OK while working on this problem... and at a point when I was doing nothing... The computer audio started being received by the Mumble server. Out of the Blue... Android still acting like it is sendin

#audio #ft-991a #mumble #rigpi #rss

Dear all I am having an issue configuring RigPi2 on a RPi4 (4GB) with a SignaLink. Basically, I’m not getting any audio out. Points of note: 1) From the speaker icon on the top right panel, there is n

#alsamixer #audio #mumble

Never really had RigPi working correctly since I had it for over a year. I have been testing the TX audio on 2 Meters. My TX audio is very lite. After I TX my audio echoes three times. The RX Audio se

#audio #mumble #icom

Reloaded mumble on my phone and I am unable to connect now.....i had it working but i decided to delete and reload i was having TX issues.

#mumble

HI Don, Are you able to control the VHF/UHF transceiver of the TS-2000 using RigPi? Thank you, dave wa3gin

#mumble #ts2000

The process worked great for me. No problems encountered... Perry K4PWO Sent from my Sprint Samsung Galaxy S10+. Get Outlook for Android

#mumble

Closing Mumble and restarting before reboot makes the new setting stick. Thanks Howard.

#fldigi #mumble #ts2000 #audio

OK. somehow I've managed to solve the issue and it is working fine from the iPad. thanks radiorusso for the tip!

#ic-7300 #mumble

Thanks Howard. I’ll give it a try. 73, Don WG0C

#mumble

Mac, can you connect two devices, such as a phone and laptop, to the Mumble server? Can they hear each other? --Howard

#mumble #ft-991a #audio #rss

Hi Mac, You can certainly update Mumble to the latest version. The latest Mumble client is 1.3. However, it is unlikely the problem you are seeing is caused by using an older version. Is receive audio

#ft-991a #rigpi #audio #rss #mumble

thanks for all the input! I have a verizon fios modem , which come to find out is very finnicky with port forwarding. I had to designate the Rigpi as a dmz server in order to allow mumble to connect r

#audio #mumble

Howard, The heat issues with the PI 4B have been greatly reduced with firmware updates in the last 6 months. It was a USB firmware issue that caused much of the heating. Now is just CPU utilization th

#ft-991a #mumble

I have mucked up my Certificate Authentication and when I try to connect to the server, it says wrong password. How can I reset this to get it working again.

#mumble

Hi Howard, Thanks for your response and the explanation how the PTT works and expectation of the transmit status from the radio. It makes sense. It is good that the TX/RX function works. It just becom

#icom #mumble #audio

It worked !!!

#mumble

I reloaded mumble on my phone....everything is up and running...only used my WAN address... Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone

#icom #mumble

Hi Lee, All Mumble/Plumble clients must have Transmission set to Continuous. There is no PTT connection between RigPi and Mumble/Plumble clients. —Howard

#mumble

Robin, I have you Icom 756 Pro III documentation in the files section. Have you read this document? Look at it and see if this gets you going. https://groups.io/g/RigPi/files/Rig%20Configuration%20Inf

#cat #icom #jumper #mfj-1234 #mumble

Excellent, the feedback is normal when you have several mic’s open in the same place. Yes, the problem could be with the audio board, however the 991 supplies audio through the USB CAT cable. If that

#mumble