Howard, Will these updates be installed with the next RSS release? This should be an automatic update from MFJ support shouldn’t it?

Howard- I’m getting 4.2v and it goes to ground when PTT is pressed. Jeff

Hi Howard - I can check voltage and continuity. I seated the jumper to match the notch on the socket. It looks ok visually, but could have a bad solder joint. Can you direct me to the pinout voltages

Hi Howard - I confirmed that the mic on the radio is live and modulates the carrier when I engage the RigPi PTT to transmit. This is true for both SSB and 2m FM modes. Is that due to internal wiring o

Hi Howard - I tried the other cable with the same results. I also tried to unplug the hand mic from the radio , but RigPi reported an unknown error and wouldn't connect. Its looking like I need to sel

Could MFJ have wired the cable incorrectly? I have another cable that I was using for a Signalink unit that I will try.

If you mean is it plugged into the radio, yes. It is a hand mic, so the PTT switch is not pressed.

Hi Howard - There was no modulation from the radio. Jeff

Hi Howard, The audio tests worked properly after I shut down Mumble. I am using the data port for audio. The Internet connection appears to b wrking now except fo rthe following: Something new just ha

HI Howard, This may be a false alarm. I just connected/disconnected using DNS and the RSS terminal did not give me an error message. Maybe I was doing something out of sequence. The following except f

I may have spoken too soon- it seems the transmit audio isn’t working properly. PTT is working and I can key the transmitter, but audio is not getting through. Verified with the local repeater. I’m go

I am using the data connector for audio. When Howard used VNC to access my server, he made several adjustments to fix the audio. I don’t know what he did. I’m hoping HamLib will update the FT-857 inte

Both LAN and remote - works great!

Hi Terry - Howard was able to access my RigPi and found that the Mumble app was set to push to talk for the audio input setting. It should have been set to continuous for it to work properly. I am now

Hi Terry - This has turned out to be a marathon, but I’m getting there step by step. My initial trouble connecting the rig was actually the baud setting on the radio itself. Once it was corrected, RSS

Hi Howard- The arrow keys are on the keyboard used to navigate DOS programs. I am running alsamixer when the audio comes on when I press the key. Yes - I plugged in the jumper block when I received th

I have established rig control and Mumble from my remote iPhone, but cannot get audio to work. Strangely, I can get receive audio when pressing the up arrow or the push to talk button on the pop up wi

Thanks Bryan! I think I figured this out. The RSS kept losing the WiFi signal, so I ran an Ethernet cable to the unit. I forgot that the cable was connected directly to the isp modem, so it was direct

When I checked the system settings, both the LAN and the WAN had the same IP. In the router, the IP assigned to RigPi was the normal internal IP. I’ve rebooted RigPi but still get the same IPs. Is thi

Thanks Howard - Menu item 19 had been masked and when I unmasked it, I was able to set the baud rate and connect. Now on to remote operation. 73, Jeff KB5CT