Hi, My equipments consists of: FTDX-5000 Microham Digikeyer II Soundcard Win4Yaesu to control extra comports All this is connected up and works fine for all my uses - SSB, FT8/FT4, Fldigi CW, PSK etc

#ftdx5000 #mfj-1234

Perry and Paul, Thanks for the comments. Unfortunately, my opportunity to follow up on this has passed until after I return from my trip. When it comes to Bell Canada, it is typically very difficult t

#ic-7300 #mfj-1234 #mumble

Sorry about that Andy. I was called away and when I got back, my cat was sitting on the keyboard. Totally locked up my session! To continue about the USB Identifier. I did as you suggested but what sh

#rigpi2 #mfj-1234 #fldigi #wsjt-x

Hi Jorgen, The IC-7610 has built-in CODECs for audio. You don't need the RigPi Audio Board. The only way to hear CW being sent is by turning on the MON function on your radio. There will be day in wha

#mfj-1234

Update instructions to wsjt-x version 2.5.0 https://www.pianetaradio.it/blog/wsjt-x-su-raspberry-pi/

#mfj-1234 #wsjt-x

Mark When I plug the power supply in there is no LED’s that light up. I will contact MFJ because it is still under warranty to see what they say . Thank you for your information Tom and Heidi WD8EFF &

#mfj-1234

Thank you Howard, all works perfectly now. Thank you for all your great work on the RigPi, it just keeps getting better!!! Happy Holidays and stay safe! -Ron K6RPT

#mfj-1234

I have to check that. Bad thing is when I have the PI connected to the monitor, I can not access the monitor’s functions. When I connect it to another laptop, all works fine. I would check the resolut

#anytone #mfj-1234

No wonder I don’t get replies , my radio is an FT 817nd not an 810 as I mistakenly called it. Sorry about that Ian

#commands #mfj-1234 #remote #yaesu #cat

Ok, so would one have to set the macro buttons to one level of adjustment ( ie different filter bandwidth buttons) instead of a slider ? Is there a way to add a slider or dial to adjust these settings

#mfj-1234 #yaesu #rigpi #audio #commands

Starting to figure out how to program the Macros in the 991a. I can now make squelch adjustments and a few other items not mentioned above but one that I'm having trouble with is finding the CAT comma

#memory #yaesu #hexadecimal #macros #mfj-1234

Nelson, This is Ray Webb. First I hope I you are the same Nelson Linkous I worked with at AEP, and second, what a great surprise to see your post about the RigPi. I was thinking of getting one of thos

#memory #mfj-1234 #ft-991a

Howard, Thanks very much. I have it running on my Android and I only could find Plumble-Mumble not just Mumble. I have it working the radio but not the audio on the cell. I will have to go back into m

#mfj-1234

Mac, Did you solve this riddle? I am at the exact same point with my TM-V71A. Any assistance would be greatly appreciated.

#jumper #kenwood #mfj-1234

Hi there... Howards SW is very interesting and attractive, for me living in the middle of Copenhagen I want to buy and test the software on my RPI and see if I need all the extra special made hardware

#mfj-1234

Robin, I have you Icom 756 Pro III documentation in the files section. Have you read this document? Look at it and see if this gets you going. https://groups.io/g/RigPi/files/Rig%20Configuration%20Inf

#cat #icom #jumper #mfj-1234 #mumble

The RigPi will connect to the radio using that RT Systems CI-V cable for CAT data which will allow bi-directional communication and control of frequency and functions. There is also a cable needed for

#icom #mfj-1234

My bad... Sorry for the typo. Here is the code I am guessing you are using: { var cMeterVal=pmeter.getByName("Slider1"); var mtr1=Number(tAData[4])+54; mtr=mtr1/5.5; cMeterVal.setValue(mtr, true); var

#ft-991a #mfj-1234 #rigpi #reversed

I looked up the schematic. I don’t think I damaged the RigPi either. The TS-2000 has a unity gain buffer amp to isolate the line output. I am going to check that. Mike

#mfj-1234

Good news, indeed! Thanks for your help resolving this issue, Ron! The problem occurs when using the “w” command for PTT. I have updated the code so when a custom PTT command is used, the line that sl

#mfj-1234