Hi Kevin, You can see the available options for the radio in Advanced Settings->Radio Capabilities. I don't see SWR listed in the Get level list. Your radio CAT manual should tell you if that is even

#ts2000

Sounds like a good plan. I didn't think of trying like that. Thanks!

#ts2000 #hamlib

Jim - I have the same issue. It should stay at like 98 or 99 watts. It is like somewhere the code is it off by a digit. For example if I want to set power to 80 watts, I set it to 79 watts. So if you

#ts2000

Perry, I know what you mean. I've used that program too and remember reading that! I did go ahead and program macros to just enter the frequencies into VFO A along with PL tones for 2 meter repeaters.

#ts2000

RigPi treats slider values as integer percentages. My IC-7300 settings window shows output power the same way, as an integer percentage. Hamlib treats set/get values as floating point. If The radio is

#ts2000 #rigpi

Doug, please tell us a bit more. What isn't working? PTT or audio switching? Are you using an MFJ RJ-45 cable to connect to your ACC2 connector on the radio? Can you confirm what pin is connected to t

#ts2000

Doug, the TUNE button on the macro bank keys the RigPi Keyer board. The whine is the Keyer sidetone. You can reset tune by using the Esc key. TUNE is intended for those who have manual tuners. --Howar

#ts2000 #rigpi

I enjoy following along for the TS-2000 keep the info coming. I've got one that I would love to remote. 73 dave wa3gin

#ts2000

HI Don, Are you able to control the VHF/UHF transceiver of the TS-2000 using RigPi? Thank you, dave wa3gin

#mumble #ts2000

I placed higher resolution shots in the photo section 73 Don W6CZ DM07bk

#ts2000

Closing Mumble and restarting before reboot makes the new setting stick. Thanks Howard.

#fldigi #mumble #ts2000 #audio