Real SATA or USB conversion? Mike WB8CXO

Short answer YES! For $299 you get a complete RigPi package, RasPi, soundcard hat

Hi Howard, did you get it working? Mike

YEA!

Hi Jim, That’s a good question! How do you normally access the radio? Ethernet or USB interface and what software? GNU radio? Maybe someone in the ETTUS USRP community has written Remote Access AP for

Ed, try going to Settings>Advanced Radio and click on "Disable Split Polling". Its on the right side (column) of the screen. Mike WB8CXO

RemoteHams is limited to windows and android client and server hardware. RemoteHams is Great! I have used it! Rigpi runs on a Rasberry Pi ($30.00 or one is on your shelf) and $40.00 software from MFJ

Howard, I apologize for Garry! Mike WB8CXO

Manuel, VERY GOOD! Congratulations!!!!! Good luck with the 7100! Mike WB8CXO

The FRG-100 is on the list. Isn’t the IC-A24 an aircraft band hand held? It’s not on the list. IC-2725 not on the list. I looked at the manual and got the impression it’s not fully CAT controllable. L

RigPi uses the Hamlib library for radio support. Here’s a link to check out: http://hamlib.sourceforge.net/sup-info/rigmatrix.html#parms313 Hopefully your radios listed. Mike WB8CXO

I’ve not used CI-V on an IC-718 myself so we’re both learning until someone else who has jumps in to help! To learn more about it refer to the 718’s user manual and Hamlib. User manual is easy so that

RigPi supports the modes the radio connected to supports for the most part.

Hi Adam, At Hamvention but will try to help. Also your screenshots get blurry when I zoom in with smartphone. Goto Settings>System>there’s a button to power down the Pi. Click it to gracefully power d

Hi Manuel, if you plug in a hmdi screen into your RigPi also a keyboard and mouse (usb wireless works great)... When you boot the RigPi it wIll boot to the Pixel dashboard. Clicking the pi symbol will

Garry, this works well and as Harold sez no need to remove the sd card. I’ve used it several times on my RigPi during beta test! Have Fun! 73 Mike WB8CXO

Garry, Beta testers have successfully interfaced the RigPi to both the 7300 and 7610. You simply connect the USB port of either radio to the RigPi’s USB port. Both Cat control and audio are available

Well we'll see what Howard sez. .I got the impression digital modes were intended for local ops but ya still got the issue of splitting CAT and Audio between the digital software and RSS. Mike

David, I looked at the IC-7600 manual and it looks like it has an internal soundcard. I recently found this document that might help http://www.dxlabsuite.com/dxlabwiki/ConnectingIcom72007600 Here's a

I have successfully interfaced the Elad FDM-DUO to RigPi. The FDM-DUO uses two USB connections, one for CAT, the other for the internal soundcard audio. RigPi handles it fine. CPU utilization is about