel W4SSB, I tried the same with a MFJ-5706MD for my Yaseu FT-991 and no luck.
de WB6OEB

On Mon, May 20, 2019 at 10:49 AM Manuel Maseda <mmaseda@...> wrote:
I’m attempting to use one of the MFJ-5713DI cables to connect an Icom 7100 to the RigPi.  I’m not getting any receive or transmit audio from the radio.  Am I supposed to install some jumpers on the header connector on the RJ-45 audio connector board?

Manuel W4SSB


vy2jc@...
 

I have an Icom 7300 and I need help in hooking it to my rig pie I am receiving on the laptop but I want to use it remotely on my Samsung cell phone can somebody please help me


Bo Barry <bobarr@...>
 

I found it very simple, following the guide. About 20 minutes. Adjusting the router was more challenging but the guide also helped there too.
Did you Google and download the two free programs Mumble and a VNC viewer?    Passwords are in the guide.
It is a very fascinating, complex, versatile, enjoyable venture, but a headache for a Linux bumbler who makes a lot of mistakes and keeps going.
Howard is of great help if you specify your problem.
73, Bo W4GHV


vy2jc@...
 

Hi thanks for the email I am wondering how do I download that to the program


From: RigPi@groups.io <RigPi@groups.io> on behalf of Bo Barry <bobarr@...>
Sent: Thursday, September 12, 2019 11:46:46 PM
To: RigPi@groups.io <RigPi@groups.io>
Subject: Re: [RigPi] Ic7300
 
I found it very simple, following the guide. About 20 minutes. Adjusting the router was more challenging but the guide also helped there too.
Did you Google and download the two free programs Mumble and a VNC viewer?    Passwords are in the guide.
It is a very fascinating, complex, versatile, enjoyable venture, but a headache for a Linux bumbler who makes a lot of mistakes and keeps going.
Howard is of great help if you specify your problem.
73, Bo W4GHV


Mark Weisheimer
 

Joe,

There is a very thorough guide that includes using RigPi with the IC-7300 in the files section.
It may be overly thorough, but all of the information is there:

https://groups.io/g/RigPi/files/Homebrew%20Information%20from%20Users/RigPi%20Installation%20For%20Icom%20USB%20Radios.pdf

There is another guide too, with fewer details:

https://groups.io/g/RigPi/files/Rig%20Configuration%20Information/ICOM/ICOM%20IC-7300%20Setup.pdf

There is also a thread by Howard at:

https://groups.io/g/RigPi/message/442

There are a number of message threads on the IC-7300, you can find them using the search tool at the top if you use IC-7300 as the subject.
To answer your question directly would require a tad more info from you.
Which program are you asking about downloading?
If it is Plumble for the Android (that is the Android version of Mumble) you go to the Google Play store and download it from there.
Same for VNCviewer if that was what you are asking about.
Lots of folks ready to help.

--
73 - Mark - K8MHW
'A RigPi Enthusiast!' - I am not otherwise affiliated with MFJ or RigPi


Joe Clements <vy2jc@...>
 

Okay thank you how do I get the program to work on my Samsung S10 do I need an app or something?


From: RigPi@groups.io <RigPi@groups.io> on behalf of Mark Weisheimer <mweisheimer@...>
Sent: Friday, September 13, 2019 8:57:24 AM
To: RigPi@groups.io <RigPi@groups.io>
Subject: Re: [RigPi] Ic7300
 
Joe,

There is a very thorough guide that includes using RigPi with the IC-7300 in the files section.
It may be overly thorough, but all of the information is there:

https://groups.io/g/RigPi/files/Homebrew%20Information%20from%20Users/RigPi%20Installation%20For%20Icom%20USB%20Radios.pdf

There is another guide too, with fewer details:

https://groups.io/g/RigPi/files/Rig%20Configuration%20Information/ICOM/ICOM%20IC-7300%20Setup.pdf

There is also a thread by Howard at:

https://groups.io/g/RigPi/message/442

There are a number of message threads on the IC-7300, you can find them using the search tool at the top if you use IC-7300 as the subject.
To answer your question directly would require a tad more info from you.
Which program are you asking about downloading?
If it is Plumble for the Android (that is the Android version of Mumble) you go to the Google Play store and download it from there.
Same for VNCviewer if that was what you are asking about.
Lots of folks ready to help.

--
73 - Mark - K8MHW
'A RigPi Enthusiast!' - I am not otherwise affiliated with MFJ or RigPi


Joe Clements <vy2jc@...>
 

And another thing I'm not very good at computers it would be some nice if I could get one of you guys are girls on the radio on HF


From: Joe Clements
Sent: Friday, September 13, 2019 9:10:36 AM
To: RigPi@groups.io <RigPi@groups.io>
Subject: Re: [RigPi] Ic7300
 
Okay thank you how do I get the program to work on my Samsung S10 do I need an app or something?


From: RigPi@groups.io <RigPi@groups.io> on behalf of Mark Weisheimer <mweisheimer@...>
Sent: Friday, September 13, 2019 8:57:24 AM
To: RigPi@groups.io <RigPi@groups.io>
Subject: Re: [RigPi] Ic7300
 
Joe,

There is a very thorough guide that includes using RigPi with the IC-7300 in the files section.
It may be overly thorough, but all of the information is there:

https://groups.io/g/RigPi/files/Homebrew%20Information%20from%20Users/RigPi%20Installation%20For%20Icom%20USB%20Radios.pdf

There is another guide too, with fewer details:

https://groups.io/g/RigPi/files/Rig%20Configuration%20Information/ICOM/ICOM%20IC-7300%20Setup.pdf

There is also a thread by Howard at:

https://groups.io/g/RigPi/message/442

There are a number of message threads on the IC-7300, you can find them using the search tool at the top if you use IC-7300 as the subject.
To answer your question directly would require a tad more info from you.
Which program are you asking about downloading?
If it is Plumble for the Android (that is the Android version of Mumble) you go to the Google Play store and download it from there.
Same for VNCviewer if that was what you are asking about.
Lots of folks ready to help.

--
73 - Mark - K8MHW
'A RigPi Enthusiast!' - I am not otherwise affiliated with MFJ or RigPi


Howard Nurse, W6HN
 

Joe, you can control RigPi from the browser on your Android phone.  For VoIP, look for Plumble on the Google Play store.  Plumble is the Android equivalent of Mumble, it is free.

--Howard


Joe Clements <vy2jc@...>
 

Thank you I have the Columbo Mambo app and it wants information to login what do I put in there?? Under label address password and username what do I put there??


From: RigPi@groups.io <RigPi@groups.io> on behalf of Howard Nurse, W6HN <hlnurse@...>
Sent: Saturday, September 14, 2019 2:09:05 PM
To: RigPi@groups.io <RigPi@groups.io>
Subject: Re: [RigPi] Ic7300
 
Joe, you can control RigPi from the browser on your Android phone.  For VoIP, look for Plumble on the Google Play store.  Plumble is the Android equivalent of Mumble, it is free.

--Howard


Howard Nurse, W6HN
 

Joe, I suspect there is a typo in your message, I assume you have Plumble now installed.  As with all connections to Mumble, the password is 7388, and username can be your call or any other username you choose.  Note the username must be unique for each connection.  The address is the LAN IP 1 address you will find in RigPi>SETTINGS>System (if at home) or the WAN IP address if away from home.  If away from home you must set up port forwarding on your router as detailed in RigPi Help.

--Howard