I just posted macros for Rig π ver 1.5 and rig π ver 2.0. The version 1.5 is a word document. The ver 2 are exported macro files that version 2.0 generated. They are in the folder ftdx 3000 macros und

what is flashing on the tuner screen nest to the mode label. It says RPRT-5 next to the mode label every 5 -10 seconds. It is there very briefly What does it mean ? Also does anyone know how to increa

Mark contact me off the list I have Rigπ setup on 3 FTdx 3000's 1 for me and 2 others for Hams operating remotely from Florida I also have an extensive list of macros that allow operation of all the f

#ftdx3000

Dave the PDF is under files > rig configuration information > Icom > Icom 7300 It is a PDF. There are 2 other documents in that same folder related to the 7300 73 Russ

I thought there was a detailed file located in files section that gave a step by step instructions for setting up rig π with the IC 7300 73 Russ W4PGT

Hi glen YES it does the same thing with the usb 2 ports. . It disconnects mumble I think when there is a noise burst. What bran isolator do you use ? Tnx Russ W4PGT

#ftdx3000 #cat #yaesu

Chris I had the USB port on my FT 3000 die last February while working with RIGpi Yaesu replaced the board under warranty even though I had the radio 15 months. Bought a USB Isolator to protect the US

#ftdx3000 #cat #yaesu

Bruce If you are receiving audio OK from the Radio but not able to get transmit audio into the radio then once the mumble client is connected on I phone try muting and deafening the client on the I ph

Bruce are you using an I phone or I pad for the remote ? 73 Russ W4PGT

I noticed that RIG π VER 2 seems to change my mic gain on its own. If it is set to 10 on the slider the mic gain is set to 30 on the radio. I usually run the radio mic gain around 14 to keep from over

Does any have a link to what the Mumble status icon colors mean ie/ green vs blue ? tnx Russ

I am still trying to figure out how to keep the mumble client / server connected when running the system on my pi 4 It works fine on the 3B+ with no drop outs or problems. Logs show that the client di

I am still trying to figure out how to keep the mumble client / server connected when running the system on my pi 4 It works fine on the 3B+ with no drop outs or problems. Logs show that the client di

Downloaded and installed RP ver 2 and ran it on my Pi 4 2 gig Mumble auto starts as expected but shortly after linking with the outside client the 2 become disconnected. If you go to the setting menu

Bruce, Try muting and deafening mumble on the I phone and then unmute & Undeafen mumble . You should now have audio to the transmitter. This worked for me and several others. It seems to be specific t

With the advanced set up I tried to see if the meter on the tuner screen will display the VSWR that the radio sees. I have a FT 3000 and it appears to be supported in the radio capabilities list but d

I have been helping another ham get his Rigpi up and running. He wanted to use most of the macros I had written for the FT 3000, but I did not want to spend another couple of hours typing this cryptic

Try muting and deafening the mumble client on the I phone. then unmute undeafen the mumble client. This worked for me and several others. Really it works I found out about it by mistake on my I Pad. G

#audio

SOLD ! I have for sale a band new never used MFJ 1234AB audio interface card for the rig pi. I bought it thinking I would need it for the rig pi and my FTdx 3000. As it turns out the only thing needed

Here are the Macros I have installed on my RigPI for the FTdx 3000. Use them if you wish & I hope it will provide guidance for those who wish to write there own They are in the Attached PDF file 73 es